ADXL335 3-axis analog accelerometer - SparkFun SEN-09269

Index: SPF-02404 EAN: 5904422364298

Sensor for measuring acceleration in three axes in the range of ± 3 g. Powered with the voltage from 1.8 V to 3.6 V; it consumes only 320 uA of the current. The output signal is an analog voltage proportional to measured acceleration. A board is a square with a side of 18 mm.

ADXL335 3-axis analog accelerometer - SparkFun SEN-09269
€19.50
€15.85 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: SparkFun
Compatibility: Arduino

Specification

  • Supply voltage: 1.8 V - 3.6 V
  • Consumption of the current: up ot 320 uA
  • Three axes: X, Y, Z
  • Measuring range: ± 3 g
  • Communications: the analog signal - voltage
  • Installed filters in the form of condensers of 100 NF for each axis
  • Pins: holes forgoldpin connectors- 2.54 mm pitch
  • The dimensions of the board: 18 x 18 mm
 

 

Description

The module with ADXL335 accelerometer to measure accelerations in the three axes: X, Y, Z; in the range of +/- 3 g. The sensor is powered with the voltage in the range from 1.8 to 3.6 V. It consumes only 320 uA of current. The output is an analog voltage signal proportional to the measured acceleration. The sensor can be controlled using any microcontroller with analog-to-digital converter, for example, a set ofArduinoorSTM32Discovery.

 

The product is compatible with Arduino

On the websitebildr.org, you can find a description of the connection with the sample program for Arduino

 

Pins

The sensor has six pins for mounting the goldpin strap - 2.54 mm pitch (not included in package, sold separately). After soldering the connectors, the module can be connected usingwiresor attach it to the breadboard.

ADXL335 3-osiowy akcelerometr analagowy

Name

Description

VDD The module's supply voltage is in the range of 1.8 V to 3.6 V
GND The ground of the system.
ST Self Test - a detailed description inthe documentation.
X Analog, voltage output signal of the X axis with the value proportional to the measured acceleration.
Y Analog, voltage output signal of the Y axis with the valueproportional to the measured acceleration.
Z Analog, voltage output signal of the Z axis with a value proportional to the measured acceleration.

 

Package width 5 cm
Package height 0.5 cm
Package depth 9 cm
Package weight 0.002 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: