- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: 3D Printer - Creality Ender-3 Max
A modified version of the hugely popularCreality Ender-3, the Max variation offers a larger workspace to create advanced models with maximum dimensions:300 x 300 x 340 mm. The device has an efficient cooling system, based on the operation of several fans. Ender-3 Max has an upgraded print head with a hotend equipped with a copper nozzle and an all-metal extruder. The device features aresume functionwhen power is lost. The dimensions of the3D printerdesign are 513 x 563 x 590 mm.
|
The kit consists of partially assembled components. |
Creality Ender-3 Max 3D Printer Assembly.
Sturdy construction of the Ender-3 Maxprinter.
Aluminum printer frame
The construction of the printer is based onan aluminium frame,which ensures great stability during operation. High-quality materials used in the process of creating structural elements of the printer allow to achieve even better precision during the creation of 3D models. In the Ender-3 Max the utility values of the 3D printer are combined with a highlyaesthetic appearance ofthe device.
Large workspace
The Ender-3 Max offers a large workspace, allowing you to create 3D prints with maximum dimensions of300 x 300 x 340 mm. This allows for much larger models than the basic Ender-3, while maintaining a consistently high quality. The surface of the heating table featurescarborundum glass, which provides increased adhesion, an almost perfectly smooth first layer and easy removal of finished 3D prints.
TheEnder-3 Max offers a large working area.
Precise movement of the printing elements of the device.
High precision of the printer
The mechanics of the movement of the printing elements in the Ender-3 Max is the responsibility ofasystem consisting ofa screw guidethat is responsible for movement in the Z axis,V profilesandpulleys. Thanks to their high quality, these components ensure a smooth and stable movement of the printhead.
Improved cooling system
The Ender-3 Max uses adouble cooling systemto increase the efficiency of heat dissipation. An axial fan continuously supports the head's heat dissipation. An air supply on both sides ensures rapid cooling of the extrudedfelt.
Two fans to cool the hotend.
Metal extruder and filament sensor in Ender-3 Max.
Metal extruder and felt sensor
The Ender-3 Max has anall-metal extruder for easy filament application. In addition, the printer is equipped with asensor, which immediately stops the printer in case of a break or the end of the printing material. It is possible to resume operation after reloading the filament.
Upgraded power supply and silent drivers
The Creality Ender-3 Max comes standard with a350W power supply. Silentdriversare used for the X and Y axis stepper motors. They effectively reduce the noise and vibration of the motors generated during the printer's operation. This significantly increases the comfort of using the device.
Efficient power supply and motor drivers.
Selected functionalities of the Ender-3 Max.
Other printer features
Creality Ender-3 Max hasa number of features and improvementsthat allow for more efficient use of the device. These include:
- Clear 3.5'' display controlled by a convenient rotary knob
- Supports both memory cards and USB communication
- Large knobs to facilitate the process of leveling the heating table
- Dedicated, easy to use filament holder
- Powerful stepper motors for precise movement
- Dedicated clutches to protect against excessive overload
- Additional, aesthetic cable protection
Technical specification Creality Ender-3 Max 3D Printer
| Technical Specification | |
|---|---|
| Supply voltage: | 115 V to 240 V (AC - mains) |
| Operating voltage: | 24 V (built-in power supply) |
| Total power: | 350 W |
| Display: | LCD |
| Printing speed: | Up to 100 mm/s (recommended 30 to 60 mm/s) |
| Printing accuracy: | ± 0.1 mm |
| Print thickness: | 0.1 mm to 0.4 mm |
| Nozzle diameter: | standard: 0.4 mm, |
| Supported filament: | PLA, TPU, PETG, ABS |
| Filament diameter: | 1.75 mm |
| Operation mode: | USB or from SD card, |
| File format: | STJ, obj, G-Code |
| Software: | Cura, Repetier-Host, Simplify3D |
| Print size: | 300 x 300 x 340 mm |
| Nozzle temperature: | 255°C max. |
| Work table temperature: | 100°C |
| Printer dimensions: | 513 x 563 x 590 mm |
| Weight: | 9.5 kg |
Useful links |
