Electromagnet 12V 3,5W 4kgf

Index: MOD-04599 EAN: 5903351245302

The holding electromagnet powered with the voltage of 12 V with a power of 3.5 W. It holds a weight of 4 kg in standard earth acceleration of 9.8 m/s2. Case diameter is 25 mm, and its height is 20 mm, for mounting used is the hole with the M3 thread.

Electromagnet 12V 3,5W 4kgf
€11.90
€9.67 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: OEM

Description

The holding electromagnet powered with the voltage of 12 V with a power of 3.5 W. It holds a weight of 4 kg in standard earth acceleration of 9.8 m/s2. Body diameter is 25 mm, and its height is 20 mm, for mounting used is the hole with the M3 thread.

 

The device can be used as an actuator powered by any microcontroller, e.g. Arduino. Please note that an electromagnet consumes too much power to connect it directly to the pin of the microcontroller. For this purpose, you can use relayoptoisolator or transistor amplifier.

 

Attention!

The manufacturer recommends maintaining a good heat dissipation from the case so along with the temperature rise of the coil, the force that holds decreases.

Specification

  • Supply voltage: 12 V
  • Power: 3.5 W
  • Current consumption: approx. 300 mA
  • Body diameter: 25 mm
  • Height of the body: 20 mm
  • Load: 4 kgf (holds the weight of 4 kg for the gravitational acceleration of 9.8 m/S2)
  • The wires with insulation removed at the ends with the length of about 20 cm.
  • Mounting hole with the M3 thread (screws not included)
  • Weight : 50 g
Package width 2 cm
Package height 2 cm
Package depth 2.5 cm
Package weight 0.051 kg

Be the first to ask a question about this product!

Product reviews

Electromagnet 12V 3,5W 4kgf

4.5/5

Average grade

2

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.

Zdjęcia użytkowników

Customers who bought this product also bought:

Products from the same category: