The e-paper display with a diagonal of 7,5" in E-Ink technology with a resolution of 640 x 384 px. Works with a voltage of 3.3 V. Communicates through the SPI interface. Display supports 3 colors: black, white and yellow. This kind of displays can be used for reading e-books and e-journals. The set has HAT shield for Raspberry Pi.
The sale includes display with HAT shield, minicomputer Rasberry Pi must be purchased separately.
The main module has 8-pin connector.
|VCC||Supply voltage: 3.3 V|
|GND||The ground of the system.|
|DIN||Pin MOSI of SPI interface.|
|CLK||Clock pin of the SPI interface.|
|CS||Chip select is activated by low status.|
Selection data / commands.
High status - data
Low status - commands
|RST||External reset is activated by low status.|
|BUSY||"Busy" status' output, activated by the low status.|
- Supply voltage: 3.3 V
- Power of supply: 38 mW
- Interface: SPI
- External dimensions: 111,2 x 170 mm
- Display size: 163,2 x 97,92 mm
- Pixel: 0,255 x 0,255 mm
- Resolution: 640 x 384 px
- The gray level: 2
- Time of full update: 16 sec
- Displayable colors: black, white and yellow
- Viewing angle: 170 °