TB6612FNG - Two channel motor controller
TB6612 - Two-channel motor controller
TB6612 - Two-channel motor controller
TB6612 - Two-channel motor controller
TB6612 - Two-channel motor controller
TB6612 - Two-channel motor controller
TB6612FNG - Two channel motor controller - zdjęcie 1
TB6612 - Two-channel motor controller - zdjęcie 2
TB6612 - Two-channel motor controller - zdjęcie 3
TB6612 - Two-channel motor controller - zdjęcie 4
TB6612 - Two-channel motor controller - zdjęcie 5
TB6612 - Two-channel motor controller - zdjęcie 6

TB6612FNG - two-channel motor controller

Index: UCC-00495

Two-channel bridge H. Continuous current per channel 1.2 A temporary to 3.2 A. Supply voltage up to 15 V. SSOP-24 (SMD) housing.

PLN7.28
PLN7.28 tax excl.

Available, 24h shipping!
(Check quantity)
Shipping in 24 hours
30-day returns

Product description: TB6612FNG - two-channel motor controller

Two-channel bridge H. Continuous current per channel 1.2 A temporary up to 3.2 A. Supply voltage up to 15 V. SSOP-24 (SMD) housing.

Controller specifications

  • Maximum supply voltage for motors: 4.5 to 15 V
  • Continuous current 1,2 A
  • The current of the moment: 3,2 A
  • Low current mode (Standby)
  • Possibility to change the direction of engine rotation
  • Quick stopping of the engine
  • Case: SMD SSOP24
  • The controller's channels can be connected to achieve greater current capacity

Sterownik silnika TB6612FNG

We also offer a module with the TB6612 controller. The system has holes for goldpin connectors (2.54 mm raster), which allow for connecting to a contact plate or connecting with wires.

TB6612FNG chip outputs.

PIN DESCRIPTION
VCC Power supply for 4.5 to 15V motors - filtered with 22uF (C30) and 100nF (C22) capacitors
VDD Power supply for the logical part 2.7V to 5.5V - filtered with 10uF (C25) and 100nF (C24) capacitors
A_PWM PWM input of channel A
B_PWM PWM input of channel B

A_IN2

A_IN1

Input defining the direction of rotation of channel A

B_IN2

B_IN1

Input defining the direction of rotation of channel B

MA_OUT1

MA_OUT2

Channel A motor outputs

MB_OUT1

MB_OUT2

Channel B motor outputs
MGND Separate ground potential path for the power supply of the motors (ground connected at one point)
GND Separate path of mass potential for the logical part (masses connected at one point

Connection diagram of a bridge with two DC motors.

Connection diagram of a bridge with one DC motor. Connected channels. Increased current capacity.

PIN DESCRIPTION
VCC Power supply for 4.5 to 15V motors - filtered with 22uF (C30) and 100nF (C22) capacitors
VDD Power supply for the logical part 2.7V to 5.5V - filtered with 10uF (C25) and 100nF (C24) capacitors
PWM Connected PWM inputs of channels A and B

IN2

IN1

Connected inputs defining the direction of rotation of channels A and B

M_OUT1

M_OUT2

Combined channel A and B motor outputs
MGND Separate ground potential path for the power supply of the motors (ground connected at one point)
GND Separate path of mass potential for the logical part (masses connected at one point

Film describing the operation of the H-bridge - DC motor controller.

Voltage to 4.5 V
Voltage from 15.0 V
Current 1.2 A
Channels 2

Same-day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day! 

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia, Spain, The United Kingdom

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Cyprus, Finland, Greece, Ireland, Malta, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR


Be the first to ask a question about this product!

No customer reviews for the moment.

You might also like

Micro Gearmotor HP 30:1 1000RPM with Extended Motor Shaft - Pololu 2212

Polol's miniature 30:1 high power motor with a gearbox, 1000 rpm, 0.57 kg*cm (0.056 Nm) torque. It has an extended shaft for mounting speed sensors.
Index: PLL-00010
Index: PLL-00010
Available, 24h shipping!
(Check quantity)
Regular price PLN58.46 Price PLN58.46

Micro metal gearmotor HP 10:1 3000RPM - Pololu 999

Polol's miniature 10:1 high power motor with a gearbox, 3000 rpm, 0.22 kg*cm (0.021 Nm) torque.
Index: PLL-00015
Index: PLL-00015
Available, 24h shipping!
(Check quantity)
Regular price PLN51.95 Price PLN51.95

TB6612FNG - two-channel motor controller 13.5V / 1A - Pololu 713

Polol module with a two-channel direct current motor controller. It is powered from 4.5 V to 13.5 V. Continuous current per channel is 1 A, with both channels connected the...
Index: PLL-00032
Index: PLL-00032
Available, 24h shipping!
(Check quantity)
Regular price PLN13.41 Price PLN13.41

L298N - two-channel motor driver

Two-channel bridge H. Supply voltage: max. 46 V. Maximum instantaneous current 2 A. Enclosure: Multiwatt15 (THT).
Index: UCC-00060
Index: UCC-00060
Available, 24h shipping!
(Check quantity)
Regular price PLN10.49 Price PLN10.49

VNH3SP30 - 36V / 30A motor driver

Single-channel bridge H. Supply voltage: max. 36 V. Continuous current 9 A, instantaneous 30 A. Housing: SO-30 Multipower.
Index: UCC-00097
Index: UCC-00097
Unavailable
Regular price PLN39.84 Price PLN39.84

Micro metal gearmotor HP 298:1 100RPM - Pololu 994

Polol's miniature high-power motor with 298:1 gearbox, 100 rpm, 5.0 kg*cm (0.490 Nm) torque.
Index: PLL-00116
Index: PLL-00116
Available, 24h shipping!
(Check quantity)
Regular price PLN51.95 Price PLN51.95

DC Motor 120:1 120RPM - angular - Pololu 1124

Small plastic motor with 120:1, 120 rpm, torque 1.4 kg*cm (0.137 Nm). The motor can be an alternative to Polol micro motors.
Index: PLL-00121
Index: PLL-00121
Available, 24h shipping!
(Check quantity)
Regular price PLN17.80 Price PLN17.80

DC Motor - Tamiya 980112M Mabuchi FA-130

Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.
Index: PLL-00138
Index: PLL-00138
Unavailable
Regular price PLN6.91 Price PLN6.91

Customers who bought this product also bought:

L298N - two-channel motor driver

Two-channel bridge H. Supply voltage: max. 46 V. Maximum instantaneous current 2 A. Enclosure: Multiwatt15 (THT).
Index: UCC-00060
Index: UCC-00060
Available, 24h shipping!
(Check quantity)
Regular price PLN10.49 Price PLN10.49

LM35DZ temperature sensor - analog THT

Analog thermometer, in which the output voltage is proportional to the measured temperature from the range of: -55 °C to 150 °C. It is powered with the voltage from 4 V to 30 V.
Index: SES-00376
Index: SES-00376
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN4.27 Price PLN4.27

Limit switch 50mm - Pololu 1403

SPDT limit switch  position with extended metal plate with a length of 50 mm.
Index: PLL-00017
Index: PLL-00017
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN4.84 Price PLN4.84

CNY70 reflective optocoupler sensor

Reflective optocoupler used, for example, to distinguish the edges or for line detection. Case dimensions - 7 x 7 x 6 mm,through hole installation.
Index: UCC-00052
Index: UCC-00052
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN2.40 Price PLN2.40

Ball Caster 3/8'' - plastic - Pololu 950

Lightweight plastic ball in the bowl with a diameter of 3/8 inches, it is used to support the front of the two-wheeled robot.
Index: PLL-00030
Index: PLL-00030
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN6.46 Price PLN6.46

LEGO Adapter - 3mm Shaft - Pololu 1011

The adapter allows you to connect the lego wheels with hexagonal shafts of 3 mm.
Index: PLL-00145
Index: PLL-00145
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN9.35 Price PLN9.35

Servo TowerPro SG-90 - micro - 180 degrees

Servo type micro. Speed: 0.1 sec/60 ° . Torque: 1.8 kg*cm Dimensions: 22 x 12 x 27 mm. Weight: 9 g.
Index: MOT-00484
Index: MOT-00484
Czas oczekiwania: ok. 10-30 dni
Regular price PLN6.26 Price PLN6.26

DC Motor - Tamiya 980112M Mabuchi FA-130

Small metal motor reaching 12,300 rpm with a supply voltage of 3 V.
Index: PLL-00138
Index: PLL-00138
Unavailable
Regular price PLN6.91 Price PLN6.91

Phototransistor TEFT4300 3mm 925nm

Phototransistor in the case of 3 mm. Maximum sensitivity for the wave with the length of 925 nm. The reading angle is 30 °. Darkened lens.
Index: UCC-00446
Index: UCC-00446
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN1.38 Price PLN1.38

Phototransistor 940nm - L-53P3C

Phototransistor in the case of 5 mm. Maximum sensitivity for the wave with the length of 940 nm. The reading angle is 30 °. Transparent lens.
Index: UCC-00271
Index: UCC-00271
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN1.22 Price PLN1.22

Universal plate PDU21 - THT

Plate for the installation of THT threaded elements. It has 240 holes, its external dimensions are 51 x 46 mm.
Index: PLY-00175
Index: PLY-00175
Unavailable
Regular price PLN2.40 Price PLN2.40

KTIR0711S reflective optocoupler sensor - 5pcs

Reflective optocoupler  used, for example, to distinguish the edges. The  system is closed in a small, surface soldered case with dimensions: 2.7 x 3.4 mm. Items are sold in...
Index: UCC-00053
Index: UCC-00053
In stock, shipping 24 hours!
(Check quantity)
Regular price PLN10.16 Price PLN10.16

Products from the same category

L293D - two-channel 36V / 0,6A motor driver - 5pcs

Two-channel motor controller. Supply voltage up to 36 V . Average current per channel 600 mA (momentary up to 1.2 A). Enclosure: DIP 16 (scrolling). Set contains 5 pieces of...
Index: UCC-00176
Index: UCC-00176
Available, 24h shipping!
(Check quantity)
Regular price PLN7.24 Price PLN7.24

TB6612FNG - two-channel motor controller 13.5V / 1A - Pololu 713

Polol module with a two-channel direct current motor controller. It is powered from 4.5 V to 13.5 V. Continuous current per channel is 1 A, with both channels connected the...
Index: PLL-00032
Index: PLL-00032
Available, 24h shipping!
(Check quantity)
Regular price PLN13.41 Price PLN13.41

L298N - two-channel motor controller - 12V/2A

Module with dual-channel driver for DC motors L298. It is supplied with the voltage up to 12 V. Maximum current per channel is 2 A. The system has embedded voltage regulator 5...
Index: MOD-03164
Index: MOD-03164
Czas oczekiwania ok. 10-30 dni
Regular price PLN11.30 Price PLN11.30

DRV8835 - two-channel motor controller 11V / 1,2A - Pololu 2135

Two-channel DC motor controller. Continuous current per channel 1.2 A (momentary to 1.5 A). Power supply from 2.0 to 11 V.
Index: PLL-00851
Index: PLL-00851
Available, 24h shipping!
(Check quantity)
Regular price PLN14.55 Price PLN14.55

L298N - two-channel motor driver

Two-channel bridge H. Supply voltage: max. 46 V. Maximum instantaneous current 2 A. Enclosure: Multiwatt15 (THT).
Index: UCC-00060
Index: UCC-00060
Available, 24h shipping!
(Check quantity)
Regular price PLN10.49 Price PLN10.49

DRV8838 - single-channel motor controller 11V/1,7A - Pololu 2990

Single-channel DC motor controller. Continuous current per channel 1.7 A (momentary to 1.8 A). Supply voltage up to 11 V.
Index: PLL-02695
Index: PLL-02695
Available, 24h shipping!
(Check quantity)
Regular price PLN11.30 Price PLN11.30

DRV8801 - single-channel motor controller 36V / 1A - Pololu 2136

Single-channel DC motor controller. Continuous current per channel 1 A (momentary to 2.8 A). Supply voltage from 8 V to 36 V.
Index: PLL-01256
Index: PLL-01256
Available, 24h shipping!
(Check quantity)
Regular price PLN16.18 Price PLN16.18

VNH5019 - single-channel 24V / 12A motor controller - Pololu - 1451

Module with ST VNH5019 system working with voltages from 5.5 V to 24 V. Maximum continuous output current is 12 A (momentary: 30 A).
Index: PLL-00456
Index: PLL-00456
Available, 24h shipping!
(Check quantity)
Regular price PLN78.05 Price PLN78.05

DRV8833 - two-channel motor controller 10,8V/1,2A - Pololu 2130

Two-channel DC motor controller. Continuous current per channel 1.2 A (momentary to 2 A). Power supply from 2.7 to 10.8 V.
Index: PLL-00546
Index: PLL-00546
Available, 24h shipping!
(Check quantity)
Regular price PLN16.22 Price PLN16.22

Motor regulator DC 12-40V / 10A / 400W - with a speed control knob

A simple controller with an integrated rotary potentiometer to control the speed of a DC motor up to 400 W. Powered from 12 V to 40 V.
Index: MOD-06666
Index: MOD-06666
Available, 24h shipping!
(Check quantity)
Regular price PLN20.24 Price PLN20.24

L298N Dual H Bridge DC StepperMotor Driver Board - Iduino ST1112

Module with a two-channel direct current motor controller L298N. It is powered from 5 V to 46 V. The maximum channel current is 2 A. The system has a built-in voltage regulator...
Index: MOD-08227
Index: MOD-08227
Available, 24h shipping!
(Check quantity)
Regular price PLN17.80 Price PLN17.80

two-channel h-bridge - SN754410NE

H-bridge - controller based on MOSFET transistors supplied with voltage from 4.5 to 36 V with current capacity up to 2 A.
Index: UCC-02153
Index: UCC-02153
Available, 24h shipping!
(Check quantity)
Regular price PLN12.15 Price PLN12.15