





Small metal motor powered from 3 V-6 V. Idle current 30 mA/ 3 V. Dimensions: 11.9 x 15.3 mm. Speed: approx. 14 000 rpm.
Small metal motor powered from 3 V-6 V. Idling current 30 mA/ 3 V.Dimensions: 11.9 x 15.3 mm.Speed: approx. 14 000 rpm.
The engine dimensions are shown in the technical drawing below.
Length | 15.5 mm |
Width | 12 mm |
Voltage to | 3.0 V |
Voltage from | 6.0 V |
Motor - current | 30 mA |
Rotation speed | 14000 obr/min |
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia
Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain
No customer reviews for the moment.
Micro Gearmotor HP 30:1 1000RPM with Extended Motor Shaft - Pololu 2212
Polol's miniature 30:1 high power motor with a gearbox, 1000 rpm, 0.57 kg*cm (0.056 Nm) torque. It has an extended shaft for mounting speed sensors.Wheels 32x7mm - black - 2pcs - Pololu 1087
Set of the plastic wheels (2 PCs.) with rubber tyres providing a high adhesion. They are suitable for engines with Pololu gears.DC Motor - Tamiya 980112M Mabuchi FA-130
Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.Motor Tamiya 75026 with accessories - Pololu 1688
Set containing 10500 rpm motor, attack sprocket, double sided tape and vinyl tube.Customers who bought this product also bought:
Pololu MMA7361LC 3-axis analog accelerometer with regulation
3-axis acceleration sensor operating in the range of 1.5 G or 6G. It has a built in voltage regulator which provides power for: 2.2 V - 16 V. The system communicates via...Motor DC 6V, 11500RPM - Pololu 1117
DC brush motor. Nominal voltage 6V. Speed 11500 rpm. Maximum current 800 mA.DC motor - Micromotors HL149 with 21:1 transmission
HL149 DC motor with 21:1 geared motor. 0.075 Nm (0.76 kgcm) torque. Speed 160 rpm. Nominal supply voltage 6 V.Male Headers 1x40 raster 2,54mm straight
Goldpin male 1x40 strap, pitch is 2.54 mm.Precision single row 1x40 raster 2,54mm - female SIP40
Single row precision strap, pitch: 2.54 mm, number of pins: 40.MPL115A2 - digital pressure sensor 115kPa I2C
Digital pressure sensor - a barometer from Freescale. Communication interface: I2C. Measuring range: 50 - 115 kPa. An LGA case.Temperature sensor DS18B20 - digital 1-wire THT
Digital temperature sensor DS18B20 with 1-wire interface. Works in range from -55 °C to 125 °C. It is supplied with the voltage from 3.0 V to 5.5 V.L293D - two-channel 36V / 0,6A motor driver - 5pcs
Two-channel motor controller. Supply voltage up to 36 V . Average current per channel 600 mA (momentary up to 1.2 A). Enclosure: DIP 16 (scrolling). Set contains 5 pieces of...Analog Comparator LM339 - THT - 5pcs
Power supply 36 Volt or +/-18 V. DIP14 Case. Set of 5 pcs.Analog multiplexer / demultiplexer 4052 - THT - 5pcs
4-channel analog multiplexer/demultiplexer in the DIL-16(DIP) case. Set of 5 pcs chips.Products from the same category
Redox Race DC Motor 7,2V 20000RPM
Brush motor providing 0.245 kg*cm (0.02 Nm) torque. Supply voltage is 7.2V and speed is 20000 rpm.Motor DC 6V, 11500RPM - Pololu 1117
DC brush motor. Nominal voltage 6V. Speed 11500 rpm. Maximum current 800 mA.DFRobot Gravity - Propeller with DC 3-6V Motor Module
A small motor module with controller with the possibility of rotational speed control. The device is compatible with Arduino. The kit also includes an impeller and a cable.GPX Extreme Swift 400 Motor - 6,0V
Metal motor powered from 3.6 V to 8.6 V. Idle current 770 mA. Dimensions: 57 x 28 mm. Torque is 0.45 kg*cm (0.04 Nm).