Electromagnet 12V 1,5W 50kgf
Electromagnet 12V 1,5W 50kgf
Electromagnet 12V 1,5W 50kgf
Electromagnet 12V 1,5W 50kgf - zdjęcie 1
Electromagnet 12V 1,5W 50kgf - zdjęcie 2
Electromagnet 12V 1,5W 50kgf - zdjęcie 3

Electromagnet 12V 1,5W 50kgf

Index: MOD-06729

Holding electromagnet is powered with voltage of 12 V with the power of 1.5 W. It keeps the weight of 64 kg by standard earth acceleration of 9.8 m/s2. The dimensions of the electromagnet are 80 x 40 x 24 mm. Included is a set of mounting screws.

€20.70
€16.83 tax excl.
Czas oczekiwania: ok. 10-30 dni
Waiting for delivery
30-day returns

Description

Holding electromagnet is powered with voltage of 12 V with the power of 1.5 W. It keeps the weight of 64 kg by standard earth acceleration of 9.8 m/s2. The dimensions of the electromagnet are 80 x 40 x 24 mm. Included is a set of mounting screws.

 

 

The device can be used as an actuator controlled by any microcontroller, e.g. an Arduino. Please note that an electromagnet consumes too much power to connect it directly to the pins of the microcontroller. For this purpose, you can use relaysoptical isolator or transistor amplifier.

 

Attention!

The manufacturer recommends maintaining a good heat dissipation from the housing, because with the temperature rise of the coil, the force that holds, decreases.

 Specification

  • Supply voltage: 12 V
  • Power: 1.5 W
  • Current consumption: approx. 126 mA
  • Load: 50 kgf (keeps weight down to 50 kg for the gravitational acceleration of 9.8 m/S2)
  • The wires with insulation removed at the ends with the length of about 12 cm
  • Set has the installation screws
  • Temperature limit: 130 °C
  • Electromagnet dimensions: 80 x 40 x 24 mm
  • The dimensions of the metal board: 75 x 32 x 11 mm

Included

  • Electromagnet
  • Metal board
  • Set of installation screws
  • Hex key

Same day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!

The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.

Free delivery for orders exceeding 300 PLN!

Only for prepaid orders shipped to Poland.

Terms of delivery outside of Poland

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia

  • Delivery time: 2-4 days
  • Delivery cost: 35 PLN
  • Insurance: 5000 PLN
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: 50 PLN
  • Insurance: 5000 PLN
Kurier GLS - zone 3

Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain

  • Delivery time: 2-7 days
  • Delivery cost: 80 PLN
  • Insurance: 5000 PLN

Terms of delivery in Poland

Card image cap
Poczta Polska
  • Delivery time: 1-3 days
  • Payment in advance: od 9,90 PLN
  • Cash on delivery: 17,90 PLN
  • Insurance: 1000 PLN
Card image cap
Kurier GLS
  • Delivery time: 1-2 days
  • Payment in advance: od 14,90 PLN
  • Cash on delivery: 22,90 PLN
  • Insurance: 6000 PLN
Card image cap
Paczkomaty 24/7
  • Delivery time: 1-3 days
  • Payment in advance: od 12,90 PLN
  • Over 8000 parcel lockers
  • Insurance: 200 PLN
  • Free delivery of orders over 300 PLN does not apply to parcels addressed outside of Poland.
  • The delivery period is counted in working days from the date of dispatch of the order.

Be the first to ask a question about this product!

No customer reviews for the moment.

Customers who bought this product also bought:

Magnetic sensor to open door/window - reed contact CMD918

Wired proximity sensor activated magnetically. The device is used to determine the position of doors and windows. Case dimensions - 9.5 x 18 mm.
Index: SES-03126
Index: SES-03126
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.60 Price €1.60

Relay module 1 channel with optoisolation - 10A/250VAC contacts 5V coil

The module is equipped with relay SRD-05 with coil powered with a voltage of 5 V with optical isolation of input and mounting holes. The system allows you to control actuators...
Index: MOD-01997
Index: MOD-01997
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.84 Price €1.84

Switch with key 2-position AKS-510ZL

The rotary switch is switched with the key. Mounting diameter is equal to 19 mm and a length is of 44 mm.
Index: UCC-06155
Index: UCC-06155
Unavailable
Regular price €3.47 Price €3.47

Rotary switch 8-position 1 circuit - 37mm

Rotary switch, eight-state  for the case, equipped with 9 contacts. The total height is 37 mm.
Index: UCC-06150
Index: UCC-06150
Czas oczekiwania: ok. 10-30 dni
Regular price €0.98 Price €0.98

Magnetic sensor to open door/window - reed contact CMD932P

Wired proximity sensor activated magnetically. The device is used to determine the position of doors and windows. Case dimensions - 9.0 x 32 mm, it has mounting holes.
Index: SES-03127
Index: SES-03127
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.30 Price €2.30

Stepper Motor with 28BYJ-48 Gear 5V/0,1A/0,03Nm with ULN2003 driver

Five-wire stepper motor with driver on Darlington. It has an integrated 64:1 gearbox. It is powered by 5 V and draws 100 mA per coil. The holding torque on the gearbox is 0.3...
Index: MOT-03480
Index: MOT-03480
Available, 24h shipping!
(Check quantity)
Regular price €2.77 Price €2.77

DRV8825 - stepper motor driver 45V / 2,2A - Pololu 2133

Stepper motor's driver based on the system DRV8825, allows you to control the motor with a current consumption of up to 1.5 A (with cooling up to 2.2 A) per coil, when...
Index: PLL-01324
Index: PLL-01324
In stock, shipping 24 hours!
(Check quantity)
Regular price €8.12 Price €8.12

Mini Vibration Motor MT35 3V

Small metal vibrating motor powered by 3 V. Idle current 90 mA. Dimensions: 9 x 5.2 x 5.2 mm.
Index: MOT-04727
Index: MOT-04727
Available, 24h shipping!
(Check quantity)
Regular price €1.14 Price €1.14

Set of Gears and Toothed Belts - 75pcs.

A set of gears, belts and pulleys in various sizes and shapes with 75 elements.
Index: ZEB-06177
Index: ZEB-06177
Available, 24h shipping!
(Check quantity)
Regular price €7.67 Price €7.67

Relay module 2 channels - 10A/250VAC contacts - 5V coil

Dual module is equipped with  SRD-05 relays with the coil powered with the  voltage of 5 V , the transistor amplifier and mounting holes. The system allows you to control...
Index: MOD-02043
Index: MOD-02043
Czas oczekiwania ok. 10-30 dni
Regular price €2.30 Price €2.30

MPR121 I2C touch module - 12 buttons - Adafruit 1982

The module with the MPR121 system that implements 12 of the capacitive touch buttons. Pins can be connected to any of the objects conducting the electric current. The board...
Index: ADA-03405
Index: ADA-03405
In stock, shipping 24 hours!
(Check quantity)
Regular price €10.21 Price €10.21

Liquid level sensor - analog + wires - Waveshare 9525

The sensor is used for determining the liquid's level in the vessel. It is powered with the voltage from 2.0 V to 5.0 V. The output is an analog voltage which increases its...
Index: WSR-04503
Index: WSR-04503
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.77 Price €2.77

Products from the same category

Holding solenoid 12V 2,5W 2kgf

The holding electromagnet powered with the voltage of 12 V with a power of 2.5 W. It holds a weight of 2 kg in standard earth acceleration of 9.8 m/s2. Case diameter is 20 mm,...
Index: MOD-03095
Index: MOD-03095
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.74 Price €6.74

Solenoid, coil, 5V electromagnet - SparkFun ROB-11015

The device allows to perform a linear movement, for example, pulling or pushing, using the voltage signal of 5 V. The range of the bolt is approximately 4.5 mm.
Index: SPF-01996
Index: SPF-01996
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.79 Price €5.79

Holding electromagnet 12V 60kgf

The holding electromagnet is powered with a voltage of 12 V. Keep the weight of 60 kg in standard earth acceleration 9.8 m/S2. The dimensions of the elctromagnet 38 x 80 x...
Index: MOD-09813
Index: MOD-09813
In stock, shipping 24 hours!
(Check quantity)
Regular price €20.70 Price €20.70

Pulling electromagnet 12V 0,7kg

The device allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm.
Index: MOD-03661
Index: MOD-03661
In stock, shipping 24 hours!
(Check quantity)
Regular price €7.42 Price €7.42

Electromagnet 12V 3,5W 4kgf

The holding electromagnet powered with the voltage of 12 V with a power of 3.5 W. It holds a weight of 4 kg in standard earth acceleration of 9.8 m/s2. Case diameter is 25 mm,...
Index: MOD-04599
Index: MOD-04599
In stock, shipping 24 hours!
(Check quantity)
Regular price €10.23 Price €10.23

Holding solenoid 6V 2,5W 2kgf

The holding electromagnet powered with the voltage of 6 V with a power of 2.5 W. It holds a weight of 2 kg in standard earth acceleration of 9.8 m/s2. Case diameter is 20 mm,...
Index: MOD-03096
Index: MOD-03096
Czas oczekiwania: ok. 10-30 dni
Regular price €6.95 Price €6.95

Electromagnet 12V 21W 150g

The device allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm.
Index: MOD-08072
Index: MOD-08072
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.49 Price €6.49

Holding electromagnet 12V 8W 20kgf

The holding electromagnet powered with voltage of 12 V and a capacity of 8 W. It holds a weight of 20 kg in standard earth acceleration 9.8 m/s2. The body diameter is 40 mm and...
Index: MOD-04600
Index: MOD-04600
In stock, shipping 24 hours!
(Check quantity)
Regular price €18.37 Price €18.37

Electromagnet 12V 11W 0,5kg

The device allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm.
Index: MOD-08071
Index: MOD-08071
Czas oczekiwania: ok. 10-30 dni
Regular price €4.86 Price €4.86

Electromagnet 24V 3W 2,5kgf

The holding electromagnet powered with the voltage of 24 V with a power of 3 W. It holds a weight of 2.5 kg in standard earth acceleration of 9.8 m/S2. Case diameter is 20 mm,...
Index: MOD-07026
Index: MOD-07026
Czas oczekiwania: ok. 10-30 dni
Regular price €6.72 Price €6.72

Electromagnet 12V 4,2W 180kgf

Holding electromagnet is powered with voltage of 12 V with power of 4.2 W. It keeps the weight of 180 kg by standard earth acceleration of 9.8 m/s2. The dimensions of the...
Index: MOD-08835
Index: MOD-08835
In stock, shipping 24 hours!
(Check quantity)
Regular price €30.00 Price €30.00

Electromagnet 12V 13W 5kg

The device allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm.
Index: MOD-08073
Index: MOD-08073
In stock, shipping 24 hours!
(Check quantity)
Regular price €7.42 Price €7.42