- EOL
|
Attention! The product has been discontinued. Check other products in category. |
Product description: Li-Pol pack Redox 2400 mAh 20C 3S 11.1 V
This lithium polymer battery pack from Redox has a capacity of 2400 mAh and consists of three cells. The output voltage is 11.1 V and the constant discharge current is 20 C (48 A). The outputs of the battery are wires terminated with a DEAN socket and an output to a balancer. Li-Pol batteries are often used in modeling and robotics. ASG series Redox packs have a very long and narrow shape, so they fit perfectly in ASG rifles, as well as in narrow fuselages of gliders.
Li-Pol Redox 2400 mAh 20C 3S 11.1 V battery.
Li-Pol Redox 2400 mAh pack has a DEAN connector.
Battery specification
- Manufacturer: Redox
- Battery type: lithium-polymer
- Connectors: DEAN and output to the balancer
- Length of DEAN cables: 10 cm
- Maximum charging current: 1C (2.4 A)
- Voltage: 11,1 V
- Capacity: 2400 mAh
- Constant discharge current: 48 A (20C)
- Battery dimensions: 127 x 20 x 31 mm
- Weight: 153 g
We also offer chargers adapted to battery pack connectors.
Proper charging of Li-Pol batteries
When using Li-Pol pack s you should pay special attention to proper charging of cells. It is important to maintain balanced cells, i.e. even charging (to the same voltage level) of each cell in relation to the others. There are many chargers for Li-Pol packs, both simple compact and advanced microprocessor based chargers are available.
Storage is also an important issue. If the cells will not be used for a long time, it is a good idea to put them into the Storage level (microprocessor chargers have a program that will automatically put the packs into this state). This mode will charge or discharge the pack to the level of 3.7 V per cell - which is the best voltage in the context of Li-Pol pack performance, as well as its life.
CAUTION!
Before use, be sure to read the LI-POL BATTERY USE AND WARRANTY TERMS!
