Wyświetlacz LCD 2x16 znaków niebieski
Wyświetlacz LCD 2x16 znaków niebieski
Wyświetlacz LCD 2x16 znaków niebieski - zdjęcie 1
Wyświetlacz LCD 2x16 znaków niebieski - zdjęcie 2

LCD display 2x16 black and white characters

Index: LCD-01131

Symbol: JHD162A-FN-V. Driver that is compatible with HD44780. Black negative. Backlight: white LEDs. Character color: white.

€6.95
€5.65 tax excl.
Czas oczekiwania: ok. 10-30 dni
Waiting for delivery
30-day returns
Manufacturer: OEM

Product description: LCD display 2x16 black and white characters

The display is often used because of its low price and high availability. One of the main advantages is the ease of operation.

Display specification

  • LCD display 2x16 characters,
  • Driver: SPLC780D compatible with HD44780
  • Black negative
  • Backlight: white LEDs, white characters
  • Module size : 80 x 36 x 12 mm
  • Character size: 2.95 x 4.35 mm
  • Operating temperature range : -20 to +50 degrees C

 

A detailed description and a library for microcontrollers AVR is available on the following page: link.

 

Dimensions and outputs of display

 

 

 No. Name Description
1 VSS Weight
2 VDD +5V
3 V0 Contrast
4 RS

Selection of display instruction register

(low) or data register (high)

5 R/W Read (low) / Write (status high)
6 E Unlock display
7 DB0

 

 

 

Data bus.

8 DB1
9 DB2
10 DB3
11 DB4
12 DB5
13 DB6
14 DB7
15 LEDA Backlight +5V
16 LEDK Mass illumination

 

 

Display management

The display can be controlled in the following modes:

  • 8-bit without busy flag read for transmission of the desired eight data bus lines and two control lines (RS, E - RW is connected to ground).
  • 8-bit with busy flag read for transmission of the desired eight data bus lines and three control lines (RS, E, RW).
  • 4-bit with busy flag read for transmission of the desired four lines of data bus and three control lines(RS, E, RW).
  • 4-bit without busy flag for transmission of the desired four lines of data bus and two control lines (RS, E - RW is connected to ground)).

 

The most frequently selected method of communication is the mode 4-bit without busy flag read. Sending a half-byte allows you to save valuable I/O microcontroller - only four data lines are beign used (8-bit captured eight of them). No busy flag read introduces the need to use software delays, but allows you to save even a single line - R/W. Pins can be connected on a permanent basis to the ground, because the data will be transported to the display in one direction only.

 

Screen - type alphanumeric
Screen - diagonal 2.6 ''
Screen - interface GPIO
Screen - touch no
Screen - resolution 2x16 znaków

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

Breadboard - 690 holes

Contact plate ideal for testing systems before design PCB.
Index: PLY-00888
Index: PLY-00888
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.84 Price €1.84
  • Free shipping
Index: DIS-00957
In stock, shipping 24 hours!
(Check quantity)
Regular price €19.53 Price €19.53
  • Free shipping

ATmega8 mini module - microBOARD-M8

Module microBOARD-M8-miniature set of run with the host microcontroller ATmega8A.
Index: MOD-00970
Index: MOD-00970
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.95 Price €6.95
  • Free shipping

Arduino Leonardo - module A000052 - low profile (without connectors)

Popular module with microcontroller AVR Atmega32U4. It has 32 KB of Flash memory, 2.5 KB RAM, 20 digital inputs/outputs, 7 of which can be used as PWM channels and 12 as analog...
Index: ARD-01061
Index: ARD-01061
In stock, shipping 24 hours!
(Check quantity)
Regular price €19.07 Price €19.07
  • Free shipping

Customers who bought this product also bought:

Sponge for cleaning soldering tips - square - 5pcs.

Soldering iron square-shaped main blade cleaning sponge with a side of about 60 mm.
Index: LUT-00639
Index: LUT-00639
Available, 24h shipping!
(Check quantity)
Regular price €2.07 Price €2.07
  • Free shipping

Stand for a soldering iron - Vorel 79386

Universal stand for soldering irons, suitable for most of resistance soldering irons. The set also includes a sponge.
Index: NSZ-00673
Index: NSZ-00673
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.98 Price €1.98
  • Free shipping

Breadboard - 840 holes

Contact plate to check the layout before PCB design. 840 has a hole (pitch 2.54 mm), which can be fastened to the chip and module.
Index: PLY-00890
Index: PLY-00890
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.30 Price €2.30
  • Free shipping

Stand for DIP28 narrow - 5pcs

Stand for chip DIP 28. Price for 5 pieces.  
Index: UCC-00090
Index: UCC-00090
Czas oczekiwania: ok. 10-30 dni
Regular price €0.28 Price €0.28
  • Free shipping
Index: PAS-00133
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.14 Price €1.14
  • Free shipping

Temperature sensor DS18B20 - digital 1-wire THT

Digital temperature sensor DS18B20 with 1-wire interface. Works in range from -55 °C to 125 °C. It is supplied with the voltage from 3.0 V to 5.5 V.
Index: SES-00165
Index: SES-00165
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.84 Price €1.84
  • Free shipping

Etcher for circuit boards B327 - 100g

Printed circuit board etching agent. Dissolves very quickly and does not crystallise from the solution. It etch evenly, ensuring sharp contours and minimising irritation.
Index: CHE-01057
Index: CHE-01057
Available, 24h shipping!
(Check quantity)
Regular price €1.02 Price €1.02
  • Free shipping

Laminate FR4 one-sided size M

FR4 laminate on one side with a thickness of about 1.5 mm. Copper layer 35 um. The sheet dimensions are 90 x 200 mm, with a tolerance of 20 mm.
Index: LUT-00932
Index: LUT-00932
Waiting time: about 10-30 days
Regular price €1.05 Price €1.05
  • Free shipping

IDC 10 pin female-female - 30cm

Universal female cable with the length of 30 cm, ended with the 10-pin IDC slots with the pitch of 2.54 mm (standard goldpin) which can be used to create different connections.
Index: KAB-01051
Index: KAB-01051
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.63 Price €0.63
  • Free shipping

Mini DC Motor MT78 3-6 V

Small metal motor powered from 3 V to 6 V. Idle current 200 mA. Dimensions: 38 x 20 mm. Speed 7400 rpm .
Index: MOT-00951
Index: MOT-00951
Available, 24h shipping!
(Check quantity)
Regular price €1.16 Price €1.16
  • Free shipping

Male Headers 1x40 raster 2,54mm straight

Goldpin male 1x40 strap, pitch is 2.54 mm.
Index: KAB-00192
Index: KAB-00192
Unavailable
Regular price €0.16 Price €0.16
  • Free shipping

L293D - two-channel 36V / 0,6A motor driver - 5pcs

Two-channel motor controller. Supply voltage up to 36 V . Average current per channel 600 mA (momentary up to 1.2 A). Enclosure: DIP 16 (scrolling). Set contains 5 pieces of...
Index: UCC-00176
Index: UCC-00176
Available, 24h shipping!
(Check quantity)
Regular price €2.07 Price €2.07
  • Free shipping

Products from the same category

Bicolor LCD 1,3inch 144x168 with embeded memory, black-white 144x168px SPI - Waveshare 15883

Two-color graphical display with a diagonal of 1.3" and a resolution of 144 x 168 px. It communicates via the SPI bus. Input voltage of 3.3 V / 5 V
Index: WSR-14075
Index: WSR-14075
Waiting time approx. 10-30 days
Regular price €21.63 Price €21.63
  • Free shipping

Graphic display 122x32 green - LGMFD12232G6YLY

Matrix card 122 x 32, positive, white backlit green LEDs, FSTN type, with a UV filter. Screen size 64 x 17,9 mm. Manufacturer: Fordata.
Index: LCD-01484
Index: LCD-01484
Czas oczekiwania ok. 10-30 dni
Regular price €13.93 Price €13.93
  • Free shipping

LCD display 2x16 characters RGB positive + connectors - Adafruit 398

LCD 2x16 character display, based on HD44780 driver with lights in any color from the RGB palette. The characters are in black, so called positive. The set also includes the...
Index: ADA-02621
Index: ADA-02621
Na zamówienie. Czas oczekiwania ok. 4-8 tyg.
Regular price €16.27 Price €16.27
  • Free shipping

RGB negative 2x16 LCD + keypad Kit for Raspberry Pi - Adafruit 1110

Kit for self-assembly enabling a simple connection of a display 2x16 RGB to a minicomputer Raspberry Pi. It communicates through the I2C bus and uses only two pins of the GPIO...
Index: ADA-02466
Index: ADA-02466
Na zamówienie. Czas oczekiwania ok. 4-8 tyg.
Regular price €32.33 Price €32.33
  • Free shipping

RGB positive 2x16 LCD + keypad Kit for Raspberry Pi - Adafruit 1109

Kit for self-assembly enabling a simple connection of a display 2x16 RGB to a minicomputer Raspberry Pi. It communicates through the I2C bus and uses only two pins of the GPIO...
Index: ADA-02464
Index: ADA-02464
Na zamówienie. Czas oczekiwania ok. 4-8 tyg.
Regular price €33.19 Price €33.19
  • Free shipping

LCD display 8x2 - Black Bezel Parallel Interface - Pololu 356

Character color: black. Backlight: green. Based on the popular HD44780 controller. Voltage supply 5 V.
Index: PLL-06369
Index: PLL-06369
Czas oczekiwania ok. 10-21 dni
Regular price €8.35 Price €8.35
  • Free shipping

LED FeatherWing - 4x 14-segment display - Adafruit 3089

Module from Feather family features four 14-segment displays that can display all numbers and the whole alphabet. Very bright characters can be read even from 7 meters.
Index: ADA-10618
Index: ADA-10618
In stock, shipping 24 hours!
(Check quantity)
Regular price €8.02 Price €8.02
  • Free shipping

Blue negative 2x16 LCD + keypad Kit for Raspberry Pi - Adafruit 1115

Kit for self-assembly enabling a simple connection of a display 2x16 with blue backlight to a minicomputer Raspberry Pi. It communicates through the I2C bus and uses only two...
Index: ADA-02467
Index: ADA-02467
Waiting time: approx. 10-30 days
Regular price €26.74 Price €26.74
  • Free shipping

Smart controller Reprap 3D Ramps 1.4 LCD 2004

Control panel with LCD display and SD card slot for 3D RepRap printers. Also included are cables and adapter for connection to the Ramps 1.4 controller.
Index: MOD-02661
Index: MOD-02661
Waiting time: about 10-30 days
Regular price €19.77 Price €19.77
  • Free shipping

LCD display 4x20 characters blue + I2C converter for Odroid H2

The Odroid H2 minicomputer's 4 x 20 LCD display uses an I2C interface for communication, so it only uses 4 pins to connect.
Index: ODR-15155
Index: ODR-15155
Unavailable
Regular price €10.12 Price €10.12
  • Free shipping

LCD display 4x20 characters blue + I2C LCM1602 converter

Popular 2 x 40 backlit blue display with soldered-in I2C bus converter. Thanks to this circuit, two data lines and a 5 V power supply and ground are sufficient to connect the...
Index: LCD-02640
Index: LCD-02640
Waiting time: about 10-30 days
Regular price €9.28 Price €9.28
  • Free shipping

DFRobot Gravity - 2x16 I2C LCD display - gray

LCD display 2x16 characters with backlight in gray. Communicates with two-wire I2C bus. The kit includes a cable adapted to Gravity DFRobot IO Expansion Shield....
Index: DFR-12364
Index: DFR-12364
Waiting time: approx. 10-30 days
Regular price €9.74 Price €9.74
  • Free shipping