• EOL

Carbon monoxide sensor - XC10 - 4,5V

Index: PRO-15353 EAN: 5900804068396

Sensor that detects the concentration of carbon monoxide (CO) in air. It is powered by 3 AA batteries. The average lifetime of the device is about 3 years. The sensor minimises the risk of carbon monoxide (CO) poisoning.

Carbon monoxide sensor - XC10 - 4,5V
€12.50
€10.16 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: eXtreme

Attention!

The product has been discontinued. Check other products in category.

Product description: Carbon monoxide (Chad) sensor - XC10

Sensor that detects the concentration of carbon monoxide (CO)in air.It is powered by 3 AA batteries. The average lifetime of the device is about 3 years. To keep the device fully operational, it should be tested regularly, at least once a week. The sensorminimises the risk of carbon monoxide (CO) poisoningby means of beeps and the red LED is lit if a dangerous gas is detected.

Czujnik tlenku węgla - XC10

Characteristics of the Carbon Monoxide (Chad) sensor - XC10

  • Permanent monitoring of carbon monoxide levels.
  • Audible and optical signal when a hazard is detected.
  • Signals when the battery needs to be replaced by an audible and optical message:
    • Lb" message on the display.
    • Beep every 30 seconds.
    • Green LED flashes every 30 seconds.
  • Test/Reset button to verify proper operation of the device and to reset it during an alarm.
  • If the sensor has previously indicated an alarm, it is possible to check the concentration of carbon monoxide that caused the alarm by holding down the Test button and resetting this value.
  • The sensor has an energy-saving function, a large 3-field LCD display and 2 green and red LEDs that indicate the operation and status of the alarm.

Alarm sensors in Botland!
Check out our wide range ofalarmsensorsthat willincrease the level of security in your home!

Carbon monoxide (Chad) sensor specification - XC10

  • Power supply for the device: 3AAbatteries(supplied)
  • Sensor sensitivity and response time:
    • 50 ppm - alarm in 60 to 90 minutes
    • 100 ppm - alarm in 10 to 40 minutes
    • 300 ppm - alarm in 3 minutes
  • Sound alert volume: 85 dB
  • 3-field LCD display
  • The power consumption of the device: < 80 mA
  • Operating temperature: 5°C to 40°C
  • Permissible ambient humidity: from 20% to 90% RH

The kit includes:

  • Sensor XC10
  • 3 AA batteries
  • Operating instructions
  • Mounting elements

Sensor - service ready-to-use device
Package width 11.2 cm
Package height 5.7 cm
Package depth 11 cm
Package weight 0.15 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: