Promotion products

Expanders

We offer extension modules conclusions this IP or small modules that allow the connection of additional lines I / o for the microcontroller. This is a great solution in a situation when the initial number of outputs not enough to accommodate all the tasks necessary to fulfill the purposes of the project. We have a wide selection of expansion modules that can expand the number of insights about the different number of contacts.

Products: 17
Loading...

TCA9555DBR - 16-bit I2C expander

The chip expands the number of microcontroller pins (e.g. Arduino). It communicates with the central unit via I2C interface. Extends the number of pins by 16 additional ones.
Index: MOD-15246
Index: MOD-15246
Shipping in 24 hours
Available, 24h shipping!
(Check quantity)
Regular price €2.26 Price €2.26

Gravity - I2C - 2x UART converter - DFRobot DFR0627 - discontinued

A module that allows to derive two UART interfaces from the I2C interface. The maximum transmission speed is 1 Mb/s , each UART interface has an independent FIFO buffer...
Index: DFR-16602
Index: DFR-16602
Discontinued product
Unavailable
Regular price €9.19 Price €9.19

Gravity - I2C - 2x UART converter - DFRobot DFR0627

A module that allows to derive two UART interfaces from the I2C interface. The maximum transmission speed is 1 Mb/s , each UART interface has an independent FIFO buffer...
Index: DFR-17311
Index: DFR-17311
Shipping in 24 hours
Available, 24h shipping!
(Check quantity)
Regular price €8.35 Price €8.35

PCF8574 I2C pin expander for Banana Pi

The module allows you to increase the number of digital outputs on Banana Pi with 8 bidirectional I/Os. It communicates via the I2C bus, the device can be connected in a cascade.
Index: BNN-03755
Index: BNN-03755
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.95 Price €2.09
  • Reduced price
  • On sale

PCF8574 - GPIO expander I2C 8-bit

The system allows to increase the number of devices connected to the I2C bus with 8 pieces. The system has 16 pins.
Index: UCC-04921
Index: UCC-04921
Waiting for delivery
Czas oczekiwania: ok. 10-30 dni
Regular price €1.56 Price €1.56

Gravity - MCP23017 I2C expander - 16 I/O - DFRobot DFR0626

The MCP23017 output expander allows you to expand the system with an additional 16 I/O ports via the I2C interface. It has a Gravity connector and standard goldpins. I2C...
Index: DFR-16601
Index: DFR-16601
Waiting for delivery
Waiting time about 10-30 days
Regular price €4.63 Price €4.63

DFRobot Gravity - analog signal isolator

The module prevents the operation interference of the sensors through the insulation of the analog signal and providing an isolated power for sensors. It is supplied with the...
Index: DFR-09529
Index: DFR-09529
Waiting for delivery
Czas oczekiwania: ok. 10-30 dni
Regular price €20.91 Price €20.91

Mux Shield II GPIO expander for Arduino - SparkFun DEV-11723

Shield for Arduino that allows you to increase the number of pins up to 48 pins that can operate as digital inputs/outputs and analog inputs. Board moves the connectors on its...
Index: SPF-03398
Index: SPF-03398
Waiting for delivery
Czas oczekiwania: ok. 10-30 dni
Regular price €33.72 Price €33.72

DS2413 - controller 1-Wire for 2 GPIOs - Adafruit 1551

The module is based on a DS2413 which has two GPIO pins type Open Drain. It also works with 1-Wire bus. The dimensions of the board are 16 x 10 mm.
Index: ADA-09716
Index: ADA-09716
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.26 Price €6.26

MCP23008-E / P - 8-channel I2C pin expander

The system allows to increase the number of pins (up to 8) of a microcontroller (including minicomputer Raspberry Pi). It communicates with the central unit via the I2C bus...
Index: UCC-06505
Index: UCC-06505
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.51 Price €1.51

ATSAMD09 Seesaw I2C - Adafruit 3657

Seesaw ATSAMD09 is a universal framework transducer which expands the number of pins for microcontrollers or microcomputers with I2C interface. It extends the board with...
Index: ADA-10319
Index: ADA-10319
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.26 Price €6.26

MCP23S08-E/P - GPIO expander SPI 8-channel

The system allows to increase the number of IOs (up to 8) of a microcontroller (including the minicoputer Raspberry Pi). Communicates with the device via the SPI bus.
Index: UCC-04589
Index: UCC-04589
Shipping in 24 hours
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.37 Price €1.37

Extenders findings

In the category of extensions we offer several different solutions. Our range includes small chips in PDIP for mounting THT (installation przewlekany), as well as more powerful modules (with wlutowanymi chips). To connect the device to the controller, use the pre-prepared socket (e.g., for I2C), conclusions, prepared for the installation goldpinów or goldpiny.

What do we offer?

Our product range includes a wide range of modules that are ready-made solutions. You can choose one of them to use in a simple, fast way of pins extending in is way, the capabilities of your microcontroller. We have devices that are adapted specifically for use with Raspberry Pi, Arduino and Banana Pi, but also suitable for other processors. We have, among other things, the expansion modules number of outputs 8 or 16 outputs (analog or digital, often also bi-directional pins). Can expand the number of output I2C, GPIO, PWM, and many others. Mux Shield II is the proposed extension module of the findings, designed for Arduino, which is able to increase the number of pins up to 48 pins (can work in two directions, as digital or analog inputs).

In offer we have also a small chip in the DIP package, designed for installation problems (THT). These devices are the cheapest way to purchase your own expansion module to expand the capabilities of its microcontroller. If you create your own device, in which the importance of its size or weight, this is a great solution for You. We offer modules that are ready projects that use such devices, but they are adapted for different tasks. You can create your own tile which will be optimized for the needs of Your device - just put your other necessary components and thereby save space.