Arduino Uno Rev3 - module A000066

Index: ARD-01060 EAN: 7630049200050

The original module from the Arduino® Uno with the AVR microcontroller ATmega328 in an interchangeable housing. It has 32 KB Flash memory, 2 KB RAM, 14 digital I/o of which 6 can be used as PWM channels, 6 analog inputs and popular communication interfaces.

Arduino Uno Rev3 - module A000066
€26.90
€21.87 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Arduino

Description

Arduino Uno is the main and, at the same time, the most popular edition of the entire series. The Board contains an ATmega328 microcontroller, equipped with 14 digital I/o of which 6 can be used as PWM outputs (e.g. for motor control), and 6 analog inputs. The system works with the signal ticking with the frequency of 16 MHz and has 32 KB Flash memory and 2 KB RAM SRAM.

 

The subject of the sale is the original product of Arduino Uno, Botland is the official distributor of this company.

Key features

Below are a few features that distinguish modules Arduino Uno compared to other programmable tiles.

 

Name Description

Installed

bootloader

Thanks to installed bootloader, to programme the device, the appropriate USB cable and software from manufacturer's website is enough .

Arduino

Shield

The distribution of connectors allows the installation of special plates, so-called Arduino Shield.

Digital 

outputs

14 digital inputs/outputs allows, in particular, control of LEDs, relays and reading the buttons' states.

Efficiency of

current

The maximum power load for a single output is 40 mA.

PWM

Outputs

6 PWM outputs allow e. g. motor control and brightness control of the LEDs.

Analog 

inputs

6 inputs of built-in analog-digital converter box with a resolution of 10-bit support, in particular, sensors with analog output.

Serial

Communication

The device supports popular network interfaces, including UART, I2C and SPI.
Special functions Some of the pins have special functions and their brief description is available in our guide.

Built-in

memory

Atmega328 system with a clock signal with a frequency of 16 MHz, has 32K Flash memory, 1 KB EEPROM and 2 KB of RAM SRAM.

Power 

DC connector

To power the Arduino, you can use any power source with a voltage from 7 V to 12 V with DC connector 5.5 x 2.1 mm.

Power

USB port

The tile can be powered from a computer via USB cable, bearing in mind that the maximum power load for the USB port is 500 mA. Arduino has a system that protects the socket from short-circuit and the flow of too large current.

ICSP

Connector

The module has ICSP outputs for connecting an external AVR programmer.

IOREF

Pin

The IOREF Pin provides direct access to the volatge with which I/O outputs work.

Built-in

led

The connected led on pine 13 allows debugging of simple programs.

Output

3.3 V

Built-in voltage regulator provides power to external devices with the voltage of 3.3 V with current consumption of 50 mA.

Microcontroller

in THT

Thanks to the use of THT case, in case of damaging the main microcontroller Atmega328P you can easily replace it.

 

First run

To help you get started with the module, we have prepared a tutorial that concerns the installation and first run of the Arduino environment.

 

Arduino uno rev3 - moduł, platforma, atmega328, płytka,

The distribution of elements on the Arduino Uno.

 

Specification

  • Supply voltage from 7 V to 12 V
  • Model: Arduino Uno
  • Microcontroller: ATmega328
    • Maximum clock frequency: 16 MHz
    • SRAM: 2 KB
    • Flash memory: 32 KB (5 KB is reserved for bootloader)
    • EEPROM: 1 KB
  • I/O Ports: 14
  • PWM outputs: 6
  • Number of analog inputs: 6 (channels of converter A/C with 10 bit resolution)
  • Serial interfaces: UART, SPI, I2C
  • External interruptions
  • The connected led on pin 13
  • USB A connector for programming
  • DC connector 5.5 x 2.1 mm for power
  • Transparent, self-adhesive stems in kit

 

Voltage to 7.0 V
Voltage from 12.0 V
Voltage output from 5.0 V
Output voltage to 5.0 V
Nominal output voltage 5.0 V
UC - Microcontroller ATmega328
UC - Core 8-bit AVR
UC - EEPROM 1 kB
UC - Flash 32 kB
UC - RAM 2 kB
UC - core 1. Single Core
UC - Digital pins 14
UC - analog in 6
UC - freq 16 MHz
UC - A/C 10-bit
UC - PWM 6
UC - USB USB B
UC - I2C yes
UC - UART yes
UC - SPI interface yes
Package width 6 cm
Package height 2.6 cm
Package depth 8.3 cm
Package weight 0.048 kg

Daniel

11/08/22

Question: Good day, does this product have a replaceable microcontroller as shown in the picture? Greetings Daniel
Answer: Yes, the module has a replaceable microcontroller.
Andrzej

01/31/22

Question: Hello, does the arduino uno kit include a board stand? USB cable can be A-B printer cable of course?
Answer: 

It comes with a plastic pad.

USB A-B cable, something like this:
https://botland.com.pl/477-przewody-usb-a-b
is also very often used in printers.

Fabian

12/20/21

Question: Good morning I have a question if the kit includes a cable to connect the board to the computer
Answer: Unfortunately, the cable is not included in the set, it can be purchased separately:
https://botland.com.pl/477-przewody-usb-a-b

Product reviews

Arduino Uno Rev3 - module A000066

4.9/5

Average grade

184

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: