• EOL

FireAngel ST-630 smoke detector with Z-Wave module

Index: TER-16287 EAN: 5909000850446

The high quality certified Fire ST-630 smoke detector has a Z-Wave module, which enables integration with devices operating in the Z-Wave intelligent home system. Thanks to Thermoptek technology, which combines an optical sensor with a thermal sensor, the device is more sensitive and responds faster to emerging smoke.

FireAngel ST-630 smoke detector with Z-Wave module
€79.00
€64.23 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: FireAngel

Attention!

The product has been discontinued. Check other products in category.

Product description: Smoke detector ST-630 + Z-Wave module

The high quality certified FireA ST-630 smoke detector has a Z-Wave module, which enables integration with devices operating in the Z-Wave intelligent home system.Thanks toThermoptektechnology, which combines an optical sensor with a thermal sensor, the device is more sensitive and responds faster to emerging smoke. Powered by a lithium battery for use for up to 10years.When a hazard is detected, a loudaudibleandoptical alarmis activated.

Czujnik

Smoke detector ST-630.

Sensor features

  • Compliance with standardEN14604:2005
  • Thermoptektechnology
  • Wireless communication with the moduleZ-Wave
  • Connection to the smart home systemZ-Wave
  • Lithium battery with a lifetime of up to10 years

Thermoptek technology

Thermoptek technology is a combination of optical sensors and thermal sensors. When smoke reaches the optical chamber inside the sensor, the smoke scatters the infrared light sent between the photodiodes. An additional temperature sensor monitors the rise in ambient temperature, and the combination of these two sensors makes the ST-630 smoke sensor react faster to an emerging threat.

Features of the module

  • Wireless communication at868.4 MHz and 869.8 MHz
  • Powered by the supplied CR2 3 V lithium battery

Zawartość zestawu

Set contents.

Installation of FireAngel ST-630 sensor to the surface

  1. Break out the holes in the mounting plate.
  2. Determine the position of the holes using the mounting grooves on the mounting plate.
  3. Drill the holes and insert the plastic dowels.
  4. Fix the mounting plate with the supplied screws.
  5. Attach the sensor to the mounting plate, the sensor will switch on automatically when it is properly connected to the plate.

Smoke detector specifications

  • Technology: Thermoptek, Z-Wave
  • Power supply: CR2 3 V lithium battery
  • Purpose: detection of different types of fire and smoke sources
  • Alarm volume: 85 dB
  • Storage temperature: -20°C to 60°C
  • Storage humidity: up to 93% RH
  • Operating temperature: 4°C to 38°C
  • Operating humidity: up to 90% RH
  • Certificates: EN14604:2005
  • Colour: White
  • Dimensions: 132 x 40.50 mm
  • Weight: 210 g

Sensor - service ready-to-use device
Package width 16.2 cm
Package height 16.2 cm
Package depth 10.5 cm
Package weight 0.328 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: