Sharp GP2Y0A60SZLF - analog distance sensor 10-150cm 5V - Pololu 2474

Index: PLL-02707 EAN: 5904422373474

Analog distance sensor (rangefinder) Sharp GP2Y0A41SK0F with PCB Pololu stand. It detects objects in the range from 10 to 150 cm.

Sharp GP2Y0A60SZLF - analog distance sensor 10-150cm 5V - Pololu 2474
€41.50
€33.74 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Pololu
Compatibility: Arduino

Product description: Sharp GP2Y0A60SZLF - analog distance sensor of 10-150 cm 5V

The sensor can detect objects at a distance of from 10 cm to 150 cm. The output is the voltage analog signal whose value depends on the distance between the detected object and the sensor. The closer the object is, the voltage at the output is higher. The data refresh rate is 60 Hz.

analogowy czujnik odległości Sharp - Pololu

The sensor is located on the base of PCB which has goldpin connectors, 2.54 mm pitch, compatible with the popular breadboards. The strap must be self-soldered by choosing between direct and angular strap. The mounting of the system is allowed by the hole for the screw with a diameter of 3.15 mm.

 Sharp - widok z boku

 

Connection

Sensors of this type are readily used by designers of mobile robots, e.g in design of fighting robots, to detect the enemy, or ride platforms, where it is used for obstacle detection. In our offer are two versions of this sensor:

 

Sharp - wyprowadzenia

 

Pin Description
EN Pin ENABLE, enabled by default. To switch the system to low power consumption mode by disabling the IR transmitter, you must specify the low status.
OUT The analog output from 0.6 V (150 cm) to 3.6 V (150 cm). You need to connect to analog-to-digital converter of the microcontroller, e.g. an Arduino.
VCC Supply voltage from 2.7 V to 5.5 V.
GND The groundof the module.

 

Specification of the analog distance sensor - Sharp GP2Y0A60SZLF

  • Measuring range: from 10 cm to 150 cm
  • Operating voltage: 2.7 V to 5.5 V
  • The average current consumption 33 mA
  • Output: voltage-analog signal
  • The difference of the output voltage: from 0.6 V to 3.6 V:
    • 0.6 V for 150 cm
    • 3.6 V for 10 cm
  • Refresh rate: 60 Hz
  • Case: 33,0 x 10.5 x 10.2 mm
  • Weight: 3.5 g

 

Voltage to 2.7 V
Voltage from 5.5 V
Interface analog
Sensor - distance to 150 cm
Sensor - distance from 10 cm
Package width 8 cm
Package height 9.5 cm
Package depth 1 cm
Package weight 0.004 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: