• EOL

Step-up converter 12V WY-ELI-IS-200-300cm with a sound sensor for EL cables

Index: ODS-13784 EAN: 5904422321437

A small converter for electroluminescent wires with audio input. It has a built-in small microphone so that it lights up the connected EL wire depending on the volume of the surrounding sound. The device requires 12 V DC input to work properly.

Step-up converter 12V WY-ELI-IS-200-300cm with a sound sensor for EL cables
€8.50
€6.91 tax excl.
The minimum purchase order quantity for the product is 10.
Unavailable
Discontinued product
PayPal payment
Manufacturer: OdSeven

Attention!

The product has been discontinued. Check other products in category.

Description

Smallinverterforlight-emitting cables with audio input.It hasa built-in smallmicrophoneso that it lights up the connected EL cable depending on thevolume of the surrounding sound.The device requires a12 V DC inputfor proper operation(an8 xAAbatterybasket can be used) and is capable of powering 2to 3 meters of high-brightness EL cables or 1 meter ofEL tapeor 10 cm x 10 cm panel continuously for about 48 hours.

On one of the sides of the converter there isa switch to select the fixed /sound / off mode (Full / BL / Off) - fixed means continuous operation. Asingle female JST 2.5mmstandardconnectorfor all EL cables and tapes andtwo power wires are included. The cable marked "+" should be connected under the power source + 12 V and the other one is earthing. The converteroperatesat"audible"frequencies, which means you can hear the squealing coming out of the housing.

The inverter requires a 'load' to stabilise. Do not start the inverter

without at least 30 cm El cable connected. Otherwise, the device may

get stuck and cause damage.

Specification

  • Input voltage: 12 V DC
  • Frequency of operation: 60 Hz to 2000 Hz
  • Model: WY-ELI-IS-200-300CM
  • Current consumption for 1 m. of EL cable: 10 to 15 mA
  • Maximum EL cable length with higher brightness: 3 m
  • Dimensions: 85 mm x 55 mm x 22 mm
  • Weight: 41.80 g
  • Cable length JST: approx. 18 cm
  • The length of the power cord: 13 cm

Length 85 mm
Width 55 mm
Height 22 mm
Cable - type JST
Cable - Standard female
Voltage to 12.0 V
Voltage from 12.0 V
Stabilizer - Type2 switching
Stabilizer - Type step-up
Package width 8 cm
Package height 2.1 cm
Package depth 12 cm
Package weight 0.04 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: