Kolba grotowa do stacji lutowniczej ZD-8917B
Kolba grotowa do stacji lutowniczej ZD-8917B
Kolba grotowa do stacji lutowniczej ZD-8917B
Kolba grotowa do stacji lutowniczej ZD-8917B
Kolba grotowa do stacji lutowniczej ZD-8917B
Kolba grotowa do stacji lutowniczej ZD-8917B - zdjęcie 1
Kolba grotowa do stacji lutowniczej ZD-8917B - zdjęcie 2
Kolba grotowa do stacji lutowniczej ZD-8917B - zdjęcie 3
Kolba grotowa do stacji lutowniczej ZD-8917B - zdjęcie 4
Kolba grotowa do stacji lutowniczej ZD-8917B - zdjęcie 5

MMA8452Q - 3-axis I2C accelerometer - Qwiic - SparkFun SEN-14587

Index: SPF-12035 EAN: 5904422340599
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com

Sensor MMA8452Q is a 3-axis digital accelerometer. It allows you to measure acceleration in the configurable ranges. It communicates via the I2C bus, it is powered with the voltage from 1.95 V to 3.6 V. It has connectors Qwiic.

€10.58
€8.60 tax excl.
Waiting time: approx. 10-30 days
Waiting for delivery
30-day returns
PayPal payment
Manufacturer: SparkFun
Compatibility: Arduino

Description

The MEMS module allows you to measure acceleration in three axes in three-dimensional space. The device communicates via I2C bus. In addition, it has a built-in temperature sensor, embedded FIFO buffer and programmable interrupts that enable, i.a. the detection of free decrease.

 

The module has necessary for the correct operation of the system, passive elements. Pins are holes for soldering of the goldpin connectors(not included) that enable the connection of the the sensor viawires and directly attach to the breadboard,the module also has two connectors of Qwiic.

Since the maximum voltage with which the system works, is 3.3 V, to work with Arduinonecessary is a voltage converter. The exceptions are the modules, operating with voltages of 3.3 V, for example,Arduino Pro Mini 328 - 3.3 V/8 MHz.

 

The product is compatible with Arduino

The manufacturer has prepareda sample programfor users ofArduino.

 

Pins

The sensor has pins for mountinggoldpinconnectors - 2.54 mm pitch(not included, purchased separately and self-soldered).

 

Pin

Description

3.3 V

Supply voltage from 1.95 V to 3.6 V.

GND

The ground of the system.

SDA The data line of the I2C bus.
SCL

Clock line of the I2C bus.

INT

The interrupt signal.

INT

The interrupt signal.

 

Specification

  • The supply voltage: 1.95 V - 3.6 V
  • Current consumption: up to 165µA
  • Communication interface: I2C
  • Measuring range:±2g, ±4g, ±8g
  • Output data speed: from 1.56 Hz to 800 Hz
  • Digital output: 8-bit and 12-bit
  • Two programmable interrupts for six sources
  • Three embedded channels of motion detection
  • The definition of orientation
  • Interface of the 0x1D address: 0x1C
  • Board sizes: 26 x 26 mm

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

Raspberry Pi Zero Basic KIT

Set includes minicomputer Raspberry Pi Zero, housing and suitable power supply. To the kit also can be added a memory card with a chosen capacity.
Index: RPI-08847
Index: RPI-08847
In stock, shipping 24 hours!
(Check quantity)
Regular price €22.28 Price €22.28

VL53L1X time-of-flight - SparkFun SEN-14722

Digital sensor, connecting the proximity measurement using the method of time-of-flight and the ability to measure the intensity of ambient light. The working range is up to...
Index: SPF-12376
Index: SPF-12376
In stock, shipping 24 hours!
(Check quantity)
Regular price €28.13 Price €28.13

FeatherWing Non-Latching Mini Relay mini relay 250V/0.6 A - Shield for Feather - Adafruit 2895

The module from the Feather family is equipped with non-latching relay. It allows you to control actuators via the microcontroller. The maximum current is 2 A (at 40 V) and...
Index: ADA-06018
Index: ADA-06018
Waiting time: approx. 10-30 days
Regular price €10.10 Price €10.10

Feather M0 wi-fi 32-bit + connector.Fl - Arduino-compatible - Adafruit 3061

A small module with a 32-bit microcontroller ARM Cortex M0 ATSAMD21G18 known from Arduino Zero and with wi-fi ATWINC1500 module. Feather is designed for portable projects. On...
Index: ADA-05969
Index: ADA-05969
In stock, shipping 24 hours!
(Check quantity)
Regular price €44.98 Price €44.98

CC1101 433 MHz radio module - THT transceiver with antenna

A radio module (receiver and transmitter) operating in the frequency range of 433 MHz, with the SPI communication interface. Powered with the voltage of 1.8 V - 3.6 V, pins are...
Index: MOD-03698
Index: MOD-03698
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.53 Price €6.53

Metro M4 Express AirLift (WiFi) compatible with Arduino and CircuitPython - Adafruit 4000

Adafruit module fully compatible with Arduino Uno. It has 25 digital inputs/outputs, 16 PWM channels, 8 analogue inputs and popular communication interfaces. On the board there...
Index: ADA-14406
Index: ADA-14406
Available, 24h shipping!
(Check quantity)
Regular price €43.31 Price €43.31

LED strip RGB WS2812 5050 x 8 LEDs - 53mm

The strip consists of 8 individually addressed RGB LEDs 5050 with integrated driver. To control the module, one microcontroller's pin is sufficient. The module length is 53 mm.
Index: LED-06255
Index: LED-06255
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.24 Price €2.24

Kontakt U - spray 400ml

Preparation designed for cleaning and degreasing electrical components and contacts. It removes remaining dirt, grease, old lubricants, oils, silicones, sulphides. Protects...
Index: CHE-06604
Index: CHE-06604
Available, 24h shipping!
(Check quantity)
Regular price €3.80 Price €3.80

Gel flux RMA 223 - 5ml

Gel flux type "no-clean" is a very good quality active flux for elements such as BGA, SMD, PLCC. The container contains 5ml of the product.  
Index: NSZ-03883
Index: NSZ-03883
Czas oczekiwania: ok. 10-30 dni
Regular price €1.64 Price €1.64

5mm Kapton Tape

Captone adhesive tape resistant to high temperatures and chemicals. It leaves no traces of glue after removal. Roll width is 5 mm.
Index: NSZ-05538
Index: NSZ-05538
Available, 24h shipping!
(Check quantity)
Regular price €1.55 Price €1.55

Logic level converter 3,3V / 5V - I2C UART SPI

The module allows to exchange data between systems that use two popular voltages: 3.3 V and 5 V. It provides connection of interfaces: UART, SPI and I2C.
Index: MOD-01513
Index: MOD-01513
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.69 Price €1.69

Products from the same category

MPU-6050 3-axis accelerometer and I2C gyroscope - DFRobot module

Sensor for measuring acceleration and angular velocity in three axes. It is a combination of 3-axis accelerometer and gyroscope. It is characterized by simple operation, it...
Index: DFR-03888
Index: DFR-03888
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.45 Price €9.45

Grove - tilt sensor

A simple tilt sensor with digital output. It is powered with the voltage from 3.3 V to 5 V, it works with modules of Arduino and Raspberry.
Index: SEE-11358
Index: SEE-11358
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.51 Price €0.51

Digital compass HMC1022 - I2C/UART GY-26

The digital compass module based on Honeywell HMC1022 , which works on the principle of using magnetoresistance measuring the Earth's magnetic field in order to obtain the...
Index: GRL-14543
Index: GRL-14543
In stock, shipping 24 hours!
(Check quantity)
Regular price €22.48 Price €6.74
  • Reduced price
  • On sale

LSM6DS33 - 3-axis accelerometer and I2C/SPI gyroscope - Pololu 2736

Sensor allows you to measure 6 variables: acceleration X, Y, Z and angular velocity X, Y, Z. It is a combination of 3-axis accelerometer and gyroscope. It communicates via the...
Index: PLL-05331
Index: PLL-05331
In stock, shipping 24 hours!
(Check quantity)
Regular price €10.33 Price €10.33

IMU 10DoF - MPU9255 + BMP280 - 3-axis accelerometer, gyroscope, magnetometer and barometer - Waveshare 12476

The sensor is a combination of 3-axis gyro, accelerometer and compass. Allows you to measure acceleration, magnetic field and angular velocity in the configurable ranges....
Index: WSR-08298
Index: WSR-08298
In stock, shipping 24 hours!
(Check quantity)
Regular price €14.83 Price €14.83

DFRobot Gravity - vibration sensor

A simple vibration sensor with digital output. It is supplied with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04711
Index: DFR-04711
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.59 Price €2.59

MinIMU-9 v5 9DOF - accelerometer, gyroscope and magnetometer I2C - Pololu 2738

The sensor allows to measure 9 sizes: acceleration X, Y, Z magnetic field X, Y, Z and angular velocity X, Y, Z. It is a combination of 3-axis accelerometer and gyroscope...
Index: PLL-05528
Index: PLL-05528
In stock, shipping 24 hours!
(Check quantity)
Regular price €13.93 Price €13.93

BMA220 3-axis I2C digital accelerator - DFRobot module

Sensor for measuring acceleration in three axes in the range: ± 2 g, ±4 g, ±8 g / ±16 g. Powered with the voltage of 2.0 V to 3.6 V, it is characterized by small size, low...
Index: DFR-02987
Index: DFR-02987
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.49 Price €4.49

DFRobot Gravity - vibration sensor with piezoelectric membrane

Analog vibration sensor with piezoelectric membrane. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04713
Index: DFR-04713
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.58 Price €3.58

LIS3DH 3-axis I2C/SPI digital accelerometer - STEMMA QT - Adafruit 2809

Sensor for measuring acceleration in three axes in the range: ± 2g, ±4 g, ±8 g / ±16 g. Powered with the voltage from 3 V to 5 V. It communicates over the I2C or SPI bus.
Index: ADA-05295
Index: ADA-05295
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.05 Price €6.05

DFRobot Gravity - tilt sensor

A simple tilt sensor with digital output. It is powered with the voltage from 3.3 V to 5 V, it works with Arduino modules.
Index: DFR-04279
Index: DFR-04279
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.78 Price €1.78

FlexiForce Pressure Sensor - 25lbs - SparkFun SEN-09196

Piezoelectric vibration sensor, used for measurement of touch, vibration, shock and flexibility. A small AC voltage and high voltage up to 90 V, it occurs when the foil moves...
Index: SPF-10115
Index: SPF-10115
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.64 Price €6.64