DFRobot DC 12V 160RPM motor with worm gear

Index: DFR-06939 EAN: 6959420910816

Metal worm gear motor for strength and high torque of 2.2 kg*cm (0.21 Nm). Supply voltage is 12V and speed is 160 rpm.

DFRobot DC 12V 160RPM motor with worm gear
€22.50
€18.29 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: DFRobot

Product description: DFRobot DC 12 V 160RPM motor with worm gearbox

Metal worm gear motor for strength and high torque of 2.2 kg*cm (0.21 Nm). Supply voltage is 12V and speed is 160 rpm. The worm gearbox provides the motor withself-locking capability.

Dimensions

Dimensions of the DFRobot 12 V motor.

Worm gear motor 1:37.3

High quality, small drive unit consisting of a DC motor and a factory installed worm gearbox. Ideal for driving small mobile robots, manipulators and a variety of mechanisms for other applications (e.g. home automation).

The nominal supply voltage of the motor is 12 V, with a tolerable voltage range of 6..15 V. Current consumption ranges from about 35 mA (no load) to 1 A (with the shaft stopped) - typical operating current is about 180 mA.

Mechanical parameters

The DFRobot DC 12V 160RPM worm gear motor with a gear ratio of 1:37.3 reaches a speed of up to 160 rpm (at idling speed); the rated speed is 128 rpm. Rated torque is 0.55 kg*cm and increases to 2.2 kg*cm with the shaft locked. The whole is 77 x 26 x 32 mm and weighs 160 g.

A big advantage of the presented motor is the fact that it uses a worm gear and not - popular in other model drives - planetary or ordinary gear. It is precisely this type of gearbox that has an important advantage that distinguishes it from other methods of transmission: it is self-locking, which means that an attempt to rotate the output shaft "by force" does not cause movement of the remaining elements of the gearbox. Only the drive from the motor itself can move the sprocket and the worm.

Specification

  • Supply voltage: 6 V to 15 V
  • Rated voltage: 12 V
  • Gearbox: 1:37,3
  • No load: 35 mA
  • Rated current: 180 mA
  • The current at the stopped rampart: 1,0 A
  • Idle speed: 160 rpm
  • Rated speed: 128 rpm
  • Rated torque; 0.55 kg*cm (0.05 Nm)
  • Torque at stopped shaft; 2.2 kg*cm (0.21 Nm)
  • Output shaft diameter: 6 mm
  • Output shaft length: 18.5 mm
  • Dimensions: 77 x 26 x 32 mm
  • Weight: 160 g

Length 77 mm
Voltage to 12.0 V
Voltage from 12.0 V
Motor - current 180 mA
Motor - gear 1:37,3
Rotation speed 160 obr/min
Torque 2,2 kg*cm
Mass 160 g
Motor - shaft 6 mm
Voltage nominal 12 V
Package width 15 cm
Package height 5 cm
Package depth 20 cm
Package weight 0.144 kg

Be the first to ask a question about this product!

Product reviews

DFRobot DC 12V 160RPM motor with worm gear

5/5

Average grade

6

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.
Jiří 25.12.2023 Confirmed purchase Translated review
Only the gait could be harder.
Vladimír 01.08.2023 Confirmed purchase Translated review
Quality and utility.
Adam S. 27.01.2022 Confirmed purchase Translated review
For modeling purposes; To anyone in need; Very good
Adam S. 21.12.2021 Confirmed purchase Translated review
I have been using for years, a very good series of motors.
Piotr M. 03.02.2021 Confirmed purchase Translated review
Super engine!
Drahomír 05.10.2023 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: