- Reduced price










Aluminum mount to Pololu micromotors with the improved strength. The price is for the two pieces.
Strong, durable and light mounts for mounting the Pololu micro motors. They have a special ledge to accurately position the gearing. Mounting holes are threaded - M3 thread. Weight of a single piece is 1.5 g (without screws). The set has the mounting kit - 2 PCs.
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia
Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain
No customer reviews for the moment.
Wheels 32x7mm - black - 2pcs - Pololu 1087
Set of the plastic wheels (2 PCs.) with rubber tyres providing a high adhesion. They are suitable for engines with Pololu gears.Micro metal gearmotor HP 10:1 3000RPM - Pololu 999
Polol's miniature 10:1 high power motor with a gearbox, 3000 rpm, 0.22 kg*cm (0.021 Nm) torque.Ball Caster 1/2'' - plastic - Pololu 952
Lightweight plastic ball in the bowl with a diameter of 0.5 inches. It is ideal to use to support the front of the two-wheeled robot.HP Motor with 30:1 Gear - Pololu 1093
Polol's miniature 30:1 high power motor with a gearbox, 1000 rpm, 0.6 kg*cm (0.059 Nm) torque.Customers who bought this product also bought:
KTIR0711S reflective optocoupler sensor - 5pcs
Reflective optocoupler used, for example, to distinguish the edges. The system is closed in a small, surface soldered case with dimensions: 2.7 x 3.4 mm. Items are sold in...Gray ribbon cable (50 cm) IDC raster 1.27mm
IDC 10-wire ribbon cable. Raster: 1.27 mm.Micro-Match connector for 10-pin tape
Micro-Match connector on 10-vein tape with a pitch of 1.27 mm.HP Motor with 50:1 Gear - doublesided shaft - Pololu 2213
Polol's miniature 50:1 high power motor with a 630 rpm gearbox, torque is 1.1 kg*cm (0.107 Nm). It has an extended shaft for mounting speed sensors.Tantalum capacitor 10uF / 10V SMD
Capacitance: 10 uF, Voltage: 10 V, Tolerance: 10%, Case: SMD ALinear voltage regulator 5V 7805 - SMD TO263 - 5pcs.
Stabilizer used to supply logic systems supplied with 5V. The maximum output current is 1A. TO263 enclosure (D2PAK).Nylon Distance Bolts 10mm - 10pcs.
Plastic distance bolts, length 10 mm, outer diameter of 6.3 mm and an internal 3.5 mm. Price for 10 pieces. Elements of this type are based on a screw, allow you to keep the...M2,5 PH Screws Length 8mm with Washers - 10pcs.
Set contains 10 pieces of the cross screws with the M2. 5 thread with the length of 8 mm, and 10 washers.Products from the same category
Pololu Motor Mount MT90 / MT100 - 36,5mm
Mount for MT90 / MT100 motors. It is made in the technology of 3D printing.Camera Slider - Actobotics Kit A - SparkFun ROB-13140
Photo slider is made of aluminum with a length of about. 60 cm for self-assembly. It allows you to record stable shots in the linear motion. The system works with multiple...MakeBlock 61812 - 72T Motor Bracket - 25mm
Bracket is made of clear acrylic, 5.5 mm thick, suitable for 25 mm motors. There are mounting holes every 16 mm on the surface, so that it can be used with other elements.Romi Chassis Motor Clip - Black - 2pcs. - Pololu 3520
Black motor clips for the chassis of the robot Pololu Romi. The set includes two clips.MakeBlock 61804 - DC-37 Motor Brackets Type-A - blue - 2pcs
Aluminum brackets for motor DC 37. The set includes 2 pieces of brackets and screws.NEMA 43 - L-type Step Motor Mount - 110x110mm
Mounting to a 110 x 110 mm stepper motor. The mounting holes for the mounting are made so that the product is compatible with most NEMA 43 compliant motors. Screws for...End piece with motor or roller attachment
An end piece for structural profiles, designed for fixing tension rollers and Nema 17 motors. In combination with V-Slot profiles, toothed belt and tension roller , we can...MakeBlock 61802 - DC-25 Motor Brackets Type-B - blue - 2pcs.
Aluminum bracket for DC 25 motor. The set includes 2 pieces of brackets and screws for mounting.Toothed Belt 10x180mm + Gear 12T - 5mm - 2pcs.
The kit of the belt and the compatible gears. The circuit of the belt is around 180 mm, and its width is 10 mm. The wheel has 12 teeth. The width of the tooth surface is 11.2...NEMA 51- L-type Step Motor Mount - 130x130mm
The mounting is for stepper motor sizes according to NEMA 51 standard. The mounting has mounting holes for most 130 x 130 mm motors. To mount the motor you will need mounting...Aluminium Motor Mount 15.5D mm - 2pcs. - Pololu 1599
Aluminum mountingd from Pololu allow for installation of engines from 15.5 D and the popular micro-motors with gearbox.