Batteries require different types of contact elements to connect their findings with with rated for electronics. In some cases it is enough to contact with the flexible sheet metal, soldered directly on the PCB of the device. However, in many cases, the specialized connectors that provide not only the necessary energy efficiency as well as reliability of the connection and adequate protection against accidental short circuit. In this category you will find all sorts of connectors for batteries and a separate battery.
- New
- Reduced price
- Promotion
- Reduced price
- Promotion
32GB eMMC memory module with Linux for Odroid C2 - without adapter
Index: ODR-09883
- On sale!
- Promotion
- Reduced price
- Promotion
Allo I2S Isolator V1.3 Clean Power - galvanic isolator SBC - DAC
Index: ALL-18772
- On sale!
- Promotion
- Reduced price
- Promotion
Batteries connectors
Loading...
Adapter plug DC 5.5 / 2.1 - plug connector 6F22 battery 9V
Adapter that allows you to connect a popular 9 V 6F22 battery for DC 5.5/2.1 mm connectors used in development sets, for example, Arduino.
Index: AKC-01369
Index: AKC-01369
Battery clip 9V (6F22) with cable
A connector to facilitate the connection of popular 9-volt (6F22) batteries with cables with insulation removed at the ends.
Index: AKC-05502
Index: AKC-05502
Set of 5 wires with 2pin female plug, 2,54mm raster - 40cm
Cable 40 cm long on one side ended with 2 pin female plug - raster 2.54 mm on the other side with free wires for soldering. Set of five pieces.
Index: KAB-02704
Index: KAB-02704
Crocodile cables - 50cm, colorful 10pcs
Set of 10 colorful wires ended, on both sides, with connectors of crocodile type. Length of one element is 50 cm.
Index: KAB-03783
Index: KAB-03783
2-vein connecting cable is ended on one side with JST connector, pitch of 2 mm, on the other, with cables with the removed insulation. The length is about 10 cm.
Index: SEE-04394
Index: SEE-04394
Straight 2-pin Molex 51005 plug, 2mm raster with wire
2-pin, female connector Molex 51005 type with the cable with the length of 15 cm. Pitch is equal to 2 mm.
Index: KAB-07451
Index: KAB-07451
DC socket 5,5x2,1mm with 1 m wire
DC φ5.5 x 2.1 mm slot (for AC adapter) with 2-vein cable with the length of 1 m with the removed insulation at the end.
Index: KAB-03507
Index: KAB-03507
Power wires with JST - BEC socket
Double silicone cable completed with a slotof type "BEC", it is used to connect power from the rechargeable batterries and batteries.
Index: KAB-01340
Index: KAB-01340
Electric cube 12pin 4mm 3A/250V
The 12-pin electric cube allows you to connect the wires with a voltage of 250 V with the flow of current up to 3 A. Connection pitch is 8 mm, the maximum diameter of the cable...
Index: KAB-06894
Index: KAB-06894
Power supply wire with JST - BEC plug
Double silicone cable ended with a plug of type "BEC", is used to connect power from the rechargeable batteries and batteries.
Index: KAB-01442
Index: KAB-01442
Quick couplings UY*2 4CI-2007 - 5 pcs
Quick connectors used to connect two veins of the cables with diameter from 0.35 mm to 0.9 mm (19 - 26 AWG). Gel-filled for protection from corrosion and moisture. Price for 5...
Index: KAB-05373
Index: KAB-05373
Plug type XT60. The connector is used, among others for connection with Li-Pol packages . The housing is made of a material resistant to high temperatures, while the metal...
Index: KAB-07515
Index: KAB-07515
JST 2-pin plug straight, 2,0mm raster with cable
2-pin connector, type JST-PH with the cable with the length of 10 cm. The pitch is 2.0 mm.
Index: DNG-06563
Index: DNG-06563
Electric cube self-locking 2 pin 2mm 10A/380V - 10 pcs
The 2-pin electric self-locking cube allows you to connect the wires with a voltage of 380 V with the flow of current up to 10 A. Connection pitch is 10 mm, the maximum...
Index: KAB-03717
Index: KAB-03717
Quick couplings UY 4CI-2006 - 5pcs
Quick connectors are used to connect two veins of the cables with a diameter of 0.5 mm. Gel-filled for protection from corrosion and moisture. Price for 5 pieces.
Index: KAB-07533
Index: KAB-07533
XT60 type socket. The connector is used, among others for connections with li-pol packages. The cable length is 10 cm.
Index: KAB-07517
Index: KAB-07517
Pair of JST - BEC connectors for Li-Pol batteries
The set includes a pair of BEC (JST) connectors - socket, plug and plates.
Index: AKC-02865
Index: AKC-02865
Electric cube 3pin 10A/250V in case with strain relief boots
The 3-pin electric cube allows you to connect the wires with a voltage of 250 V with the flow of current up to 10 A. The maximum diameter of the cable is 3 mm. The whole is...
Index: KAB-08076
Index: KAB-08076
Electric case 2pin 10A/250V in case with strain relief boots
The 12-pin electric cube allows you to connect the wires with a voltage of 250 V with the flow of current up to 20 A. Connection pitch is 10.5 mm, the maximum diameter of...
Index: KAB-08074
Index: KAB-08074
DC 2,1/5,5mm plug with alligator clips
The power cable on the one side ended with power plug DC 2.1 / 5.5 mm, on the other, with the popular crocodile. It p rovides power connection from any source to the...
Index: KAB-01920
Index: KAB-01920
Electric cube 12pin 8mm 10A/250V
The 12-pin electric cube allows you to connect the wires with a voltage of 250 V with the flow of current up to 10 A. Connection pitch is 10 mm, the maximum diameter of the...
Index: KAB-06895
Index: KAB-06895
Electric cube 12pin 12mm 20A/250V
The 12-pin electric cube allows you to connect the wires with a voltage of 250 V with the flow of current up to 20 A. Connection pitch is 10.5 mm, the maximum diameter of the...
Index: KAB-06896
Index: KAB-06896
Cable with 2x2 pin plug, 2,54mm - 40cm raster - 5pcs.
Cable 40 cm long with 2 pin female connectors - raster 2.54 mm.
Index: KAB-02919
Index: KAB-02919
Electric cube self-locking 3 pin 2mm 10A/380V
The 3-pin self-locking electrical cube allows for the connection of cables with a voltage of 380 V with a current flow of up to 10 A . The connection grid is 10 mm, the...
Index: KAB-03716
Index: KAB-03716
Clips for battery 6F22
Popular batteries with 6F22 9 volt and has multiple levels prostopadłościennej case with radiators snaps, especially readily applied in multimetrach, various kinds of measuring non-electrical quantities (e.g., pirometrach), as well as many control panels of equipment for television and radio. To connect this type of battery electronics can be used plates that interact with correspondingly designed seat in the housing of the device, but much more frequently applied to the latch compatible with the radiator wires. In our offer you will find such connectors for batteries, battery 9 V (called colloquially "kijankami"), as with the wires for soldering, as with all DC plug 5,5/2,1 mm.
Connectors for RC batteries (standard JST)
In the case of packages of food-models with remote control and some mobile devices, love to use JST connectors. They have a shape close to the connectors "like a man" -women's BLS (compatible with goldpinami), but their design is more complex than in the case of simple connectors and sockets. The main difference is the body shape of the connector, when connected to the connector, at considerable length hidden in his niche. Due to the fact that the contacts are well insulated from external conditions and the built-in latch securely attached the two parts of the connector. This type of connectors for batteries used to connect power supply, for example, modules and drives. Provide a fast and reliable connection and disconnection that matters when replacing a package or patch in the model design in the field.
Cubes and quick connect power
In our offer you will find also a number of cubes electrical installation and fittings, ideal as connectors for batteries in cases where the leads of the package or a link to combine with the existing wiring of the device. Special attention should be paid to the orange cube switching that can carry a load of about 32 A. applications of modeling and robotics, should also pay attention to the XT60 connectors – power connectors for the battery (particularly lithium), offering a current load of approximately 65 A. these Connectors are a great solution for use with large packages of Li-Ion and Li-Po.