CNC Shield V3.00 driver for 3D printer - pad for Arduino
CNC Shield V3.00 driver for 3D printer - pad for Arduino
CNC Shield V3.00 driver for 3D printer - pad for Arduino
CNC Shield V3.00 driver for 3D printer - pad for Arduino - zdjęcie 1
CNC Shield V3.00 driver for 3D printer - pad for Arduino - zdjęcie 2
CNC Shield V3.00 driver for 3D printer - pad for Arduino - zdjęcie 3

CNC Shield - 3D printer driver - Shield for Arduino

Index: MOD-06186 EAN: 5904422308285
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com

Shield for Arduino, which allows you to build a 3D printer driver or other CNC equipment's driver. Facilitates the use of stepper motors. It has connectors for modules A4988 RepRap.

€3.88
€3.16 tax excl.
Waiting for confirmation of delivery date
Product unavailable
30-day returns
PayPal payment
Manufacturer: OEM
Compatibility: Arduino

Description of CNC Shield - 3D printer driver - Shield for Arduino

Shield for Arduino, which allows you to build a 3D printer driver or other CNC equipment's driver. Thanks to the four connectors for the motor driver, e.g. A4988, it facilitates the use of stepper motors. The board is compatible with G-codeinterpreter, GRBL. It has derived inputs and inputs of the movement directionof the steps for four drivers, inputs forend sensors END STOP and outputs of I2C bus and UART.

 

CNC Shield - 3D printer driver - Shield for Arduino

The module is compatible withArduino Uno and Mega- Arduino boards can be purchased separately.

 

Attention!

Shield is compatible with the Protoneerproduct - however, this is not an original product of this company.

 

With the ability to connect up to 4 stepper motors and a GRBL interpreter, creating your own 3D printer has never been eaier. Shield is assembled - requires no soldering. A motor driver, for exampleA4988, must be purchased separately.

 

Detailed information can be found in the user manual.

 

 

Specification: CNC Shield - 3D printer driver - Shield for Arduino

  • Voltage motor power supply (depending on driver): from 12 V to 36 V
  • Power supply voltage is connected via a screw connector ARK
  • Operating voltage logic signal: 5 V
  • Connectors of the motor driver compatible withA4988and the like
  • Output signals: STEP and DIR signals for the four drivers: X.STEP / Y.DIR, X.STEP / Y.DIR, Z.STEP / Z.DIR, A.STEP / A.DIR
  • Output  connectors, UART and I2C
  • Inputs for end sensors, limit switches type END STOP:  Z+ / Z-, Y+ / Y-, X+ / X-,
  • Embedded capacitors 100 uF and 50 uF 8 mm
  • Resistors 10 ohms
  • Outputs for motors
  • Compatible withGRBL 0.8 c

 

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

You might also like

A4988 - stepper motor driver RepRap 35V/2A - Pololu 1182

Stepper motor driver based on the A4988 system. Voltage supply in the range of 8 to 35 V with maximum current consumption of 2 A per coil. Maximum resolution: 1/16 of a step....
Index: PLL-00148
Index: PLL-00148
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.40 Price €6.40

Arduino Uno Rev3 - module A000066

The original module from the Arduino® Uno with the AVR microcontroller ATmega328 in an interchangeable housing. It has 32 KB Flash memory, 2 KB RAM, 14 digital I/o of which...
Index: ARD-01060
Index: ARD-01060
In stock, shipping 24 hours!
(Check quantity)
Regular price €21.48 Price €21.48

Customers who bought this product also bought:

A4988 - stepper motor driver RepRap 35V/2A - Pololu 1182

Stepper motor driver based on the A4988 system. Voltage supply in the range of 8 to 35 V with maximum current consumption of 2 A per coil. Maximum resolution: 1/16 of a step....
Index: PLL-00148
Index: PLL-00148
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.40 Price €6.40

Touch screen - resistive LCD 5'' 800x480px HDMI + USB for Raspberry Pi 3/2/B+/Zero - Waveshare 10563

Waveshare touch screen, 5" resistive for Raspberry Pi with 800 x 480 px resolution. Works with Raspberry Pi versions 3, 2 and B+ via HDMI and USB cable.
Index: WSR-04466
Index: WSR-04466
Unavailable
Regular price €32.33 Price €32.33

Limit switch 50mm - Pololu 1403

SPDT limit switch  position with extended metal plate with a length of 50 mm.
Index: PLL-00017
Index: PLL-00017
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.36 Price €1.36

StepStick DRV8825 Stepper Motor Driver

Stepper motor's driver based on the system DRV8825, allows you to control the motor with a current consumption of up to 1.5 A (with cooling of up to 2.2 A) per coil, at...
Index: MOD-03739
Index: MOD-03739
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.45 Price €3.45

Thermally conductive glue 10g

AG TermoGlue thermo-conductive adhesive. Package contains 10 g of adhesive.
Index: CHE-02003
Index: CHE-02003
Available, 24h shipping!
(Check quantity)
Regular price €1.52 Price €1.52

Stepper Motor JK42HS40-0504 200 steps/rotations 12V/0,5A/0,43Nm

A bipolar stepper motor, four wired. Has a resolution of 200 steps per rotation (1.8 degree). It is powered with a voltage of 12.0 V, consumes 500 mA per coil. Torque is 4.4 k...
Index: MOT-03610
Index: MOT-03610
Delivery scheduled for 2021-12-14
Regular price €11.94 Price €11.94

Stepper motor driver A4988 RepRap - green

Stepper motor driver based on the A4988 system. Voltage supply in the range from 8V to 35 V, with maximum current consumption of 1 A per coil. Maximum resolution: 1/16 of a...
Index: MOD-02964
Index: MOD-02964
Waiting for confirmation of delivery date
Regular price €2.58 Price €2.58

Electrolytic capacitor 470uF/25V 10x16mm 105C THT - 10pcs

Through hole electrolytic capacitor of 470 uF / 25 V. Pins' pitch: 3 mm. Size: Ø8 x 12 mm. Price is for 10 pieces.
Index: PAS-00295
Index: PAS-00295
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.63 Price €0.63

Power supply 9V/2A - angle DC plug 5,5/2,5mm

Power supply unit. Supply voltage: 100 V to 230 V. Output voltage: 9 V DC. Output current: up to 2 A. Angular connector: 5.5 / 2.5 mm.
Index: ZAS-04286
Index: ZAS-04286
Waiting for confirmation of delivery date
Regular price €4.10 Price €4.10

Socket DC 2,5/5,5 for the prototype contact plate

Connector suitable for standard prototypes of the breadboard with a pitch of 2.54 mm. the module allows to connect the power supply with the plug of 2.5/5.5 mm.
Index: MOD-01610
Index: MOD-01610
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.06 Price €1.06

String bags 50x70mm 50um - 100pcs.

String pouches for storing, sorting small electronic parts such as ICs, diodes and many other items. They are 7 cm high, 5 cm wide and 50 microns thick.
Index: NSZ-04222
Index: NSZ-04222
Available, 24h shipping!
(Check quantity)
Regular price €0.63 Price €0.63

Set of breadboard 830 + cables + power module

The kit includes a contact plate with 830 holes, power supply module and cables. These elements allow for creating connections on the board itself as well as between it and the...
Index: PLY-01670
Index: PLY-01670
Available, 24h shipping!
(Check quantity)
Regular price €4.97 Price €4.97

Products from the same category

Forbot Robot Shield for Arduino

Forbot Robot Shield is an extension board for Arduino, which is adding to it, everything what's necessary for making robot. On board of the module, found can be, i.a. the...
Index: FOR-07901
Index: FOR-07901
In stock, shipping 24 hours!
(Check quantity)
Regular price €21.68 Price €21.68

L293D Motor Driver Board - 2-channel motor driver 16V/0.6 A - Shield for Arduino - Iduino ST1138

The module allows you to control four DC motors (DC) or two stepper motors using Arduino kits. The system allows to adjust the direction and speed of rotation of the motors...
Index: MOD-08224
Index: MOD-08224
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.97 Price €4.97

TB6612 Motor Shield - 4x DC motor driver - 12V/1,2 A - Shield for Arduino

The module allows you to control four DC motors (DC), with two stepper motors or two servos using Arduino kits. The system allows you to adjust the direction and speed of...
Index: GRL-12811
Index: GRL-12811
In stock, shipping 24 hours!
(Check quantity)
Regular price €21.68 Price €21.68

Ramps 1.4 RepRap driver for 3D printer

Popular driver of 3D printer, adapted to work with Arduino Mega 2560 and stepper motors driver A4988. The system requires a power source with an output voltage of 12 V and...
Index: MOD-02193
Index: MOD-02193
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.36 Price €5.36

Robot Arm Braccio TinkerKit + Arduino Shield driver

Arm of the robot for self-assembly, equipped with 6 servos. There is also a special controller Braccio in the form of cap over the Arduino and the necessary mounting elements....
Index: ROB-06362
Index: ROB-06362
In stock, shipping 24 hours!
(Check quantity)
Regular price €237.62 Price €237.62

Arduino Motor Shield Rev3

Module allows control of two DC motors (DC) using Arduino kits. The system allows you to adjust the direction and speed of rotation of DC motors with a current consumption up...
Index: ARD-01215
Index: ARD-01215
In stock, shipping 24 hours!
(Check quantity)
Regular price €22.79 Price €22.79

Zumo Shield v1.2 - main board for Arduino - Pololu 2508

The controller is suitable for Arduino connectors allowing you to build a fighting robot - minisumo. It works with Uno, Leonardo boards and their derivatives.
Index: PLL-02936
Index: PLL-02936
In stock, shipping 24 hours!
(Check quantity)
Regular price €21.27 Price €15.95
  • Reduced price
  • On sale

DFRobot TB6612 - 4-channel motor driver 13.5V/1.2A - Shield for Arduino

The module allows you to control four DC motors (DC) using boards of the Arduino. The system allows you to adjust the direction and rotation speed of the motors with a current...
Index: DFR-07441
Index: DFR-07441
In stock, shipping 24 hours!
(Check quantity)
Regular price €13.87 Price €13.87

DFRobot L298P 2-channel motor driver 35V/2A - Shield for Arduino

Arduino overlay to control two DC motors (35V/2A). For communication it uses four Arduino pins, allows to change the speed and direction of motor rotation.
Index: DFR-02686
Index: DFR-02686
Waiting for confirmation of delivery date
Regular price €12.13 Price €12.13

MAX14870 - 2-channel motor driver 28V/1,7 A - Shield for Arduino - Pololu 2519

Modul with dual-channel driver of motors MAX14870 working with voltages from 4.5 V to 36 V and current up to 1.7 A per channel (max 2.5 A). The system can be directly connected...
Index: PLL-11843
Index: PLL-11843
In stock, shipping 24 hours!
(Check quantity)
Regular price €13.00 Price €13.00

DRV8835 dual - 2-channel motor driver 11V/1,2 A - Shield for Arduino - Pololu 2511

Module with two-channel circuit DRV8835 operating with voltages from 2 V to 11 V and current up to 1.2 A per channel (max. 1.5 A). The system can be connected directly to the...
Index: PLL-02671
Index: PLL-02671
Available, 24h shipping!
(Check quantity)
Regular price €18.64 Price €18.64

Motor Control Shield - 4-channel motor driver 9V/0.6A - Shield for Arduino - Waveshare 9724

The module allows you to control four DC motors or two stepper motors using Arduino kits. The system allows you to adjust the direction and speed of rotation of the motors...
Index: WSR-04914
Index: WSR-04914
In stock, shipping 24 hours!
(Check quantity)
Regular price €7.36 Price €7.36