• EOL

3D printer - Creality CR-6 Max

Index: CRL-19968 EAN: 6971636409069
FFF/FDM 3D printer, which is manufactured by Creality. The device offers a large working area of dimensions: 400 x 400 x 400 mm with a carborundum glass surface. Creality CR-6 MAX is equipped with an upgraded leveling system, a filament sensor and a 32-bit motherboard with silent stepper motor drivers. The vertical part of the frame, on which the Z-axis movement takes place, was additionally reinforced with transverse supports, thus increasing the stability during operation. Dimensions of CR-6 MAX is 725 x 640 x 691 mm. The product is supplied as a kit for self-assembly.
3D printer - Creality CR-6 Max
€889.00
€722.76 tax excl.
Unavailable
Discontinued product
PayPal payment
CR-6 versions:
Manufacturer: Creality

Attention!

The product has been discontinued. Check other products in category.

Product description: 3D Printer - Creality CR-6 Max

FFF/FDM3D printer, which is manufactured by Creality. The device offers a large working area of dimensions:400 x 400 x 400 mmwith a carborundum glass surface. Creality CR-6 Max is equipped with an upgraded leveling system,a filament sensoranda 32-bit motherboardwith silent stepper motor drivers. The vertical part of the frame on which the Z-axis movement takes place was additionally reinforced with transverse supports, thus increasing the stability during operation. The dimensions of the CR-6 Max are 725 x 640 x 691 mm. The product is supplied as a kit for self-assembly.



3D Printer - Creality CR-6 Max.

Stabilna konstrukcja drukarki pozwala na druk szczegółowych modeli

Stableconstruction of the printer allows to print detailed 3D models.

Stable design

Creality CR-6 Max construction usesa double Z axiswith two trapezoidal screws driven by independent motors. The whole frame is stabilized by brackets placed at the back. Thanks to applied solutions the printer is very stable during work.

Dual Y-axis

Due to the large working area, Creality CR-6 Max has adouble Y axis with two synchronous toothed belts. By using this solution, the stability of the 3D printer and thus the quality of the final 3D prints is significantly improved.

Podwójna oś Y Creality CR-6 Max


Creality CR-6 Max dual Y-axis.

Unowocześniony system poziomowania

Upgraded leveling system.

Convenient device leveling system

The Creality CR-6 Max has an extremely convenientwork platform leveling system. The printer uses a special sensor that detects where the hotend heads touch the heating table during the calibration procedure. The automatic leveling system allowed to eliminate knobs on the bottom of the hotbed.

Modernized print head and felt feeding mechanism

Newly designed printhead with a new nozzle module provides efficient filament flow while maintaininguniform heat dissipation.

Improved filamentextrusion mechanism, enables easy loading of material for printing. Precise thermoplastic feed allows you to make even more accurate 3D models.

Zmodernizowana głowica hotend

Upgraded hotend head.

Precyzyjny czujnik filamentu

Precise filamentsensor.

Felt sensor and print resume function

The Creality CR-6 Max featuresa filament sensor that pauses the printer if it detects the end of the print material or if it is interrupted. The device also featuresa resume functionwhen power is restored.

Other 3D printer features

  • Convenient mounting brackets on the work table
  • Built-in storage compartment
  • Holder for spool offilament
  • Convenient and aesthetic cable connections
  • Worktable surface made of carborundum glass, showing excellent adhesive properties
  • 4.3'' touch screen display with intuitive menu
Pozostałe funkcjonalności Creality CR-6 Max

Other features of the Creality CR-6 Max.

Creality CR-6 Max 3D Printer Specifications

Technical specifications
Printing method: FDM
Supply voltage: 100 V to 240 V (AC - mains)
Output voltage: 24 V
Power: 500 W
Nozzle diameter: Standard: 0.4 mm
Supported filament: PLA, TPU, PETG, WOOD
Filament diameter: 1.75 mm
Print thickness: 0.1 mm to 0.4 mm
Accuracy: 0.1 mm
Display: 4.3'' touchscreen
Operating mode: USB, SD card
Print size: 400 x 400 x 400 mm
Nozzle temperature: 260°C
Table temperature: 90°C
Printer dimensions: 725 x 640 x 691 mm
3D - print surface 400x400x400 mm
3D - type of printout FFF/FDM
3D - accuracy of printing 0.1 mm
3D - hotend amount 1
3D - filament diameter 1.75 mm
3D - printing thickness 0.1 - 0.4 mm
3D - nozzle temp 260 °C
3D - table temp. 90 °C
Package width 80 cm
Package height 29 cm
Package depth 67 cm
Package weight 23 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: