• EOL

ArduCam OV5640D 5MPx AutoFocus camera module for Arduino

Index: ACM-13862 EAN: 5904422321574

Camera module with matrix OV5640D with a resolution of 5 MPx and the size of 1/4" with the output of format JPEG, RAW, RGB and YUV. The camera has Autofocus. Transfer rate with full resolution of 2592 x 1944 px, is 15 fps. It is equipped with a lens of 1/4". The device operates with a voltage of 3.3 V, it communicates through a parallel interface.

ArduCam OV5640D 5MPx AutoFocus camera module for Arduino
€26.50
€21.54 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: ArduCam
Compatibility: Arduino

Attention!

The product has been discontinued. Check other products in category.

Product description of ArduCam OV5640D

Camera module with matrixOV5640Dwith a resolution of5 MPxand the size of1/4"with the output of format JPEG, RAW, RGB and YUV. The camera has Autofocus. Transfer rate with full resolution of 2592 x 1944 px,is15 fps. It is equipped with a lensof 1/4". The device operates with a voltage of 3.3 V, it communicates through a parallel interface.

ArduCam OV5640D

The product is compatible with Arduino

Auser manualandlibrary for Arduino are available on GitHub.

A block diagram of the camera ArduCam OV5640D

The device consists of a sensor and an electronic part with a data buffer and bus controller.

ArduCam-Mini OV5640

A block diagram of the camera module ArduCAM.

OV5640D 5mpx Autofocus module specification 

  • Supply voltage: 3.3 V
  • Matrix OV5640D, 5 MPx, 1/4" (documentation)
  • Resolution: max2592 px x 1944(5 MPx)
  • Pixel size: 1.4 x 1.4 µm
  • Range of view: 3673,6 x 2738,4 µm
  • Clock input speed: from 6 to 27 MHz
  • Angle of view: 24 °
  • Speed (fps):
    • QSXGA (2592 x 1944): 15 fps
    • 1080p: 30 fps
    • 1280x960: 45 fps
    • 720p: 60 fps
    • VGA (640 x 480): 90 fps
    • QVGA (320 x 240): 120 fps
  • Output formats:
    • YUV(422/420) / YCbCr422,
    • RGB565/555/444,
    • CCIR656,
    • compressed 8-bit data
    • 8 / 10-bit RAW RGB Data
  • Lens1/4"

Pins of camera OV5640D

The device has soldered 22 pin connector, pitch of 2.54 mm.

Pin Name Description
1 VCC Supply voltage is 3.3 V.
2 GND The ground of the system.
3 SCL Clock line of the interface Two-Wire.
4 SDATA Data line of the interface Two-Wire.
5 VSYNC Vertical synchronization.
6 HREF Horizontal synchronization.
7 PCLK The clock output of the matrix's sensor.
8 XCLK The input of the system clock.
9 DOUT9 The video data output - bit 9 (MSB).
10 DOUT8 The video data output - bit 8.
11 DOUT7 The video data output - bit 7.
12 DOUT6 The video data output - bit 6.
13 DOUT5 The video data output - bit 5.
14 DOUT4 The video data output - bit 4.
15 DOUT3 The video data output - bit 3.
16 DOUT2 The video data output - bit 2 (LSB).
17 DOUT1 The video data output - bit 1 (10-bit mode).
18 DOUT0 The video data output - bit 0 (mode of10-bit).

19 RESET The reset signal of sensor, activated with the low state.
20 PWDN Disabling the system by activating the high state.
21 AFVDD The power for the VCM from 2.8 V to 3.3 V.
22 STB The stroboscopic output.

Camera - matrix OV5640D
Camera - format 1/4 ''
Camera - type module
Package width 6 cm
Package height 1 cm
Package depth 5 cm
Package weight 0.012 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: