Product description: FEP film for Creality 3D printers - 266 x 190 mm
FEP foil with dimensions of 266 x 190 mm used in the following models of Creality 3D printers: LD-006, Halot-Sky and Halot-Lite . It is an consumable item. It is mounted on the bottom of the resin tank . Provides high UV light transmittance (approx. 95%), necessary for curing the printing material. The subject of sale is one FEP foil .
The offer of our store also includes a wide selection of Creality 3D printers , spare parts and accessories useful during work.
FEP film for Creality 3D printers - 266 x 190 mm .
Light-transmitting film for selected models of 3 Creality printers .
Stages of foil replacement
- First, remove the empty resin tank from the 3D printer
- Then remove the 14 screws to remove the old FEP foil from the bottom of the resin vat
- Place a new FEP foil between the two steel frames
- The foil mounted between two steel frames should be screwed to the tank again with 14 screws
- The last step is to reinstall the ladle with the new foil in the 3D printer
- The FEP foil should not be cleaned with sharp tools. This could scratch its surface
Specification of FEP film
- Developer: Creality
- Spare part type: FEP foil
- Compatible Creality 3D printers: LD-006, Halot-Sky, Halot-Lite
- Produced in dust-free conditions
- It has a uniform, smooth surface
- UV transmittance: approx. 95%
- Ductility: 300%
- Thermal resistance: up to 200 ° C
- Thickness: 0.15 to 0.2 mm
- Dimensions: 266 x 190 mm
Useful links |
