• EOL

3D printer - Anycubic Photon Mono 4K - resin + UV

Index: ANY-20657
Anycubic 3D printer with a work area of 130 x 80 x 165 mm. It uses LCD-based SLA Printing technology to form prints from photosensitive resin. In the device, a matrix of 15 diodes is responsible for the emission of UV light with a wavelength of 405 nm, which cures the printing material. The printing resolution of Photon Mono 4K is 3840 x 2400 pixels (4K). The structural dimensions of the presented 3D printer are 383 x 227 x 222 mm.
3D printer - Anycubic Photon Mono 4K - resin + UV
€328.50
€267.07 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Anycubic

Attention!

The product has been discontinued. Check other products in category.

Product description: 3D Printer - Anycubic Photon Mono 4K - resin + UV

Anycubic3D printer with a working area of 132 x 80 x 165 mm. It uses LCD-based SLA Printing technology to form prints from photosensitive resin. In the device, a matrix of 15 diodes is responsible for the emission of UV light with a wavelength of 405 nm, which cures the printing material. The printing resolution of Photon Mono 4K is 3840 x 2400 pixels (4K). The design dimensions of the presented 3D printer are 383 x 227 x 222 mm.



3D printer - Anycubic Photon Mono 4K - resin + UV.


Duże pole robocze

Large workspace.

Freedom of creation.

Anycubic Photon Mono 4K allows you to form models with maximum dimensions of 132 x 80 x 165 mm. The 1.7 l total working volume leaves enough space and freedom to create any cubic shape.

Vivid details thanks to 4K

With a resolution of 3840 x 2400 px, the Photon Mono 4K display has a total of over 9.2 million pixels. This is 122% higher than the LCD screens on Photon, Photon Mono, and models from other manufacturers using 2K displays in 3D printers. The high resolution makes 3D models take on vivid detail.


Rozdzielczość 4K 3840x2400px


4K resolution of 3840 x 2400 px.


Wyraźne krawędzie i narożniki w drukowanych modelach 3D


Clear edges and corners in 3D printed models.

High level of edge and corner accuracy

The Photon Mono 4K uses a 400:1 contrast ratio screen, which is 100% higher than Anycubic's Photon, Photon Mono and competing 200:1 contrast ratio 3D printers, so finished 3D prints have crisp, clear edges and corners.

Additional protective film

To better protect the high-end screen, the Anycubic Photon Mono 4K has a dedicated and replaceable anti-scratch film over the screen itself. This makes the display much more durable and resistant to mechanical damage.


Wysokiej klasy ekran zabezpieczony został folią


The high-end screen is protected by the film.


Porównanie szybkości pracy poszczególnych drukarek 3D

Comparison of working speed of different 3D printers.

High speed of work

With an impressive print speed of ≤ 5 cm / hour, the Photon Mono 4K can print a typical 12 cm high 3D model in 2.5 hours. This is 3.5 hours shorter than a similar attempt with the Anycubic Photon 3D printer. Fast printing does not degrade the quality of the final 3D prints.

Efficient light matrix

The matrix contains 15 bright LEDs. They provide an efficient light source that allows the Anycubic Photon Mono 4 to provide 90% light uniformity and an intensity of ≤ 27,320 lux on each layer. This enables faster printing.


W matrycy umieszczona 15 diod UV

15 UV LEDs are placed in the array.


Porównanie stopnia przepuszczalności światła

Comparison of the degree of light transmission.

High light transmission

The Anycubic Photon Mono 4K is equipped with a screen with 7% light transmittance, which is 2.5 times higher than the Anycubic Photon. The high light transmittance enables rapid molding of 3D resin models.

6.2'' screen

Anycubic Photon Mono 4K is equipped with a 6.23'' screen. It is 29% larger than the screen used in the Anycubic Photon (5.5'') and 8% larger than the display in the Photon Mono 3D printer.


Ekran w Anycubic Photon Mono 4K ma przekątną 6,23''


The screen in the Anycubic Photon Mono 4K has a diagonal of 6.23''.

Anycubic Photon Mono 4K specifications

Technical Specification
Printing method: LCD-based SLA
Power: 45 W
LCD display (part of the resin curing system) 6.23'' monochrome
Light Transmission: 7%
Contrast ratio: 400:1
Light source: parallel matrix (15 x LED)
Illumination intensity: 23905 to 27320 lux / 3500 to 4000 μw/cm²
Print resolution: 3840 x 2400 px (4K)
Horizontal resolution: 35 μm
Print speed: ≤ 5 cm / hour
Controls: 2.8'' TFT display
Communication: USB type A 2.0 socket
Software: Photon Workshop''
Working area: 132 x 80 x 165 mm
Printer dimensions: 383 x 227 x 222 mm
Weight: 4.3 kg
3D - print surface 165 x 132 x 80 mm
3D - type of printout UV - resin
3D - printing speed 50 mm/h
3D - UV wavelength 405 nm

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: