Holding solenoid 12V 2,5W 2kgf

Index: MOD-03095 EAN: 5903351245265

The holding electromagnet powered with the voltage of 12 V with a power of 2.5 W. It holds a weight of 2 kg in standard earth acceleration of 9.8 m/s2. Case diameter is 20 mm, and its height is 15 mm, for mounting used is the hole with the M3 thread.

Holding solenoid 12V 2,5W 2kgf
€6.90
€5.61 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: OEM

Description

The holding electromagnet powered with the voltage of 12 V with a power of 2.5 W. It holds a weight of 2 kg in standard earth acceleration of 9.8 m/s2. Case diameter is 20 mm, and its height is 15 mm, for mounting used is the hole with the M3 thread.

 

 

The device can be used as an actuator powered by any microcontroller, e.g. Arduino. Please note that an electromagnet consumes too much power to connect it directly to the pin of the microcontroller. For this purpose, you can use relayoptoisolator or transistor amplifier.

 

Attention!

The manufacturer recommends maintaining a good heat dissipation from the case so along with the temperature rise of the coil, the force that holds decreases.

  

Specification

  • Supply voltage: 12 V
  • Power: 2.5 W
  • Current consumption: approx. 200 mA
  • Case diameter: 20 mm
  • Height of the case: 15 mm
  • Load capacity: 2 kg (holds the weight of 2 kg for the gravitational acceleration of 9.8 m/S2
  • The wire with insulation removed at the ends with the length of about. 20 cm
  • Mounting hole with the M3 thread (screws not included)
  • Limit temperature: 130 °C
Package width 7 cm
Package height 9.5 cm
Package depth 1.5 cm
Package weight 0.026 kg

Be the first to ask a question about this product!

Product reviews

Holding solenoid 12V 2,5W 2kgf

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: