• EOL

Genuino 101 Bluetooth - Intel Curie Quark + ARC

Index: ARD-05276

Arduino compatible module equipped with 32-bit Intel Curie x86 (Quark) 32 MHz microcontroller. It has 196 kB of flash memory, 24 kB SRAM, 14 digital inputs/outputs of which 4 are PWM channels, 6 analog inputs and popular communication interfaces. The outputs work with 3.3 V but tolerate 5 V. The board also includes a Bluetooth LE module and an accelerometer and gyroscope.

Genuino 101 Bluetooth - Intel Curie Quark + ARC
€42.90
€34.88 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Intel

Attention!
Production of the Genuino 101 tile has been completed. We encourage you to familiarize yourself with the offer ofother modules from Arduino series.

Description

Arduino compatible module equipped with 32-bitIntel Curie microcontrollerwith x86 Quark architecture and ARC 32-bit 32 MHz. It has 196 kB of flash memory, 24 kB SRAM, 14 digital inputs/outputs of which 4 can be used as PWM channels, 6 analog inputs and popular communication interfaces. The outputs work with a voltage of 3.3 V but tolerate 5 V. The board also has a Bluetooth LE module and an accelerometer and gyroscope.

Review of the board on theElektro Guidechannel.

See a sample project and review onForbot.pl.

Main features

Below are some of the features that distinguish Genuino modules from other programmable tiles.

The nameDescription

Installed

bootloader

Thanks to the installed bootloader, the appropriateUSB cable andsoftware from the manufactureris sufficient to program the device.

Arduino Shield

The layout of connectors enables installation of dedicatedArduino Shieldcovers.
Built-in modules On the plate are: 6-axis accelerometer and gyroscope and Low Energy Bluetooth.
Microcontroller The board has a 32-bitIntel Curiechipwith ARC x86 (Quark) architecture, clocked at 32 MHz. It has 196 kB of flash memory and 24 kB SRAM.

Quotes .

digital

14 digital inputs/outputs enable, among other things, to control LEDs, relays and read button statuses.Although the outputs work with 3.3 V, they also tolerate 5 V.

Capacity

Current

The maximum current capacity of a single output is 20 mA.

Outputs

PWM

4 PWM outputs allow e.g. for motor control and diode brightness adjustment.

Inputs

analogue

6 inputs of the built-in 10-bit analogue-to-digital converter support, among others, sensors with analogue output.

Communication

serial

The device supports popular communication interfaces, among others: UART, I2C (TWI) and SPI.
Special functions Some pins have special functions, a brief description of which is available on the manufacturer's website.

Memory

Embedded

The Intel Curie chip is clocked with a 32 MHz signal, has 196 kB of flash memory and 24 kB of SRAM.

Power supply

DC connector

Any power supplyfrom 7 V to 12 V with a 5.5 x 2.1 mm DC connector can be used to power Genuino.

Power supply

USB port

The board can be powered from a computer viaa USB cable witha maximum current capacity of 500 mA. Arduino has a system that protects the socket against short circuit and too high current flow.

Connector .

ICSP

The module has ICSP outputs to connect an externalAVR programmer.

Pin

IOREF

The IOREF pin allows for direct access to the voltage with which the I/O outputs work.

Built-in

LED

The connected LED on pin 13 allows debugging of simple programs.

Output

3,3 V

The built-in voltage regulator enables external devices to be supplied with 3.3 V with current consumption of up to 1500 mA.

Genuino 101 Intel - moduł

The layout of the elements on the Genuino 101 board.

Specification

  • Supply voltage: 7 V to 12 V
  • Microcontroller: Intel Curie x86 (Quark)
    • Maximum clock frequency: 32 MHz
    • SRAM: 26 kB
    • Flash memory: 196 kB
  • Ports I/O: 14
  • PWM outputs: 4
  • Number of analog inputs: 6 (A/C converter channels with 10 bits resolution)
  • Serial interfaces: UART, SPI, I2C
  • Connected LED on pin 13
  • USB A socket for programming
  • 5.5 x 2.1 mm DC connector for power supply

Starting set from Genoa 101

Our offer also includes a set of electroniccomponentsto facilitate the start of programming and interaction with the equipment using the Genuino 101 board, including: LEDs, resistors, sensors, ICs, motors and LCD display and base plate Genuino 101 - equipped with 32-bit Intel Curie microcontroller.

Check theSparkFun Inventor's Kit for Genuino 101 + motherboard.

UC - Microcontroller x86 Intel Curie
UC - Core x86
UC - Flash 196 kB
UC - RAM 2,5 kB
UC - Digital pins 14
UC - analog in 6
UC - freq 32 MHz
UC - PWM 4
UC - USB microUSB
UC - Bluetooth yes
Package width 0.001 cm
Package height 0.001 cm
Package depth 0.001 cm
Package weight 0.001 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: