







Very loud horn car powered with a voltage of 12 V with a current consumption of up to 3 A. It makes a sound at 110 dB.
A very loud horn car with a power of approx. 36 W, it is powered with the voltage of 12 V. It makes a sound at 110 dB. Due to the large consumption of the current, when controlling from the microcontroller, applied should be the appropriate gain. For this, you can use the transistor amplifier or relay. The horn can be powered, for example, from lithium-polymer packs with nominal voltage of 11.1 V.
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia
Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain
No customer reviews for the moment.
Customers who bought this product also bought:
D1 R2 WiFi ESP8266 - compatible WeMos and Arduino
The module is compatible with Arduino, based on ESP8266. It has the ability to connect to wi-fi, and 11 digital inputs/outputs, 10 channels of PWM, 1 analog input, as well as...GamePad - a wireless controller with a receiver
Wireless controller with receiver that can be connected to any microcontroller, including Arduino and use, for example, in controlling the robot. The distribution of buttons is...USB 3.0 connector type A - THT
Slot compatible with the USB 3.0 standard, type A in the THT case.Relay module 4 channels with optoisolation - 10A/250VAC contacts - 5V coil
The module is equipped with four relays JQC-3F with a coil powered with a voltage of 5 V with optical isolation of input and mounting holes. The system allows you to control...Case for Raspberry Pi camera - Carbon Fiber Color
Plastic housing to protect the Raspberry Pi mini-camera. It ensures simple "click" mounting, has holes of 4.1 mm diameter for fixing screws.DC 2.1/5.5mm cable 35cm with switch
Cable terminated with a 2.1/5.5 mm plug and socket with a built-in switch. It allows you to disconnect the power supply without removing the power supply from the mains...Camera HD D OV5647 5Mpx camera - for Raspberry Pi - Waveshare 11297
Camera module with OV5647 sensor, connected to a special connector of minicomputer Raspberry Pi, version 3, 2, B+, A+ and older A and B. The device has a matrix CCD 1/4" with...Set of heat sinks for Raspberry Pi with thermoconductive tape - 3pcs
Set includes three radiators which provide cooling for minicomputer Raspberry Pi in versions: A, B, B+, 2 and 3. They are suitable for chips placed on the board and emitting...Set of copper radiators for Raspberry Pi 3/2/B+/Zero with thermal conductance tape
The set includes two radiators, made of copper, which provide cooling for minicomputers Raspberry Pi 3 B, 2 B, B+ and Zero. They are suitable for chips located on the board...CC1101 433 MHz radio module - THT transceiver with antenna
A radio module (receiver and transmitter) operating in the frequency range of 433 MHz, with the SPI communication interface. Powered with the voltage of 1.8 V - 3.6 V, pins are...MB85RS64V - 64Kb / 8KB FRAM non-volatile SPI memory - Adafruit 1897
Module with non-volatile FRAM memory for data storage which is characterized by low power consumption and very high durability. The system capacity is 64 KB (8 KB), it...Products from the same category
Coolseer WiFi Siren Alarm - wireless WiFi siren alarm - 100dB - COL-SR01W
Wireless siren powered by two CR123A batteries or a microUSB cable. It communicates via WiFi network. The siren can be connected to other sensors, e.g. flooding or...Coolseet - WiFi temperature and humidity sensor with siren - COL-SR02W
Temperature and humidity sensor closed in a round housing with a built-in siren . The device communicates with the WiFi network, so you can have a constant view of room...Neo NAS-AB03W - WiFi alarm siren with temperature and humidity sensor
WiFi alarm siren for use indoors. It has a sound power of 100 dB, as well as a built-in temperature and humidity sensor Very easy to install, works wirelessly. Works with...Alarm speaker S1 - 12V 100dB 6 tones
Simple siren with 12 V supply voltage, current consumption of 250 mA. Generates 6 successive sound frequencies. Connect the device using two wire with removed insulation....Alarm speaker S4 - 6-14V 112dB
Big siren, power voltage range from 6 V to 14 V, with current consumption up to 2,5 A. Generates 2 tons with effects depending on the connected cable. Unit dimensions: 240 x...Alarm speaker S2 - 6-14V 105dB 6 tones
Simple siren voltage supply range from 6 V to 14 V, with current consumption of 250 mA. Generates 6 successive sound frequencies. Connect the device using two wire with removed...Alarm speaker S3 - 6-14V 112dB 6 tones
Siren with power voltage range from 6 V to 14 V, current consumption up to 1000 mA. Generates 6 successive sound frequencies. Connect the device using two wire with removed...