- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: 3D printer - Anycubic Mega X
A 3D printerwith a300 x 300 x 305 mmworking area, manufactured by Anycubic. The device has amodernized extruder, adapted to work with flexible pillars, including TPU. The use of a double Y axis guide rail in the Mega X model improves the stability of the printing table. Two Z-axis guide screws increase precision and eliminate printing errors. The device is equipped with an improved power supply for increased operational safety. The printer is very easy to install. Its construction dimensions are 500 x 500 x 553 mm.
First steps with the Anycubic Mega X printer.
Comparison of the Anycubic Mega X and S workspace.
Anycubic Mega X workspace
The workspace of the Anycubic Mega X printer is300 x 300 x 305 mm. This area allows you to create large, complex projects. The table levelling system is based on four easily accessible knobs, located in the corners of the platform.
Modular printer design
The printer needs to be folded before work can begin. Due toits modular design, the installation of the device does not take much time, nor does it cause difficulties even for inexperienced users. The individual elements are very easy to fit together. As a result, the time to prepare the device for operation is very short.
Installation of the printer is quick and uncomplicated.
An extruder adapted to work with TPU subsidiaries.
Extruder adjusted to work with TPU
Anycubic Mega X has an upgraded extruder that is adapted to work with highly flexible materials. Apowerful extruderensures smooth movement offilaments, including TPU. This significantly improves the quality of final prints.
High precision
The Anycubic Mega X has a number of features to improve print precision.The metal, rigid framelevels out shocks generated during operation. Thedouble guide of the Y axisimproves the stability of the printing table. Thedouble screw of the Z axisincreases smoothness and accuracy of movement, reducing the risk of errors on finished models.
A number of improvements to improve stability.
Hotbed surface for easy printing.
Improved table surface for printing
Anycubic Mega X has a specially designedwork table surface. Depending on the temperature of the hotbed, it hasdifferent adhesive properties. At a higher temperature (approx. 60°C), special microholes on the table surface expand, increasing the adhesion of the printout. The low temperature causes their narrowing again, so that the finished models easily tear off the table.
Filament sensor and print resume function
The printer has two key features to protect your printing progress. An advancedfilament sensorstops the device if it fails to detect print material. Automaticresume when a power failure is rectified, allowing maintenance-free printing to start from where the failure occurred.
Functions to protect your work.
Anycubic Mega X 3D printer specifications
| Technical Specification | |
|---|---|
| Printing method: | FDM |
| Supply voltage | from 100 V to 230 V (AC - mains) |
| Power: | 350 W |
| Print speed: | max. 100 mm/sec, 60 mm/sec recommended |
| Nozzle diameter: | Standard: 0.4 mm |
| The filament served: | PLA, TPU, HIPS, Wood |
| Diameter of the filament: | 1.75 mm |
| Print resolution: | 0.01 mm |
| Print thickness: | from 0.05 mm to 0.3 mm |
| The precision of the XY axis: | 0.0125 mm |
| The precision of the Z axis: | 0.002 mm |
| Mode of operation: | SD card, cable |
| File format: | .stl, .obj, .amf, .dae |
| Software: | Cura |
| Print size: | 300 x 300 x 305 mm |
| Nozzle temperature: | 250°C |
| Table temperature: | 90°C |
| Printer dimensions: | 500 x 500 x 553 mm |
| The weight: | 14 kg |
Useful links |
