HPCB Motor with 10:1 Gear - doublesided shaft - Pololu 3071

Index: PLL-04974 EAN: 5904422306243

Polol' s miniature high power engine with durable carbon brushes. It has a 10:1 transmission, speed is 3000 rpm, torque is 0.3 kg*cm (0.029 Nm). It has an extended shaft for mounting speed sensors.

HPCB Motor with 10:1 Gear - doublesided shaft - Pololu 3071
€26.90
€21.87 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Pololu

Product description: HPCB motor 10:1 double-sided shaft - Polol 3071

Polol's small, lightweight yet powerful engines are used as drive units by robot constructors. The units can be supplied with voltage up to 9 V, the useful power is above 3 V. The optimum voltage at which the power to strength ratio is best is 6 V. This version has an extended shaft with a length of 5.0 mm, allowing the installation ofspeed sensors - encoders.

HPCB motor specification 10:1

Supply voltage:

3 V - 9 V

Unloaded current (6 V):

120 mA

Current at stopped shaft (6 V):

1600 mA

Speed without load (6 V):

3000 rpm

Torque (6 V):

0.3 kg*cm (0.029 Nm)

Gear ratio:

9.96:1

Brushes:

Carbon brushes, high strength

Shaft diameter:

3 mm

Body dimensions:

26 x 12 x 10 mm

The weight:

10 g

Two-sided shaft:

YES

This version has carbon brushes with increased strength and a shaft on both sides for mountingthe encoders.

Engine dimensions

The motor body is a 26 x 12 x 10 mm cuboid. The gearbox is 9,27 mm long. There is a 3 mm D-shaped shaft at the output. Total weight is about 10 g.

The drawing shows the dimensions of the Polol micro motor with gearbox.

Accessories for the motor

We offer a range of accessories that work with Polol's micro motors:

  • Mountings
    Special mountings in whiteorblack have been designed for motor mounting.There is also anextendedversion available and made ofaluminum withincreased strength.

Mocowania

  • Wheels,crawlers,hubs,encoders
    Our offer also includeswheelsand crawlers, matchedto the shafts of Polol's micro motors. There is also a special version of wheels with speed measurement - encoders. Installation of non-standard wheels is facilitated byadapters.


Koła, gąsienice, huby, enkodery

There are also many othermotorsin the shop's offer.

Length 26 mm
Voltage to 3.0 V
Voltage from 9.0 V
Motor - gear 10:1
Rotation speed 3000 obr/min
Torque 0,3 kg*cm
Mass 10 g
Motor - 2x shaft yes
Voltage nominal 6.0 V
Package width 5 cm
Package height 1 cm
Package depth 2 cm
Package weight 0.01 kg

Be the first to ask a question about this product!

Product reviews

HPCB Motor with 10:1 Gear - doublesided shaft - Pololu 3071

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Krzysztof J. 17.01.2022 Confirmed purchase Translated review
Good value for money.

Customers who bought this product also bought:

Products from the same category: