Current sensor ACS714 -5A to + 5A - Pololu module
Current sensor ACS714 -5A to + 5A - Pololu module
Current sensor ACS714 -5A to + 5A - Pololu module
Current sensor ACS714 -30A to + 30A - Pololu module
Current sensor ACS714 -5A to + 5A - Pololu module - zdjęcie 1
Current sensor ACS714 -5A to + 5A - Pololu module - zdjęcie 2
Current sensor ACS714 -5A to + 5A - Pololu module - zdjęcie 3
Current sensor ACS714 -30A to + 30A - Pololu module - zdjęcie 4

ACS714 current sensor -30A to + 30A - Pololu 1187

Index: PLL-00524 EAN: 5903351242059
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com

Current sensor operating in the range of +/- 30 A, based on the Hall effect. The output is analog voltage. Supply voltage from 4.5 V to 5.5 V.

€13.18
€10.71 tax excl.

Available, shipping 24h!
(Check quantity)
Shipping in 24 hours
30-day returns
PayPal payment
Manufacturer: Pololu

Connection of the ACS714 current sensor

The sensor requires a supply voltage in the range from 4.5 V to 5 V connected to the pins marked as VCC (+) and GND (ground). The output is a voltage signal proportional to the intensity of the measured current. When VCC is 5V, the output is half-centered, which is 2.5V. The output value increases by 66 mV per 1 A when the measured current is positive, otherwise it decreases.

Main features of the ACS714 current sensor

  • The system is designed for the current flowing in both directions (from -30 A to 30 A)
  • Due to the low resistance of the system (1.2 mΩ) and the connections, the power losses are very small.
  • Thanks to the use of the Hall effect, the current paths are isolated from the logical part.
  • Bandwidth up to 80kHz with the possibility of reduction by adding an optional capacitor
  • Precision of 1.5% at room temperature.

ACS714 current sensor

Additional filtration

The integrated circuit has an internal 1.7 kΩ resistive filter, there is a 1 nF capacitor on the board, which together forms a low pass filter with a cutoff frequency of 90 kHz. The user can modify the filter by installing a capacitor in the pinscalled "filter". The cut-off frequency can be calculated from the formula:

F = 1 / (2πRC) = 1 / (11kΩ * (1 nF + Cf))

whereCfis the capacity of the soldered capacitor in the "filter" pins.

Schemat podłączenia czujnika prądu ACS714

Specification of the ACS714 current sensor

  • Logic supply voltages: 4.5 V to 5.5 V
  • Current consumption of the logical part: 13 mA
  • Sensitivity for 5V power supply: 0.066V / A
  • Module weight 1.3 g
  • Dimensions: 18 x 20.5 mm

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

You might also like

AVR microcontroller - ATmega32A-AU SMD

Popular microcontroller AVR from ATmel in a case soldered on surface (SMD).
Index: UCC-00160
Index: UCC-00160
Waiting for confirmation of delivery date
Regular price €6.58 Price €6.58

STM32F407G-DISC1 - Discovery - STM32F4DISCOVERY

The commissioning kit is built on the basis of STM32F407VGT6 microcontroller, it allows you to get to know the systems equipped with the latest Cortex-M4F core from ARM...
Index: DIS-00445
Index: DIS-00445
Waiting for confirmation of delivery date
Regular price €23.32 Price €23.32

TB6612FNG - two-channel motor controller

Two-channel bridge H. Continuous current per channel 1.2 A temporary to 3.2 A. Supply voltage up to 15 V. SSOP-24 (SMD) housing.
Index: UCC-00495
Index: UCC-00495
Waiting for confirmation of delivery date
Regular price €2.19 Price €2.19

Arduino Uno Rev3 - module A000066

The original module from the Arduino® Uno with the AVR microcontroller ATmega328 in an interchangeable housing. It has 32 KB Flash memory, 2 KB RAM, 14 digital I/o of which...
Index: ARD-01060
Index: ARD-01060
In stock, shipping 24 hours!
(Check quantity)
Regular price €21.78 Price €21.78

Customers who bought this product also bought:

ACS709 current sensor -75A do +75A - Pololu 2199

Current sensor operating in the range of +/- 75 A, based on the Hall effect. The output is analog voltage. Supply voltage from 3.0 V to 5.5 V.
Index: PLL-00526
Index: PLL-00526
Available, shipping 24h!
(Check quantity)
Regular price €17.58 Price €17.58

ACS714 current sensor -5A to + 5A - Pololu 1185

Current sensor working in the range of +/-5 A, based on the Hall effect. The output is an analog voltage. Supply voltage is from 4.5 V to 5.5 V.
Index: PLL-00523
Index: PLL-00523
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.66 Price €9.66

Pololu ACS711 current sensor - 12,5A to + 12,5A

Current sensor operating in the +/-12.5 A range based on the Hall effect. The output is analogue voltage. Supply voltage from 3.0 V to 5.5 V. The product has been replaced by...
Index: PLL-00525
Index: PLL-00525
Unavailable
Regular price €5.94 Price €5.94
  • EOL

Pololu ACS715 current sensor 0 do +30A

Current sensor operating in the range from 0 to +30 A based on the Hall effect. The output is analogue voltage. Power supply from 4.5 V to 5.5 V.
Index: PLL-00592
Index: PLL-00592
Unavailable
Regular price €8.78 Price €8.78
  • EOL

Pololu ACS711 current sensor -25A to + 25A

Current sensor operating in the +/-25 A range based on the Hall effect. The output is analogue voltage. Supply voltage from 3.0V to 5.5V. The product has been replaced by a new...
Index: PLL-00511
Index: PLL-00511
Unavailable
Regular price €5.94 Price €5.94
  • EOL

Bipolar transistor NPN BC547B 50V/0,1A - 5pcs

Bipolar transistor NPN, 50 V, 100 mA. Pinout: CBE. Price for 5 pieces.
Index: UCC-00254
Index: UCC-00254
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.22 Price €0.22

SD card reader module

The module that facilitates the connection of the SD card to the main board (e.g. Arduino or STM32Discovery). It is powered with the voltage of 5 V or 3.3 V. The communication...
Index: MOD-01507
Index: MOD-01507
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.21 Price €1.21

Solder wick for tin 2 mm

Solder wick for removing tin excess. Width 2 mm, length 1.5 m.
Index: NSZ-00172
Index: NSZ-00172
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.86 Price €0.86

LED SMD 0805 blue - 10pcs

LED in SMD 0805 housing blue. Price for 10 pieces.
Index: LED-00235
Index: LED-00235
Waiting for confirmation of delivery date
Regular price €0.42 Price €0.42

Anti magnetic tweezer curved BK15

Stainless steel antimagnetic tweezers. Symbol: Baku BK15ESD.
Index: NSZ-00304
Index: NSZ-00304
Waiting for confirmation of delivery date
Regular price €1.65 Price €1.65

VNH5019 - single-channel 24V / 12A motor controller - Pololu - 1451

Module with ST VNH5019 system working with voltages from 5.5 V to 24 V. Maximum continuous output current is 12 A (momentary: 30 A).
Index: PLL-00456
Index: PLL-00456
Available, 24h shipping!
(Check quantity)
Regular price €80.30 Price €80.30

LED SMD 1206 blue - 10pcs

Led SMD 1206 blue case. Price for 10 pieces.
Index: LED-00458
Index: LED-00458
Waiting for confirmation of delivery date
Regular price €0.42 Price €0.42

Products from the same category

Hall sensor AH49E - Waveshare 9522

Module with Hall sensor with analog and digital output. It works with voltage from 2.3 V to 5.3 V. It provides the detection of a magnetic field.
Index: WSR-04494
Index: WSR-04494
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.84 Price €2.84

AC current sensor SCT 013-030 - up to 30A

The sensor measures the intensity of the current flowing in the cable without its opening. Measurement occurs through the insulation on a single wire, the output is the analog...
Index: MOD-04273
Index: MOD-04273
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.58 Price €6.58

ACS711EX current sensor ACS711EX -15A to + 15A - Pololu 2452

Current sensor working in the range of +/-15 A based on the Hall effect. The output is an analog voltage. Supply voltage is from 3.0 V to 5.5 V.
Index: PLL-01690
Index: PLL-01690
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.38 Price €4.38

Voltage divider 5V/25V for Arduino

A voltage divider is used, when the measured voltage has a larger value than the A/D converter's range. The device works in the range from 0 V to 25 V. The output voltage has a...
Index: MOD-08231
Index: MOD-08231
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.77 Price €0.77

ACS711EX current sensor -31A do +31A - Pololu 2453

Current sensor working in the range of +/- 31 A, based on the Hall effect. The output is an analog voltage. Supply voltage is from 3 V to 5.5 V.
Index: PLL-01689
Index: PLL-01689
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.28 Price €3.28

ACS714 current sensor -5A to + 5A - Pololu 1185

Current sensor working in the range of +/-5 A, based on the Hall effect. The output is an analog voltage. Supply voltage is from 4.5 V to 5.5 V.
Index: PLL-00523
Index: PLL-00523
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.66 Price €9.66

ACS709 current sensor -75A do +75A - Pololu 2199

Current sensor operating in the range of +/- 75 A, based on the Hall effect. The output is analog voltage. Supply voltage from 3.0 V to 5.5 V.
Index: PLL-00526
Index: PLL-00526
Available, shipping 24h!
(Check quantity)
Regular price €17.58 Price €17.58

Module with Hall sensor, magnetic field

Module with Hall sensor, analog magnetic switch. It allows for the detection of the magnetic field. The module has no soldered passive elements. It works with voltage of 5 V.
Index: OST-14290
Index: OST-14290
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.01 Price €1.01

DFRobot Gravity: Analog AC Current Sensor SCT 013-020 - to 20A

The sensor measures the intensity of the current flowing in a pipeline without its opening. Measurement occurs through the insulation on a single wire, and the output is the...
Index: DFR-06932
Index: DFR-06932
In stock, shipping 24 hours!
(Check quantity)
Regular price €19.78 Price €19.78

Current sensor ACS711KLCTR +/- 12A - SMD

Current sensor working in the range of +/-12, A on the basis of Hall effect. The output is an analog voltage. The power supply is from 3.0 V to 5.5 V. Case: SOIC8 (SMD).
Index: SES-00866
Index: SES-00866
Waiting for confirmation of delivery date
Regular price €3.72 Price €3.72
  • EOL

iNode Energy Meter - energy consumption monitor - phototransistor

iNode Energy Meter with a photoresistor is a wireless power consumption monitor with built-in memory. Designed mainly for home automation. Thanks to the power consumption...
Index: INO-09929
Index: INO-09929
In stock, shipping 24 hours!
(Check quantity)
Regular price €23.98 Price €23.98

Current sensor ACS711KLCTR +/- 25A - SMD

Current sensor operating in the range of +/-25, A on the basis of the Hall effect. The output is an analog voltage. The power supply is from 3.0 V to 5.5 V. Case: SOIC8 (SMD).
Index: SES-00864
Index: SES-00864
Waiting for confirmation of delivery date
Regular price €4.38 Price €4.38
  • EOL