- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Li-Pol Redox 5000 mAh 20C 3S 11.1 V pack
Redox brand universal lithium polymer battery pack with a capacity of 5000 mAh, consists of three cells. The output voltage is 11.1 V, and the constant discharge current is 20 C (100 A). The battery terminates with XT90 socket and 3EModel/Redox balancer output. Li-Pol batteries are often used in modeling and robotics. Redox packs have a long and narrow shape.
Li-Pol Redox 5000 mAh 20C 3S 11.1 V battery.
The Li-Pol Redox 5000 mAh pack has an XT90 connector.Redox battery specification
- Battery type: lithium-polymer
- Connectors: XT90 socket and 3EModel/Redox balancer output
- XT90 cable length: 10 cm
- Maximum charging current: 1C (5 A)
- Voltage: 11,1 V
- Capacity: 5000 mAh
- Constant discharge current: 100 A (20C)
- Battery dimensions: 127 x 43 x 26 mm
- Weight: 322.2 g
We also offer chargers matched to the pack connectors.
Proper charging of Li-Pol batteries
When using Li-Pol packs you should pay special attention to proper charging of cells. It is important to maintain balanced cells, i.e. even charging (to the same voltage level) of each cell in relation to the others. There are many chargers for Li-Pol packs, both simple compact and advanced microprocessor based chargers are available.
Storage is also an important issue. If the cells will not be used for a long time, it is a good idea to put them into the Storage level (microprocessor chargers have a program that will automatically put the packs into this state). This mode will charge or discharge the pack to the level of 3.7 V per cell - which is the best voltage in the context of Li-Pol pack performance, as well as its life.
CAUTION!
Before use, be sure to read the LI-POL BATTERY USE AND WARRANTY TERMS!
