The module of pulse step-up converter for mobile projects. It is powered with a battery LiPol 1S 3.7 V or LiIon, it can provide a stable output voltage with value of 5.2 V and current delivery of up to 1 A. It also has a built-in charger LiPol/Lilon 1 A and monitor of the state of charge of the battery.
A voltage of 5.2 V
Indicator of battery discharge
Module PowerBoost 1000C based on the system TPS61090 which operates at a frequency of 700 kHz. The system has the capability of detecting low battery level. If the battery voltage drops below the value of 3.2 V, the indicator LED illuminates.
The system has the ability to connect the phone via microUSB slot.
Built-in battery charger
The converter also has a built-in module of the battery charger with a current of 1 A and is powered through a micro usb connector. Two LEDs inform about the charging status. The option of automatic selection of power supply, automatically switches the power sources, so you can simultaneously charge them and use the module.
Because the module of charger LiPol / LiIon has a charge current of 1 A, the power through the microUSB should be of good quality and have a performance of at least 2 A. The set includes USB-A connector for self-soldering.
- Input voltage: of rechargeable battery Li-Pol 1S 3.7 V (from 3.0 V to 4.2 V)
- Output voltage: 5,2 V
- Output DC: up to 1 A
- Output AC: up to 2.5 A
- LED indicating the low battery level - the voltage at the cell below 3.2 V
- It can work as a charger for smartphones
- JST slot - in our offer, there is a compatible cable
- Efficiency above 90 %
- Mounting holes: diameter of 2 mm
- Dimensions: 45 x 23 x 10 mm
- Weight: 6 g