Raspberry Pi 3B+ GPIO extensions and HAT - Strona 9
Serial Expansion HAT - I2C, UART, GPIO for Raspberry Pi - Waveshare 15667
Shield with system SC16IS752 expanding the minicomputer Raspberry Pi with additional two communication channels of UART and GPIO ports programmable via I2C.HiFiBerry DAC Case + Zero i Raspberry Pi Zero - black
Black case for Raspberry Pi Zero and Zero W minicomputer and HiFiBerry DAC+ Zero overlay with external dimensions 80 x 40 x 40 mm.1 Wire Pi Plus DS2482 - 1-Wire module for Raspberry Pi
Shield for Raspberry based on DS2482-100 system which allows you to use the 1-Wire protocol. The module provides a conversion of the I2C interface. It has built-in a RJ12...Pi Supply On / Off - power switch for Raspberry Pi
Power switch in ATX style for Raspberry Pi. It cuts off the power supply, when the minicomputer is turned off from the operating system level. Module for self-assembly.Expansion Kit - extension Raspberry Pi to breadboard + tape + breadboard - Iduino RA028
A module that allows the GPIO Raspberry Pi pins to be led out onto the contact plate using IDC tape. The kit also includes a contact plate and 40-pin tape.1 Wire Pi Zero DS2482 - 1-Wire module for Raspberry Pi
Shield for Raspberry, based on DS2482-100 system, allows you to use the 1-Wire protocol. The module provides conversion to the I2C interface. It has built-in RJ12 connector,...Enviro pHAT - temperature, pressure, light intensity and proximity sensor - overlay for Raspberry Pi
Enviro pHAT is an overlay for Raspberry Pi with BME280 and LTR-559 sensors allowing to measure temperature, pressure, light level and proximity sensor. Additionally, the...JustBoom Digi Zero - sound card for Raspberry Pi Zero
Shield for Raspberry Pi Zero with high quality S/PDIF interface. It is used in the device, system has a resolution of 24 bit with the clock speed of 192 kHz. It has a...ADC Differential Pi - MCP3424 - 8-channel A/D converter
Module with high precision A/C converter in the form of shields for GPIO connectors of Raspberry Pi. It has 8 18-bit channels, analog outputs operating in Differential mode...Cytron HAT-MDD10 - two channel DC engine driver 24V / 10A - overlay for Raspberry Pi
Shield with dual-channel driver of motors operating with a voltage from 6 V to 24 V and current up to 10 A per channel (max. 30). The system can be connected directly with the...Pirate Audio Speaker -speaker with display - DAC for Raspberry Pi - Pimoroni PIM485
DAC amplifier cap for Raspberry Pi minicompouter. It has a built-in 1 W / 8 Ω speaker and a 1.3" colour IPS display. Additionally, the board is equipped with 4...Unicorn HAT Mini - LED RGB matrix - for Raspberry Pi - Pimoroni PIM498
Overlay for Raspberry Pi made by Pimoroni company. On the board there are 119 RGB LEDs in the form of 17 x 7 matrix . Thanks to the HT16D35A chip it is possible to...ReSpeaker 4-Mic Linear Array Kit for Raspberry Pi
ReSpeaker is a 4 microphone expansion board for Raspberry, designed for AI and voice applications. It allows you to build a powerful device that, among other things, supports...pHAT Stack – Raspberry Pi pins expander - solder yourself kit- Pimoroni PIM321
The pHAT Stack board connects to the Raspberry Pi via a 40-pin cable and increases the minicomputer's pin count by an additional five 40-pin goldpin strips . You can connect 5...- EOL
Air Quality Control - hat for Raspberry Pi - Kitronik 5038
Air Quality Control is another extension from Kitronik that allows you to expand the Raspberry Pi board and equips it with additional functionalities. The shield has pins...