- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Description
Module with 1.3 MPx camera with resolution of 1280 x 1024 px and the frequency of up to 30 frames per second. It extends the capabilities of the microcontroller with the ability to shoot photos and record videos. The device operates with a voltage of 3.3 V, it has a sensitivity of 1.1 V/(lux*sec), the angle of view is 25 ° (non-linear), the lens is 1/4".
|
The product is compatible with STM32 and AVR The manufacturer has prepared a user guide along witha sample program for the STM32. |
Specification
- Supply voltage: 3.3 V
- Resolution: 1280 x 1024 px (1.3 MPx)
- The number of frames per second: up to 30 frames per second for VGA format
- Lens size: 1/4 "
- Sensitivity: 1.1 V/(lux*sec)
- View Angle: 25 ° (non-linear)
- Output formats:
- YUV / YCbCr 4:2:2
- RGB565/555
- GRB 4:2:2
- RAW RGB Data
- Module dimensions: 35 x 24 mm
Pins
The device has soldered 18-pin, double row connector with the pitch of 2.54 mm.
| Pin | Description |
|---|---|
| 3.3 V | Supply voltage is 3.3 V. |
| GND | The ground of the system. |
| SIOC | The clock input of the serial interface. |
| SIOD | Serial interface of I/O data. |
| VSYNC | Vertical synchronization. |
| HREF | The HREF output. |
| PCLK | The clock output of the matrix. |
| XCLK | The input of the system clock. |
| D7 | The output of video data - bit 7. |
| D6 | The output of video data - bit 6. |
| D5 | The output of video data - bit 5. |
| D4 | The output of video data - bit 4. |
| D3 | The output of video data - bit 3. |
| D2 | The output of video data - bit 2. |
| D1 | The output of video data - bit 1. |
| D0 | The output of video data - bit 0. |
| RESET | The system reset is activated with the low status. |
| PWDN | Disabling the system is activated by the high status. |
Useful links |
