• EOL

Seeeduino Cloud ATmega32u4 + Atheros AR9331 - compatible with Arduino

Index: SEE-12316 EAN: 5904422319014

Module from Seeedstudio, it combines the microcontroller ATMega 32u4 and the Dragino HE system using Atheros AR9331 controller so the wireless programming is possible and control of the device via wi-fi network. It has 32 KB of Flash memory, 2.5 KB RAM, 20 digital inputs/outputs, 7 of which can be used as PWM channels and 12 as analog inputs and interfaces, including USB.

Seeeduino Cloud ATmega32u4 + Atheros AR9331 - compatible with Arduino
€26.90
€21.87 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Seeedstudio

Attention!

The product has been discontinued. Check other products in category.

Description

Module from Seeedstudio, it combines the microcontroller ATMega 32u4 and the Dragino HE system using Atheros AR9331 controller so the wireless programming is possible and control of the device via wi-fi network. It has20 digital input/outputs, 7 of which can be used as PWM outputs (e.g. for motor control) and 12 as analog inputs. The system works with the clock signal with the frequency of 16 MHz, it has 32kB of Flash and 2.5 KB of SRAM.

Thanks to compatibility withArduino Yun, it is possible to usethe Bridge library available form the level of Arduino IDE so you can simply, wirelessly, via wi-fi network, program, configure, or modify and read the status of pins.After connecting the power supply (5 V viapower supplywith micro USB connector), the module is visible on PC as a wi-fi network with the name of SeeeduinoCloud-AXXXX.

Key features

  • MicrocontrollerATMega 32u4
  • ModuleAtheros AR9331
  • Compatible with Arduino Yun
  • 2connectors for connection of sensors from Grove series
  • Installed OpenWRT system
  • WiFi 2.4 GHz, 802.11 b/g/n
  • Ethernet
  • USB 2.0
  • Work with a voltage of 3.3 V
  • The distribution of connectors is compatible with the Arduino so the shields will work correctly

Seeeduino Cloud

The manufacturer provides a detaileduser's manualshowing the step by step installation and configuration of the device.

Specification

  • Supply voltage: 3.3 V
  • AVR microcontroller:ATmega32u4
    • Maximum clock frequency: 16 MHz
    • SRAM: 2.5 KB
    • Flash memory: 32 KB (4 KB is reserved for bootloader)
    • EEPROM: 1 KB
    • I/O Ports: 20
    • PWM outputs: 7
    • Number of analog inputs: 12 (channels of A/C converter with 10-bit resolution)
    • Serial interfaces: UART, SPI, I2C
    • External interrupts
  • Linux processor:AtherosAR9331
    • Architecture:MIPS 400 MHz
    • Supply voltage: 3.3 V
    • Ethernet IEEE 802.3 10/100Mbit/s
    • Wi-fi IEEE 802.11 b/g/n
    • RAM: 64 MB DDR2
    • Flash memory: 16 MB
  • USB-2.0 connector
  • RJ45 connector

 

Voltage to 5.0 V
Voltage from 5.0 V
Voltage output from 3.3 V
Output voltage to 5.0 V
Nominal output voltage 5.0 V
UC - Microcontroller Atmega32U4
UC - Core 8-bit AVR
UC - EEPROM 1 kB
UC - Flash 32 kB
UC - RAM 2,5 kB
UC - core 1. Single Core
UC - Digital pins 20
UC - analog in 12
UC - freq 16 MHz
UC - Ethernet yes
UC - A/C 10-bit
UC - PWM 7
UC - WiFi yes
UC - USB microUSB
UC - I2C yes
UC - UART yes
UC - SPI interface yes
Package width 0 cm
Package weight 0.01 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: