• Reduced price

BD65496MUV - single-channel motor controller 16V/1,2A - Pololu 2960

Index: PLL-04238 EAN: 5904422364496

Single-channel DC motor controller. Continuous current per channel 1.2 A (momentary up to 5.0 A). Supply voltage up to 16 V.

BD65496MUV - single-channel motor controller 16V/1,2A - Pololu 2960
€18.00 -30%
€12.60
€10.24 tax excl.
Lowest price 30 days: €12.08
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Pololu
Compatibility: Arduino Raspberry Pi

Description: Polol BD65496MUV - single channel 16V/1.2A motor controller

The module based on theBD65496MUV systemallows to control one DC motor. The motor can be powered up to 16 volts with a continuous current draw of up to 1.2 A, temporary (for 10 ms) up to 5.0 A. We recommend that you read thesystem documentationbefore use.

The kit includes a controller and connectors for self-soldering.

Connecting the controller

The motor supply voltage of 2 to 16 V must be connected to the VIN input. The power supply for the logical part from 2.5 V to 5.5 V is fed to the VCC pin. The controller can operate in two modes, selected via the PWM (MODE) pin:

  • IN/IN mode

In this mode, the signals on the INA and INB direction selection pins are also used for speed control via PWM.

Opis wyprowadzeń sterownika silników Pololu

Wiring diagram in IN/IN mode.

  • EN/IN mode

In this mode, the INA input is used to select the direction of rotation, the INB is speed control via PWM signal.

Opis wyprowadzeń sterownika silników Pololu

Wiring diagram in EN/IN mode.

Truth table

The table shows the dependencies of the outputs on the input signals:

Controller outputs BD65496MUV

The module has 2.54 mm raster leads for self-soldering goldpin connectors - the strip is included in the set.

Opis wyprowadzeń sterownika silników Pololu

PIN Description

VIN

Motor supply voltage from 0 V - 11 V with reverse connection protection.
GND The weight of the module.
VCC Supply voltage of the logical part from 1.8 V to 7 V.
OUTA Outputs 1 to connect the motor outputs.
OUTB Outputs 2 to connect the motor outputs.

PWM

(MODE)

Selection of operating mode:

  • low state: IN/IN mode
  • high state: EN/IN mode

Default is low.

INA Motor control pin A (in EN/IN mode used to select the direction of rotation). Default is in low state.
INB Motor control pin B (used in EN/IN mode for speed setting via PWM signal). Default is low.
PS If a low state is given, it will go to sleep. The default is high.
TR1 Entry 1 to the control of the PWM period. Default is in low state. Details onmanufacturer's website.
TR2 Entry 2 to control the PWM period. Default is in low state. Details onmanufacturer's website.

Video .

Film describing the operation of the H-bridge - direct current motor controller.

Polol BD65496MUV motor controller specification

  • Number of channels: 1
  • Power supply voltage: 2 V to 16 V
  • Operating voltage of the logical part: 2.5 V to 5.5 V
  • Continuous current per channel: 1,2 A
  • Maximum instantaneous current per channel (up to 10 ms): 5.0 A
  • PWM frequency: up to 500 kHz
  • Reverse power connection protection
  • Dimensions: 15.5 x 15.5 mm
  • Weight: 0.6 g (without connectors)
  • Included module and goldpin connectors

Voltage to 2.0 V
Voltage from 16.0 V
Current 1.2 A
Channels 1
Package width 7.6 cm
Package height 8.5 cm
Package depth 0.3 cm
Package weight 0.002 kg

Be the first to ask a question about this product!

Product reviews

BD65496MUV - single-channel motor controller 16V/1,2A - Pololu 2960

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: