SHT35 - Digital Temperature and Humidity Sensor Breakout - DFRobot SEN0333

Index: DFR-17381 EAN: 6959420916702

DFRobot temperature and humidity sensor with I2C communication. Its operation is based on the Sensirion SHT35 sensor chip. It is compatible with 3.3 V / 5 V Arduino type controllers,micro:bit,ESP32. The measuring range for temperature is from -40°C to 125°C and for humidity from 0% to100% RH.

SHT35 - Digital Temperature and Humidity Sensor Breakout - DFRobot SEN0333
€19.90
€16.18 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: DFRobot
Compatibility: Arduino

Product description: SHT35 - digital temperature and humidity sensor I2C

DFRobot temperature and humidity sensor withI2Ccommunication.Its operation is based on the Sensirion SHT35 sensor chip. It is compatible with 3.3V / 5V Arduino, micro:bit, ESP32 type controllers. The measuring range for temperature is from -40°Cto 125°C (withaccuracy of ± 0.2℃) and for humidity from 0% to 100% RH (withaccuracy of ± 1.5% RH).The sensor has the advantage of very precise calibration, which takes place automatically. It has low power consumption and also has high interference immunity.

cyfrowy czujnik temperatury i wilgotności
Digital temperature and humidity sensor with I2C interface.

The module has outputs in the form of soldering fields, to which you can solder goldpin connectors - raster 2.54 mm (included in the kit). They allow to connect the circuit with the main module (e.g. Arduino) orconnect to thecontact board.

Product compatible with Arduino

The manufacturer has prepared auser guide andlibrary with asample program forArduino users.

Schemat podłączenia

Pin Description
VCC Pin power.
GND The weight of the system.
SCL Clock line of the I2C interface.
SDA I2C interface data line.
INT

Pin alarm and interruption.

RST Module reset activated in a low state.

Sensor specification SHT35

  • Operating voltage: 2.15 V to 5.5 V
  • Working current: <1.5 ma="" span="">
  • Temperature
    • Measuring range: -40°C to 125°C
    • Accuracy: ± 0.2°C
  • Humidity
    • Measuring range: 0% RH to 100% RH
    • Accuracy:± 1,5%RH within the range from 0% RH to 80% RH (at 25℃)
  • Communication: I2C
  • Outline dimension: 19 x 16 mm / 0.75 x 0.63 inch
  • Mounting hole size: 2 mm / 0.08 inch
  • Spacing of mounting holes: 15 mm / 0.59 inch

Interface I2C
Sensor - Temperature to 125 °C
Sensor - Temperature accuracy +/- 0.2°C
Sensor - Temperature from -40 °C - 120 °C
Package width 5.2 cm
Package height 2.5 cm
Package depth 6.2 cm
Package weight 0.007 kg

Be the first to ask a question about this product!

Product reviews

SHT35 - Digital Temperature and Humidity Sensor Breakout - DFRobot SEN0333

5/5

Average grade

2

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Michael 08.05.2023 Confirmed purchase
does what its supposed to do!
Tomasz 07.11.2022 Confirmed purchase Translated review
everything's fine

Customers who bought this product also bought:

Products from the same category: