Significant progress in power electronics has made that a constant current can be changed by different methods using semiconductor elements that find wide application in electric DC motors, which are more and more often we can meet for both Amateur and professional. Starting from the smallest drones, electric cars to giant construction cranes. In each of these devices to work properly we will need the corresponding engine control.
Drivers for DC motors
L293D - two-channel 36V / 0,6A motor driver - 5pcs
Two-channel motor controller. Supply voltage up to 36 V. Average current per channel 600 mA (momentary up to 1.2 A). Housing: DIP 16 (through-hole). Set contains 5 pcs of chips.L298N - two-channel motor controller - 12V/2A
Module with dual-channel driver for DC motors L298. It is supplied with the voltage up to 12 V. Maximum current per channel is 2 A. The system has embedded voltage regulator 5...TB6612FNG - two-channel motor controller 13.5V / 1A - Pololu 713
Pololu module with dual channel DC motor driver. It is powered from 4.5 V to 13.5 V. The continuous current per channel is 1 A, when both channels are connected the value...TB6612FNG - two-channel motor controller
Two-channel H-bridge. Continuous current per channel 1,2 A momentary up to 3,2 A. Supply voltage up to 15 V. Housing SSOP-24 (SMD).DRV8835 - two-channel motor controller 11V / 1,2A - Pololu 2135
Two-channel driver for DC motors. Continuous current per channel 1.2 A (temporary up to 1.5 A). Power supply from 2.0 to 11 V.Cytron MD20A - single-channel motor controller 30V/20A
Single-channel DC motor controller based on MOSFET transistors. Enables control of motor speed through PWM channel. Continuous current per channel is 20 A (momentary 60 A)....Motor regulator DC 12-40V/10A/400W - with a speed control knob
A simple controller with an integrated rotary potentiometer to control the speed of a DC motor up to 400 W. Powered from 12 V to 40 V.L298N - two-channel motor driver
Two-channel H-bridge. Supply voltage: max. 46 V. Max. instantaneous current 2 A. Housing: Multiwatt15 (THT).L298N Dual H Bridge DC StepperMotor Driver Board - Iduino ST1112
L298N dual channel DC motor controller module. It is powered from 5 V to 46 V. The maximum channel current is 2 A. The chip has a built-in 5 V voltage regulator to supply the...Cytron MD13S - single-channel 30V / 13A motor controller
Single channel DC motor controller. Continuous current per channel 13 A (momentary 30 A ). Supply voltage from 5 V to 30 V. There is a Grove connector on the board.DRV8801 - single-channel motor controller 36V / 1A - Pololu 2136
Single-channel DC motor controller. Continuous current per channel 1 A (momentary to 2.8 A). Supply voltage from 8 V to 36 V.- Reduced price
- Promotion
Cytron MD10-POT - DC motors controller 30V / 10A + switch + potentiometer
Single channel DC motor controller allowing motor control by switch and potentiometer without the need for microcontroller and programming. Continuous current per channel 10 A...DRV8833 - two-channel motor controller 10,8V/1,2A - Pololu 2130
Two-channel driver for DC motors. Continuous current per channel 1.2 A (temporary up to 2 A). Power supply from 2.7 to 10.8 V.MAX14870 - single-channel motor controller 36V/1.7A - Pololu 2961
Single-channel DC motor controller. Continuous current per channel 1.7 A (momentary to 2.5 A). Supply voltage from 4.5 V to 36 V.two-channel h-bridge - SN754410NE
H-bridge - controller based on MOSFET transistors supplied with voltage from 4.5 to 36 V with current capacity up to 2 A.DFRobot HR8833 - two-channel driver for DC 10V/1,5A motors
A miniature, two-channel DC motor controller. The device operates on the basis of PWM signal. The motor supply voltage is from 3.3 V to 10 V, maximum current is 1.5 A.Simple DC 28V/3A motor driver - module with knob
Extremely easy to use, single-channel direct current motor controller with speed control knob. The device works on the basis of PWM signal. Power supply voltage is from 8 V to...Cytron MDD3A - dual-channel 16V / 3A motor controller
The Cytron MDD3A motor controller has the ability to control 2 DC motors or 1 stepper motor. Continuous current per channel is 3 A (momentary 5 A). Supply voltage is from 4 V...TB6552FNG - two-channel motor controller
Two-channel bridge H. Continuous current per channel 0.8 A, temporary to 1 A. Maximum supply voltage 15 V. SSOP-16 (SMD) housing.Cytron MD10C - single-channel 30V / 13A motor controller
Single channel DC motor controller. Continuous current per channel 13 A (momentary 30 A). Supply voltage from 5 V to 30 V .Cytron Maker Drive MX1508 - two-channel motor controller 9.5V/1A
Simple to use, two-channel DC motor driver with H-bridge. 1 A continuous current per channel (1.5 A momentary). Power supply from 2.5 V to 9.5 V. Output current at 5 V is 0.2 A.TB6612FNG - two-channel driver for 15V/1.2A motors with connectors - SparkFun ROB-14450
SparkFun module with two channel DC motor driver. It is powered from 2.7 V to 15 V . Continuous current per channel is 1.2 A. It has soldered goldpin connectors.DFRobot - Dual channel DC motor driver - 27V/7A
A two-channel DC motor controller. The device operates on the basis of PWM signal. Supply voltage for motors ranges from 6.5 V to 27 V, the maximum current is 7 A.DRV8835 dual - 2-channel motor driver 11V/1,2 A - Shield for Arduino - Pololu 2511
Dual channel DRV8835 module operates with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). The chip can be connected directly to Arduino board.What are the drivers for the DC motors and for what purpose they are used?
In the chain elektromaszynowych transmission, the driver of a DC motor is a device constituting an intermediate link between the control system and the power source and the motor. The control system is increasingly based on previously programmed the database and the task to transmit the corresponding control signals needed for proper engine operation, it is particularly important here that the signal of adjustable pulse width (PWM) that influences flowing through the motor, constant current, angle of its average value at certain time intervals, which leads to correct setting of the output power on the motor shaft and speed of rotation. Given that the majority of commercially available microcontroller has a limited output current to a few tens of milliamps, and the electric DC motors are characterized by the current consumption from a few to several tens of amperes requires the use of the system proxy, in the form of a special driver that solves the problem of adjusting the current feeding the motor.
Drivers high-power loads and large opportunities for cooperation with external equipment
On offer are Botland drivers DC motors can be used for engines with metal and plastic gear. In our assortment you will find the drivers in a wide range of voltages And operating currents with the needs of Your project. Most often, the engine control module of DC-based structurally on the bridge of the " H in the form of integrated circuits, or formulas, for MOSFET transistors, and its control through the interface involving the set of ports, inputs/outputs digital taking into account the signal generation pulse width modulation, so you can easily connect Your motor controller DC to complete the module that contains the MCU - also for these applications, you can buy special pads for Arduino, but there is also the possibility of the operation of the driver modules included with other platforms based on mikrokontrolerach, as drivers of General purpose engines. In addition, the store Botland available drivers DC motors that are compatible with the Raspberry Pi computers. In accordance with modern requirements in matters of cooperation between the systems peripheral devices offered by us drivers DC motors designed for data exchange via USB, UART, I2C, or TTL