• EOL

Arduino M0 - 32 bit Cortex M0

Index: ARD-04541

Atmel ATSAMD21G18 module with 32-bit microcontroller equipped with ARM Cortex M-0 core. It has 256 kB Flash memory, 32 kB RAM, 14 digital inputs/outputs of which 12 PWM channels, 6 analogue inputs and one output and popular communication interfaces. It works with voltage of 3,3 V.

Arduino M0 - 32 bit Cortex M0
€23.90
€19.43 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Arduino

Attention!

The sale of the product has been completed. Check otherdevices in this category.

Description

The board contains an ATSAMD21G18 microcontroller with a 32-bit ARM Cortex M0 core. The module is equipped with 14 digital inputs/outputs, 12 of which can be used as PWM outputs (e.g. for controlling motors) and 6 analogue inputs with higher than previously 12-bit resolution. Another distinguishing feature of this model is the presence of a 10-bit analogue DAC output. The circuit is clocked with a 48 MHz clock signal. The outputs work with a voltage of 3.3 V.

Arduino M0 - moduł 32 bit

The subject of sale is original Arduino product, Botland is anofficial distributor of this company.

Arduino M0 unlike M0 Pro does not have a built-in EDBG debugger.

In our offer you will also find Arduino M0 Pro version with debugger.

Connectors layout is compatible with Arduino Uno. It means that Shields will be compatible provided they work with 3.3V. M0 has two microUSB sockets:

  • Programming - a slot dedicated to upload software via Arduino IDE environment,
  • Native - allows you to connect USB devices, also allows programming and connection to a serial monitor.

Main features

Below we present some features that distinguish Arduino modules from other programmable tiles.

The name Description

Installed

bootloader

Thanks to the installed bootloader, the appropriatemicroUSB cable andsoftware from the manufactureris sufficient to program the device.

ARM Cortex M0

32-bit

The board contains an ATSAMD21G18 microcontroller with a powerful 32-bit ARM Cortex M0 core.

Arduino .

Shield

The layout of the connectors enables installation of dedicatedArduino Shieldcovers, provided that they operate at 3.3V.

Extracts

digital

14 digital inputs/outputs enable, among other things, to control LEDs, relays and read button statuses.

Performance

Current

The maximum current capacity of a single output is 7 mA.

Outputs

PWM

12 PWM outputs allow e.g. for motor control and LED brightness adjustment.

Inputs

analogue

6 inputs of the built-in 12-bit analogue-to-digital converter support, among others, sensors with analogue output.

Communication

serial

The device supports popular communication interfaces, among others: UART, I2C and SPI.

Memory

Embedded

ATSAMD21G18 chip is clocked with 48 MHz signal, has 256 kB program memory and 32 kB SRAM.

Power supply

DC connector

Any power supplyfrom 6 V to 15 V with 5.5 x 2.1 mm DC connector can be used to power Arduino.

Power supply

USB port

You can power the board from your computer viathe microUSB cable,whilekeeping in mindthat the maximum current capacity of the USB port is 500 mA. Arduino has a system that protects the socket against short circuit and too high current flow.

The connector .

ICSP

The module has ICSP outputs, on which the SPI interface has been output.

Pin

IOREF

The IOREF pin allows for direct access to the voltage with which the I/O outputs work.

Built-in

LED

The connected LED on pin 13 allows debugging of simple programs.

Arduino M0 - moduł 32 bit

The distribution of elements on Arduino M0 board.

Specification .

  • Power supply voltage: 5 V
  • The voltage of the leads: 3,3 V
  • Maximum current from one output: 7 mA
  • Microcontroller: ATSAMD21G18
    • The core: ARM Cortex-M0 32-bit
    • Maximum clock frequency: 48 MHz
    • SRAM: 32 kB
    • Flash memory: 256 kB
    • EEPROM memory: 16 kB (emulated)
    • Ports I/O: 14
    • PWM outputs: 12
    • Number of analog inputs: 6 (A/C converter channels 12 bits)
    • Number of analog outputs: 1 (DAC channel 10 bits)
    • Serial interfaces: UART, SPI, I2C
  • Connected LED

UC - Microcontroller ATSAMD21G18
UC - Core 32-bit ARM Cortex M0
UC - EEPROM 16 kB
UC - Flash 256 kB
UC - RAM 32 kB
UC - Digital pins 14
UC - analog in 6
UC - A/C 12-bit
UC - C/A 1
UC - PWM 12
UC - USB microUSB
Package width 0.001 cm
Package height 0.001 cm
Package depth 0.001 cm
Package weight 0.001 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: