• EOL

Minisumo DIY KIT

Index: ROB-01226 EAN: 5904422372262

Kit allows you to build educational robot minisumo class. The kit Includes a course with which you will learn the process of designing, installation and programming electronic components.

Minisumo DIY KIT
€22.50
€18.29 tax excl.
Unavailable
Discontinued product
PayPal payment
Manufacturer: Botland

Attention!

The product has been discontinued. Check other products in category.

Description

Set allows you to build educational fightingrobot minisumo class. While working on the design, the user will gain knowledge about the development and implementation of electronic circuits, and develop software for microcontrollers.

 

The full instruction course for the robot manufacture is available on the roboticsforum forbot.pl. The lessons are written in a simple and understandable by an author of many interesting articles.

 

Hand made robot in accordance with therulesof the minisumo competition, and therefore can participate in numerous robot tournaments organized in Poland. The schedule and venues of the competitions can be found in the calendarhere.

 

 

Additional items

In addition to the items included in the package, the user needs alsoa rechargeable batterywithcharger,wheelsandmotors with gear. These elements were not added to the set intentionally to allow users to select components based on individual needs. For starters, you can just use the motors and batteries you already have at home.

 

Motors

The designers of the best robots currently use with mikromotors Pololu HP with reducer30:1or50:1. For installation using specialplastic mounting or a more durable version ofaluminum. An alternative may be to use angular motors ormodelins motors (without the reducer, you should do it yourself). The user needs two power units, for each wheel one at a time.

 

Wheel

Very popular among robots creators are wheels from the brands Pololu and theSolarbotics. The undoubted advantage is their easy installation. They have a hole fit for 3 mm shaft of micro motors andangular motors. The best designs use a tire molded from special materials (more information in article:the casting of the tire). In the case of Solarbotics wheels, you can use their rimb to set your own tires.

 

Koła różnych rozmiarów firmy Pololu o wysokiej przyczepności

 

Battery and charger

Buying charger and battery consumption is an expense for the future. Dynamic robot specialist, sooner or later, will have to purchase a kit of this type. In addition, taking into account the frequency of replacing conventional batteries, would be that the cost of buying the battery and charger will pay off quickly.

 

The most recent power source are rechargeable batteries,Li-polymer. They are of small size with high performance loads. When choose the right package the key parameters are size (the robot must be in a square 10 x 10 cm) and weight (according to the rules of design can not weigh more than 500 g).The user can select any battery fromour offer, which will be useful in future projects.

 

Batteries lithium polymer require special chargers with a balancer. Inour offerwe have a simple charger without the possibility of setup and configuration. However, if the purchase of this set will be the beginning of a long adventure with robotics, we recommend a fast, powerful, customizablechargers Redox.

 

Set includes:

  • Laminate FR4 unilateral 200 x 110 mm (+/- 20 mm)
  • Etchmaster B327
  • The RF800 liquid flux in
  • The microcontroller Atmega8A with a stand
  • 2 x L293D motor driver with stands
  • 2 x optocoupler diffusion CNY70 to detect lines
  • Optical distance sensor Sharp GP2Y0A41SK0F operating in the range 4-30 cm
  • The stabilizer LM1117 LDO with an output voltage of 5 V
  • 10 x electrolytic capacitor 100 uF
  • 10 x electrolytic capacitor 47 UF or 22 UF replacement
  • 10 × 100 NF capacitor ceramic
  • 30 x resistor 10 kω
  • 30 x resistor 220 Ohms, or instead of 240Ohm
  • 30 x 1K resistor
  • 2 x LED 3 mm
  • 10 x inductor axial 10 uh
  • The quartz resonator 8 MHz
Chassis - wheels 2
Chassis - type wheel
Chassis + drive no
Chassis + driver: no
Age 9 + lat
Package width 16 cm
Package height 3.7 cm
Package depth 25 cm
Package weight 0.3 kg

Be the first to ask a question about this product!

Customers who bought this product also bought:

Products from the same category: