- EOL
|
Attention! The sale of the product has been completed. Check otherdevices in this category. |
Product description: Arduino Mega ADK Android Rev3
Arduino Mega ADK, similarly to Mega version, has ATmega2560 microcontroller, equipped with 54 digital inputs/outputs, of which 15 can be used as PWM outputs (e.g. for controlling motors) and 16 analog inputs. The system is clocked with 16 MHz clock signal, has 256 kB of flash program memory and 8 kB of SRAM memory.
|
Additionally, thanks to the MAX3421 chip, the user has the possibility to use the USB interface, which allows for data exchange with smartphones (Android system),computers, cameras,game and motion controllers. |
The subject of sale is original Arduino product, Botland is theofficial distributor of this company.
Main features of Arduino Mega ADK
Below we present some features that distinguish Arduino modules from other programmable tiles.
| The name | Description |
|---|---|
|
Installed bootloader |
Thanks to the installed bootloader, the appropriateUSB cable andsoftware from the manufactureris sufficient to program the device. |
|
Arduino Shield |
The layout of connectors enables installation of dedicatedArduino Shieldcovers. |
|
Controller USB |
This version has a built-in USB controller that allows you to exchange data with smartphones (Android), computers, game and motion controllers. |
|
Queries digital |
56 digital inputs/outputs enable, among other things, to control LEDs, relays and read button statuses. |
|
Performance Current |
The maximum current capacity of a single output is 40 mA. |
|
Outputs PWM |
15 PWM outputs allow e.g. for motor control and diode brightness adjustment. |
|
Inputs analogue |
16 inputs of the built-in 10-bit analogue-to-digital converter support, among others, sensors with analogue output. |
|
Communication serial |
The device supports popular communication interfaces, among others: UART, I2C and SPI. |
| Special functions | Some pins have special functions, a brief description of which is available in our guide. |
|
Memory Embedded |
Atmega2560 chip is clocked with 16 MHz signal, has 256 kB of flash memory, 4 kB EEPROM and 8 kB SRAM. |
|
Power supply DC connector |
Any power supplyfrom 7V to 12V with 5.5 x 2.1mm DC connector can be used to power Arduino. |
|
Power supply USB port |
The board can be powered from a computer viaa USB cable witha maximum current capacity of 500 mA. Arduino has a system that protects the socket against short circuit and too high current flow. |
|
Connector . ICSP |
The module has ICSP outputs for connecting an externalAVR programmer. |
|
Pin IOREF |
The IOREF pin allows for direct access to the voltage with which the I/O outputs work. |
|
Built-in LED |
The connected LED on pin 13 allows debugging of simple programs. |
|
Output 3,3 V |
The built-in voltage regulator enables external devices to be supplied with 3.3 V with current consumption of up to 50 mA. |
|
First start-up In order to make it easier to start working with the module, we have prepared aguidethat covers the installation and first start-up of Arduino environment. |
The distribution of elements on Arduino Mega ADK board.
Specification of Arduino Mega ADK
- Power supply voltage:7 V to12 V
- Microcontroller: ATmega 2560
- Maximum clock frequency: 16 MHz
- SRAM: 8 kB
- Flash memory: 256 kB (8kB reserved for bootloader)
- EEPROM memory: 4 kB
- Pins I/O: 54
- PWM channels: 14
- Number of analog inputs: 16 (A/C converter channels)
- Serial interfaces: 4xUART, SPI, I2C
- External interruptions
- Connected LED to pin 13
- USB A socket for programming
- 5.5 x 2.1 mm DC connector for power supply
Useful links |
