Arduino WiFi MD 1010 with connectors
Arduino WiFi MD 1010 with connectors
Arduino WiFi MD 1010 with connectors
Arduino WiFi MD 1010 with connectors
Arduino WiFi MD 1010 with connectors - zdjęcie 1
Arduino WiFi MD 1010 with connectors - zdjęcie 2
Arduino WiFi MD 1010 with connectors - zdjęcie 3
Arduino WiFi MD 1010 with connectors - zdjęcie 4

Arduino MKR1010 module ABX00023 - Wi-Fi ATSAMW25 + ESP32 - with connectors

Index: ARD-12945 EAN: 7630049200258
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com

The module based on the ATSAMW25 Atmel SoC system with wi-fi ESP32 U-Blox designed for IoT projects. Equipped With Cortex-M0. Has 256 KB Flash memory, 32 KB SRAM, 8 digital inputs/outputs, 12 channels PWM and 7 analog inputs and one output, and popular communication interfaces. Works with a voltage of 3.3 V.

€35.10
€28.54 tax excl.

In stock, shipping 24 hours!
(Check quantity)
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: Arduino

Description

The module is based on  ATSAMW25 Atmel SoC system with wi-fi ESP32 U-Blox, designed for IoT projects. Equipped with a core Cortex M0. Has 8 digital inputs/outputs, 12 channels PWM (e.g. for motor control) and 7 analog inputs with a resolution of 8 / 10 / 12 bit. The module also has 10-bit analog DAC output. The system works with the clock signal with the frequency of 48 MHz. I/O operate at voltage of 3.3 V. The module can be powered with battery Li-po 1S 3,7 V minimum 700 mAh or charge in case of an external power module.

MKR WiFi 1010

ATSAMW25 consists of three main blocks:

  • the core SAMD21 Cortex-M0+ low power 32bit ARM MCU
  • system wi-fi U-Blox Nina W10 low power 2.4 GHz IEEE 802.11 b / g / n
  • ECC508 CryptoAuthentication

Key features

Below are a few features that distinguish modules Arduino from the other programmable tiles.

 

Name Description

Installed

loader

Thanks to bootloader, only the appropriate microusb cable and the software from the manufacturer's website are necessary to program the device.

Small

size

This version is characterized by small size: 61.5 x 25 mm. Has soldered male connectors on the bottom and female connectors on the top side of the tile.

Connection

Wi-fi

Arduino MKR1010 can in a simple way, wirelessly, via wi-fi network, programme, configure, or modify and read the status of I/O.

Digital I/O

8 digital inputs/outputs allows, in particular, to control the LEDs, relays and reading the buttons' states.

Efficiency of

current

The maximum current efficiency for one output is 7 mA.

Outputs

PWM

12 outputs PWM allow, for example, to control the motors and brightness of the LEDs.

Analog inputs

7 inputs of built-in analog-digital converter with a resolution of 12-bits, support, in particular, sensors with analog output.

Serial communication

The device supports popular communication interfaces, including UART, I2C and SPI.

Built-in memory

Atmel ATSAMW25 system has a clock signal at a frequency of 48 MHz, has 256 KB Flash and 32 KB RAM SRAM.

Supply 5 V

microUSB / battery 3.7 V

To power the Arduino, you can use a power source with a voltage of 5 V with a microUSB connector and the battery Li-Pol 3.7 V 1S with the volume of at least 700 mAh.

Charging the battery pack Li-Pol

The module has the function of power battery with voltage up to 4.2 V with an intensity of 350 mAh.

Built-in led

The connected led on pin 6 allows debugging simple programs.

 

First run

To help you get started with the module, the manufacturer prepared a tutorial that will help you with the installation and first run of the Arduino environment.

Specification

  • Voltage from 3.7 V to 5 V
  • Current consumption: 7 mA
  • Atmel ATSAMW25 system
    • core: Cortex-M0
    • Maximum clock frequency: 48 MHz
    • SRAM: 32 KB
    • Flash memory: 256 KB
    • I/O Ports: 8
    • PWM outputs: 12
    • Number of analog inputs: 7 (channels of analog-digital converter with 12-bit resolution)
    • Serial interfaces: UART, SPI, I2C
    • External interruptions
  • Wi-fi U-Blox Nina w10 low power 2.4 GHz IEEE 802.11 b/g/n
  • MicroUSB slot
  • JST slot
  • Tile sizes: 61,5 x 25 mm
  • Weight: 32 g

Attention!

Tile series Arduino NKR has minor visual defects which the manufacturer i.e. the company Arduino, explains by improving parameters of the new machine. We guarantee that all tiles marked with symbol Arduino are genuine and come from the same source. As you can see by checking the list of authorized distributors.

Voltage to 3.7 V
Voltage from 5.0 V
Voltage output from 3.3 V
Output voltage to 3.3 V
Nominal output voltage 3.3 V
UC - Microcontroller ATSAMW25
UC - Core 32-bit ARM Cortex M0
UC - Flash 256 kB
UC - RAM 32 kB
UC - core 1. Single Core
UC - Digital pins 8
UC - analog in 7
UC - freq 48 MHz
UC - A/C 12-bit
UC - PWM 12
UC - WiFi yes
UC - USB microUSB
UC - I2C yes
UC - UART yes
UC - SPI interface yes

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

Customers who bought this product also bought:

Memory card Goodram M1AA microSD 32GB 100MB/s UHS-I class 10 with adapter

Popular format micro SD/SDHC, which is used in smartphones, tablets, cameras. Product of class 10 with UHS-I interface from company Goodram. S peed of read: up to...
Index: KAP-02361
Index: KAP-02361
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.11 Price €5.11

SNES - retro game controller - violet buttons

Wired controller for PC and minicomputer Raspberry Pi, simulating the classic controller from Super Nintendo console. It has 8 functional keys and 4 directional keys. It...
Index: DNG-12097
Index: DNG-12097
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.13 Price €3.13

SNES - retro game controller - colorful buttons

Wired controller for PC and minicomputer Raspberry Pi, simulating the classic controller from Super Nintendo console. It has 8 functional keys and 4 directional keys. It...
Index: DNG-12458
Index: DNG-12458
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.13 Price €3.13

Mini PIR HC-SR505 motion sensor

PIR sensor can detect movement. It is used to detect objects in the premises in alarm and lighting systems. The sensor is powered with the voltage from 4.5 V to 15 V. The...
Index: MOD-05862
Index: MOD-05862
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.67 Price €1.67

Set of heat sinks for Raspberry Pi with thermoconductive tape + engraving - 3 pieces

The set includes two colored heatsinks in sizes: green 14 x 14 x 8 mm, blue 9 x 9 x 12 mm and one copper engraved with the logo of the Raspberry Pi in size 12 x 12 mm. You can...
Index: DNG-12709
Index: DNG-12709
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.47 Price €1.47

AVR 2 programmer compatible with USBasp ISP

Programmer AVR USBasp 2 is fully compatible with the USBasp programmer. It can be used to program microcontrollers from the AVR family via the USB port. Version 2 has two...
Index: MOD-01317
Index: MOD-01317
In stock, shipping 24 hours!
(Check quantity)
Regular price €11.90 Price €11.90

Programmer AVR ProgUSB MKII ECO v2.1 + IDC tape

Programmer AVR MKII is fully compatible with the system AVRISP-MKII. It can be used to program all microcontrollers from the AVR family with ISP interface. The module is...
Index: MOD-07246
Index: MOD-07246
Czas oczekiwania: ok. 10-30 dni
Regular price €13.48 Price €13.48

WG1300 WiDo wi-fi module - compatible with Arduino

The DFRobot module is fully compatible with Arduino, it has, known from Leonardo, the ATmega32u4 microcontroller. The colored connectors will help you identify the leads. Board...
Index: DFR-03177
Index: DFR-03177
In stock, shipping 24 hours!
(Check quantity)
Regular price €35.33 Price €35.33

Set of 350 wires for breadboards

Set of 350 wires of different length to connect the fields on the breadboards (test).
Index: KAB-00741
Index: KAB-00741
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.38 Price €9.38

Logic system CD4081BE - 4xAND - 2pcs

Logic system 4 x gate And with a working voltage from 3 V to 18 V, in the DIP 14 case. Items are sold in sets of 2 pieces.
Index: UCC-07282
Index: UCC-07282
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.78 Price €0.78

Logic system CD4069UBE - 6x inverter - 2pcs

Logic system 6 x inverter with working voltage from 3 V to 18 V, in the DIP 14 case. Items are sold in sets of 2 pieces.
Index: UCC-07284
Index: UCC-07284
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.73 Price €0.73

Logic system CD4071BE - 4xOR - 2pcs

Logic system 4 x gate OR with working voltage from 3 V to 18 V, in the DIP 14 case.  Items are sold in sets of 2 pieces.
Index: UCC-07285
Index: UCC-07285
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.66 Price €0.66

Products from the same category

Arduino MKR WAN 1310 - LoRaWAN SAMD21 - ABX00029

Module with 32-bit Atmel ARM Cortex-M0+ microcontroller , 256 kB Flash memory and 32 kB SRAM. Enables connection to the LoRa network . MKR WAN 1310 has a new battery...
Index: ARD-15839
Index: ARD-15839
Available, 24h shipping!
(Check quantity)
Regular price €43.88 Price €43.88

Arduino MKR Zero module ABX00012 - SAMD21-with connectors

Module with chip Atmel SAMD21 Cortex-M0+, allowing you to study modules for 32-bit. Has 256 KB Flash memory, 32 KB SRAM, 22 digital inputs/outputs, 12 channels PWM) and 7...
Index: ARD-10051
Index: ARD-10051
In stock, shipping 24 hours!
(Check quantity)
Regular price €26.53 Price €26.53

MKR IoT Carrier Board for Arduino MKR - Arduino ABX00047

An extension for Arduino® modules from MKR series giving endless possibilities in IoT projects without soldering. The board features an OLED display , touch buttons,...
Index: ARD-19128
Index: ARD-19128
Available
(Check quantity)
Regular price €60.53 Price €60.53

Arduino MKR WAN 1300 LoRaWAN ABX00017 module - SAMD21 - with headers

The module is equipped with a 32-bit processor Atmel ARM Cortex-M0+, 256KB Flash memory and 32KB SRAM. It combines the capabilities of tile MKR Zero and connectivity LoRa. The...
Index: ARD-13292
Index: ARD-13292
In stock, shipping 24 hours!
(Check quantity)
Regular price €43.88 Price €43.88

Arduino MKR1000 module ABX00011 - Wi-Fi ATSAMW25 - with connectors

The module based on ATSAMW25 Atmel SoC system with wi-fi, designed for IoT projects. Equipped with Cortex-M0. Has 256 KB Flash memory, 32 KB SRAM, 8 digital inputs/outputs, 12...
Index: ARD-10050
Index: ARD-10050
In stock, shipping 24 hours!
(Check quantity)
Regular price €41.38 Price €41.38

Arduino MCR Vidor4000 ABX00022 - module with FPGA Cyclone 10

The module based on the system Atmel SAMD21, designed for IoT projects. Equipped with a Cortex-M0+. It has 2 MB of Flash memory, 8 MB SRAM. In addition, the system is...
Index: ARD-12946
Index: ARD-12946
In stock, shipping 24 hours!
(Check quantity)
Regular price €74.03 Price €74.03

OPLA IoT Starter Kit - programming kit - Arduino AKX00026

OPLÀ is the first IoT programming platform that allows you to create your own IoT devices with full control over their algorithms and your own data. Connected devices can be...
Index: ARD-18219
Index: ARD-18219
Available, 24h shipping!
(Check quantity)
Regular price €134.78 Price €134.78

Arduino MKR1000 module ABX00004 - Wi-Fi ATSAMW25 - without connectors

The module based on ATSAMW25 Atmel SoC system with wi-fi, designed for IoT projects. Equipped With Cortex-M0. Has 256 KB Flash memory, 32 KB SRAM, 8 digital inputs/outputs, 12...
Index: ARD-12454
Index: ARD-12454
In stock, shipping 24 hours!
(Check quantity)
Regular price €39.38 Price €39.38

Arduino GSM MD 1400-B - module ABX00018 with connectors

The module based on the layout of the Atmel SAMD21 SoC with GSM module SARAU201 designed for IoT projects. Equipped With A Cortex-M0+. Has 256 KB Flash memory, 32 KB SRAM, 8...
Index: ARD-12314
Index: ARD-12314
Czas oczekiwania ok. 7-14 dni
Regular price €73.58 Price €73.58

Arduino Edge Control - outdoor environments Bluetooth controller - Arduino AKX00034

Controller equipped with Bluetooth chip for remote monitoring and control, optimized for outdoor environments . The board is equipped with a socket for plugging in any...
Index: ARD-19762
Index: ARD-19762
On request. Waiting time 4-6 weeks.
Regular price €193.28 Price €193.28

Arduino MKR NB 1500 - module ABX00019

The module based on Atmel ATSAMD21 SoC system and U-blox SARA-R410M, allows you to stay connected in the standard Narrowband-IoT and LTE Cat M1 . Tile has a Cortex-M0+, 256...
Index: ARD-13282
Index: ARD-13282
In stock, shipping 24 hours!
(Check quantity)
Regular price €79.88 Price €79.88