The e-paper display with a diagonal of 5,83" in E-Ink technology with a resolution of 600 x 448 px. Works with a voltage from 3.3 V to 5 V. Communicates through the SPI interface. Display supports 3 colors: black, white and yellow. This kind of displays can be used for reading e-books and e-journals. The set has HAT shield for Raspberry Pi.
The sale includes display with HAT shield, minicomputer Rasberry Pi must be purchased separately.
The product is compatible with Adruino and Raspberry
The basic module has 8-pin connector.
|VCC||Supply voltage: from 3.3 V to 5 V.|
|GND||The mass of the system.|
|DIN||Pin MOSI of SPI interface.|
|CLK||Clock pin of the SPI interface.|
|CS||Chip select is activated by low status.|
Selection data / commands.
High status - data
Low status - commands
|RST||External reset is activated by low status.|
|BUSY||"Busy" status' output, activated by the low status.|
- Supply voltage: 3.3 V and 5 V
- Power: 26,4 MW
- Interface: SPI
- External dimensions: 125.4 x 99.5 mm
- Display's dimensions: 118,8 x 88,26 mm
- Pixel: 0.197 x 0,198 mm
- Resolution: 600 x 448 px
- The gray level: 2
- Full time of update: 26 s
- Displayed colors: black, white and yellow
- Viewing angle: 170 °