Sharp GP2Y0D805Z0F Cyfrowy czujnik odległości 5cm
Sharp GP2Y0D805Z0F Cyfrowy czujnik odległości 5cm
Sharp GP2Y0D805Z0F Cyfrowy czujnik odległości 5cm
Sharp GP2Y0D805Z0F Cyfrowy czujnik odległości 5cm
Sharp GP2Y0D805Z0F Cyfrowy czujnik odległości 5cm
Sharp GP2Y0D805Z0F Cyfrowy czujnik odległości 5cm - zdjęcie 1
Sharp GP2Y0D805Z0F Cyfrowy czujnik odległości 5cm - zdjęcie 2
Sharp GP2Y0D805Z0F Cyfrowy czujnik odległości 5cm - zdjęcie 3
Sharp GP2Y0D805Z0F Cyfrowy czujnik odległości 5cm - zdjęcie 4
Sharp GP2Y0D805Z0F Cyfrowy czujnik odległości 5cm - zdjęcie 5

Sharp GP2Y0D810Z0F - digital distance sensor 10cm with PCB base - Pololu 1134

Index: PLL-01623

Digital distance sensor Sharp GP2Y0D805Z0F to detect objects at a distance of up to 10 cm. The system has soldered PCB stand, making it easier to use it.

€10.67
€8.68 tax excl.

In stock, shipping 24 hours!
(Check quantity)
Shipping in 24 hours
30-day returns
Manufacturer: Pololu
Compatibility: Arduino Raspberry Pi

Specification

  • Supply voltage: 2.7 V to 6.2 V
  • Average current consumption: 5 mA
  • Measuring range: from 2 cm to 10 cm
  • Output value: digital signal (low status when detecting an object, otherwise - high)
  • Response time: 2,55 ms (max. 3.77 ms)
  • Soldered stand for PCB
  • Weight: 0.7 g

 

Description

The sensor can detect object in the range of up to 5 cm. The output is a digital signal. High status (logical one) indicates no object in the field of view of the sensor. Low status (logical zero) appears when the object is detected.

 

 

Schemat działania czujnika Sharp

A drawing depicting a method of operating a digital sensor Sharp.

 

PCB stand

The sensor has soldered PCB stand that facilitate the installation and use of the sensor. Board has the essential passive components for the sensor's operation and LED signaling the detection of the object. Using the stand, the sensor's maintenance is reduced to connecting three pins: power - VCC, ground - GND, and a logic output signal, marked with the OUT symbol. Board has goldpin pins that facilitate the connection of the sensor with the commissioning set (e.g. Arduino or STM32Discovery) via connecting cables.
 

The product is compatible with Arduino

For proper operation, it is sufficient to connect power supply of 5 V and the sensor output to any digital pin of Arduino. Reading is done through a standard function digitalRead(number_of_pin).

 

Alternative distance sensors

In our store, available are analog versions of sensors detecting the objects in the range of: 4-30cm10-80cm20-150cm and digital sensors, to detect objects in the field of view of up to: 5 cm10cm and 40cm.

 

Voltage to 2.7 V
Voltage from 6.2 V
Interface Digital I / O
Sensor - distance to 10 cm
Sensor - distance from 2.0 cm

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Cyprus, Finland, Greece, Ireland, Malta, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR


Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

STM32F407G-DISC1 - Discovery - STM32F4DISCOVERY

The commissioning kit is built on the basis of STM32F407VGT6 microcontroller, it allows you to get to know the systems equipped with the latest Cortex-M4F core from ARM...
Index: DIS-00445
Index: DIS-00445
Unavailable
Regular price €24.35 Price €24.35

Digital Sharp sensor stand

The PCB base makes it easy to connect the Sharp digital distance sensor to the main design module.
Index: MOD-00942
Index: MOD-00942
Unavailable
Regular price €2.30 Price €2.30

ATmega8 mini module - microBOARD-M8

Module microBOARD-M8-miniature set of run with the host microcontroller ATmega8A.
Index: MOD-00970
Index: MOD-00970
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.95 Price €6.95

Arduino Uno Rev3 - module A000066

The original module from the Arduino Uno with the AVR microcontroller ATmega328 in an interchangeable housing. It has 32 KB Flash memory, 2 KB RAM, 14 digital I/o of which 6...
Index: ARD-01060
Index: ARD-01060
In stock, shipping 24 hours!
(Check quantity)
Regular price €21.40 Price €21.40

Customers who bought this product also bought:

Alcohol sensor MQ-3 - semiconductor

Alcohol sensor with analog output. It measures the content of alcohol, for example, in the exhaled air.
Index: DNG-00061
Index: DNG-00061
Czas oczekiwania: ok. 10-30 dni
Regular price €1.98 Price €1.98

Stand for MQ - gas sensor - Pololu 1479

Stand that allows mounting of sensors from MQ series.
Index: PLL-00238
Index: PLL-00238
Czas oczekiwania ok. 10-21 dni
Regular price €1.15 Price €1.15

Soldering flux RF800 15ml

Liquid flux type "no clean". The package has a volume of 15 ml.
Index: CHE-00433
Index: CHE-00433
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.15 Price €1.15

IR transmitter TSUS4300 3mm 950nm

Infrared transmitter in a 3 mm threaded housing. Emitted wavelength 950 nm. The design of the transmitter allows easy and efficient implementation of the transmitter into our...
Index: LED-00868
Index: LED-00868
Available, 24h shipping!
(Check quantity)
Regular price €0.30 Price €0.30

Laminate FR4 single-sided size L

FR4 laminate on one side with a thickness of about 1.0 mm. Copper layer 35 um. The sheet dimensions are 130 x 200 mm, with a tolerance of 20 mm.
Index: LUT-00931
Index: LUT-00931
Waiting time: about 10-30 days
Regular price €1.37 Price €1.37

Force sensor FSR-406 - 2kg square 38mm - Pololu 1645

Force sensor changes its resistance when the force applied to the square tip, increases. The sensor in the form of a rectangle with side of 38 mm.
Index: PLL-01040
Index: PLL-01040
In stock, shipping 24 hours!
(Check quantity)
Regular price €13.72 Price €13.72

Infrared receiver TSOP4838 - 38kHz

IR receiver TSOP4838, it is operating at a frequency of 38 kHz.
Index: SES-01047
Index: SES-01047
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.67 Price €0.67

Etcher for circuit boards B327 - 100g

Printed circuit board etching agent. Dissolves very quickly and does not crystallise from the solution. It etch evenly, ensuring sharp contours and minimising irritation.
Index: CHE-01057
Index: CHE-01057
Available, 24h shipping!
(Check quantity)
Regular price €1.09 Price €1.09

Solder wire Cynel LC60 100g / 0.38mm

Solder with flux with a diameter of 0.38 mm and  reel  weight of 100 gr.
Index: NSZ-01065
Index: NSZ-01065
In stock, shipping 24 hours!
(Check quantity)
Regular price €8.12 Price €8.12

Connecting cables male-to-male 20cm - 40pcs

Set includes 40 PCs of multi-colored hook-up wires with a length of 20 cm ended, on both sides, with the male connector.
Index: KAB-01223
Index: KAB-01223
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.38 Price €1.38

RM1 Relay module with optoelectronic isolation 5V 10A/125VAC

The module is equipped with SRD-05 relay with 5V coil with optical input isolation. The system allows to control the actuators by means of microcontroller ports or any starter...
Index: MOD-01293
Index: MOD-01293
Unavailable
Regular price €3.00 Price €3.00

Set of heat shrink tubes 22pcs - length 50mm

Set of 22 heat shrink tubes with  a length of 50 mm  with different diameters in different colours.
Index: ETN-01460
Index: ETN-01460
Unavailable
Regular price €0.91 Price €0.91

Products from the same category

Adjustable digital distance sensor E18-D80NK 5-80cm

Adjustable, digital distance sensor with a cable length of 50 cm and nuts to facilitate mounting. Measuring range from 5 to 80 cm, is configured using a knob. Voltage supply...
Index: MOD-02575
Index: MOD-02575
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.33 Price €5.33

VL53L0X time-of-flight - distance and ambient light sensor I2C, 200cm max - Pololu 2490

Digital sensor connecting proximity measurement with the time-of-flight method and the ability to measure the intensity of ambient light. Works in range up to 200 cm with 1 mm...
Index: PLL-07176
Index: PLL-07176
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.65 Price €9.65

Sharp GP2Y0D810Z0F - digital distance sensor 10cm - Pololu 1135

Digital distance sensor Sharp GP2Y0D805Z0F to detect objects at a distance of up to 10 cm.
Index: PLL-00011
Index: PLL-00011
In stock, shipping 24 hours!
(Check quantity)
Regular price €8.12 Price €8.12

Distance sensor, reflective 3,3V/5V - 30mm - Waveshare 9523

The reflective module with IR sensor equipped with digital and analog output. It works with a voltage from 3 V to 5.3 V. It enbales the detection of obstacles in the range from...
Index: WSR-04459
Index: WSR-04459
In stock, shipping 24 hours!
(Check quantity)
Regular price €3.60 Price €3.60

Sharp GP2Y0D805Z0F - digital distance sensor 5cm

Digital distance sensor Sharp GP2Y0D805Z0F to detect objects at a distance of up to 5 cm.
Index: PLL-00027
Index: PLL-00027
Unavailable
Regular price €5.09 Price €5.09

Distance sensor carrier with voltage regulator VL53L1X - 400cm - Pololu 3415

Digital sensor, connecting the proximity measurement via method of time-of-flight, and the ability to measure the intensity of ambient light. Working range is up to 400 cm...
Index: PLL-11842
Index: PLL-11842
In stock, shipping 24 hours!
(Check quantity)
Regular price €11.14 Price €11.14

Distance sensor, reflective - IR diode + phototransistor - 3.3V / 5V - 20cm

The reflective module with IR sensor equipped with digital output. It works with a voltage from 3.3 V to 5 V. It enbales the detection of obstacles in the range of 2 to approx....
Index: GRL-12526
Index: GRL-12526
Unavailable
Regular price €0.69 Price €0.69

Sharp GP2Y0D810Z0F digital rangefinder 10cm

Adjustable, digital distance sensor with a cable with the length of 50 cm and nuts to facilitate the mounting. Measuring range is from 3 to 80 cm, it is set via knob. It is...
Index: MOD-09841
Index: MOD-09841
Czas oczekiwania: ok. 10-30 dni
Regular price €4.64 Price €4.64

Proximity sensor - Halla - NJK-5002C / 10mm 5-24V

Digital proximity sensor with Hall effect, it has a cable with the length of 114.5 cm and nuts for facilitating the mounting. It detects the magnetic objects at a distance of...
Index: MOD-09912
Index: MOD-09912
Czas oczekiwania: ok. 10-30 dni
Regular price €3.47 Price €3.47

38 kHz IR Proximity Sensor, Fixed Gain, High Brightness - Pololu 2578

Proximity sensor, operating in the infrared range. It has a permanent amplification. This version of high brightness, consumes around 16 mA when powered at 5 V. The sensor...
Index: PLL-07622
Index: PLL-07622
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.47 Price €5.47

Sharp GP2Y0D805Z0F - digital distance sensor 5cm with PCB base - Pololu 1132

Digital distance sensor Sharp GP2Y0D805Z0F to detect objects at a distance of up to 5 cm. The system has soldered PCB stand, making it easier to use it.
Index: PLL-01622
Index: PLL-01622
In stock, shipping 24 hours!
(Check quantity)
Regular price €10.35 Price €10.35

VL6180X time-of-flight - distane and ambient light sensor I2C - Pololu 2489

A digital sensor combining time-of-flight proximity measurement and the ability to measure ambient light intensity. It operates up to 10 cm with a resolution of 1 mm. It...
Index: PLL-04856
Index: PLL-04856
Available, 24h shipping!
(Check quantity)
Regular price €8.12 Price €8.12