Electromagnet 12V 2,7W 60kgf
Electromagnet 12V 2,7W 60kgf
Electromagnet 12V 2,7W 60kgf
Electromagnet 12V 2,7W 60kgf - zdjęcie 1
Electromagnet 12V 2,7W 60kgf - zdjęcie 2
Electromagnet 12V 2,7W 60kgf - zdjęcie 3

Electromagnet HT-60 12V 2,7W 64kgf

Index: MOD-06730

Holding electromagnet is powered with voltage of 12 V with the power of 2.7 W. It keeps the weight of 64 kg by standard earth acceleration of 9.8 m/s2. The dimensions of the electromagnet are 80 x 40 x 24 mm. Included is a set of mounting screws.

€23.25
€18.91 tax excl.

In stock, shipping 24 hours!
(Check quantity)
Shipping in 24 hours
30-day returns

Description

Holding electromagnet is powered with voltage of 12 V with the power of 2.7 W. It keeps the weight of 64 kg by standard earth acceleration of 9.8 m/s2. The dimensions of the electromagnet are 80 x 40 x 24 mm. Included is a set of mounting screws.

 

 

The device can be used as an actuator controlled by any microcontroller, e.g. an Arduino. Please note that an electromagnet consumes too much power to connect it directly to the pins of the microcontroller. For this purpose, you can use relaysoptical isolator or transistor amplifier.

 

Attention!

The manufacturer recommends maintaining a good heat dissipation from the housing, because with the temperature rise of the coil, the force that holds, decreases.

 Specification

  • Supply voltage: 12 V
  • Power: 2.7 W
  • Current consumption: approx. 220 mA
  • Load: 64 kgf (holding a weight of 64 kg for the gravitational acceleration of 9.8 m/S2)
  • The wires with insulation removed at the ends with the length of about 12 cm.
  • Set has installation screws
  • Temperature limit: 130 °C
  • Electromagnet dimensions: 80 x 40 x 24 mm
  • The dimensions of the metal board: 75 x 32 x 11 mm

Included

  • Electromagnet
  • Metal board
  • Set of installation screws
  • Hex key

Same-day shipping

Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day! 

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia, Spain, The United Kingdom

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Cyprus, Finland, Greece, Ireland, Malta, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR


Be the first to ask a question about this product!

No customer reviews for the moment.

Customers who bought this product also bought:

Power supply DIN60W12 DIN - 12V / 5A / 60W

Power supply mounted on a DIN rail. Input voltage: 200 V to 240 V AC. Output voltage is 12 V. Output current up to 5 A.
Index: ZAS-06387
Index: ZAS-06387
Available, 24h shipping!
(Check quantity)
Regular price €17.21 Price €17.21

8 channel optoisolation relay module - 10A/250VAC contacts - 12V coil - red

The module has eight SRD-12 relays with a coil powered with the voltage of 12 V, with optoelectronic insulation. The system allows you to control the actuators using the...
Index: MOD-02699
Index: MOD-02699
In stock, shipping 24 hours!
(Check quantity)
Regular price €9.28 Price €9.28

Raspberry Pi 3 model B WiFi Bluetooth 1GB RAM 1,2GHz

A new edition of the popular minicomputer Raspberry Pi version 3. This model features a more powerful processor Broadcom BCM2837 quad-core 64-bit ARM-8 Cortex-A53 with a clock...
Index: RPI-05576
Index: RPI-05576
In stock, shipping 24 hours!
(Check quantity)
Regular price €39.30 Price €39.30

Extension of pins 74HC595 SPI to Banana Pi

The extension allows to increase the number of Banana Pi digital outputs by 32 one-way I/O pins. It communicates via SPI bus, uses 74HC595 circuits.
Index: BNN-03754
Index: BNN-03754
Unavailable
Regular price €9.74 Price €9.74

Magnetic sensor to open door/window - reed contact CMD918

Wired proximity sensor activated magnetically. The device is used to determine the position of doors and windows. Case dimensions - 9.5 x 18 mm.
Index: SES-03126
Index: SES-03126
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.60 Price €1.60

Door open limit switch - black

A simple door opening sensor in black plastic case. Pressing the bolt causes an open circuit between the two contacts.
Index: SES-03794
Index: SES-03794
Czas oczekiwania: ok. 10-30 dni
Regular price €0.67 Price €0.67

Connecting cables female-male 30cm colored - 50pcs

Set of 50 high-quality connecting cables with a length of 30 cm in different colours.
Index: KAB-01438
Index: KAB-01438
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.49 Price €6.49

Male plug cables - crocodile - 10pcs

Set of 10 wires. On one side is a standard male plug (goldpin plug), on the other end is the crocodile connector.
Index: KAB-01245
Index: KAB-01245
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.63 Price €2.63

Cylindrical neodymium magnet - 5x10mm - 5pcs

Neodymium cylindrical magnet with dimensions of 5 x 10 mm. Neodymium magnets have a very large attractive force due to the very high energy density. They have a lifetime...
Index: MAG-05721
Index: MAG-05721
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.38 Price €1.38

Relay module combined light-operated switch 12V 10A/250VAC

The module is equipped with SRD-12 relay with a coil powered with a voltage of 12 V with mounting holes. The system allows you to control the actuators depending on the...
Index: MOD-06253
Index: MOD-06253
Czas oczekiwania: ok. 10-30 dni
Regular price €3.70 Price €3.70

Arduino Uno Rev3 - module A000066

The original module from the Arduino Uno with the AVR microcontroller ATmega328 in an interchangeable housing. It has 32 KB Flash memory, 2 KB RAM, 14 digital I/o of which 6...
Index: ARD-01060
Index: ARD-01060
In stock, shipping 24 hours!
(Check quantity)
Regular price €21.40 Price €21.40

RFID MF RC522 module 13.56MHz SPI + card and keychain

The board that allows you to read and write data from RFID devices at 13.56 MHz. The module is based on a RC522, is supplied with the voltage of 3.3 V, communication via SPI....
Index: MOD-06765
Index: MOD-06765
Czas oczekiwania: ok. 10-30 dni
Regular price €3.00 Price €3.00

Products from the same category

Pulling electromagnet 12V 8,4W 3,5kg

A device which, under the influence of providing a 12-volt voltage pulse, performs a pulling linear motion. The range of the electromagnet pin is 12 mm and its maximum load...
Index: DNG-17762
Index: DNG-17762
Available, 24h shipping!
(Check quantity)
Regular price €8.30 Price €8.30

Solenoid, coil, 5V electromagnet - SparkFun ROB-11015

The device allows to perform a linear movement, for example, pulling or pushing, using the voltage signal of 5 V. The range of the bolt is approximately 4.5 mm.
Index: SPF-01996
Index: SPF-01996
In stock, shipping 24 hours!
(Check quantity)
Regular price €5.79 Price €5.79

Electromagnet holding 12V 6W 60kgf

Holding electromagnet with a rated power of 6 W. For operation it requires a voltage pulse of 12 V . With standard ground acceleration of 9.8 m/s2 the maximum lifting...
Index: DNG-17579
Index: DNG-17579
Available, 24h shipping!
(Check quantity)
Regular price €14.63 Price €14.63

Electromagnet holding 12V 1W 80mA 1kgf

Holding electromagnet, supplied with 12 V . At standard ground acceleration (9.82 m/s2) it holds a mass of 1 kg . The current consumption is approx. 80 mA, the rated power is...
Index: DNG-17565
Index: DNG-17565
Available, 24h shipping!
(Check quantity)
Regular price €8.12 Price €8.12

Electromagnet holding 12V 3,5W 30kgf

Holding electromagnet with a power rating of 3.5 W. Powered by 12 V . Current consumption is approximately 300 mA. The device maintains a mass of 30 kg at standard ground...
Index: DNG-17574
Index: DNG-17574
Available, 24h shipping!
(Check quantity)
Regular price €7.60 Price €7.60

Electromagnet 12V 3,5W 4kgf

The holding electromagnet powered with the voltage of 12 V with a power of 3.5 W. It holds a weight of 4 kg in standard earth acceleration of 9.8 m/s2. Case diameter is 25 mm,...
Index: MOD-04599
Index: MOD-04599
In stock, shipping 24 hours!
(Check quantity)
Regular price €10.23 Price €10.23

Electromagnet holding 12V 6W 55kgf

Holding electromagnet with a rated power of 6 W. Powered by 12 V . Current consumption is approximately 500 mA. The device maintains a mass of 55 kg at standard ground...
Index: DNG-17578
Index: DNG-17578
Available, 24h shipping!
(Check quantity)
Regular price €11.60 Price €11.60

Electromagnet holding 12V 13W 120kgf

Powered by a 12-volt holding electromagnet, with a maximum load capacity of 120 kg (at standard ground acceleration of 9.8 m/s2). The device takes about 1.1 A during...
Index: DNG-17582
Index: DNG-17582
Available, 24h shipping!
(Check quantity)
Regular price €30.00 Price €30.00

Electromagnet 12V 13W 5kg

The device allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm.
Index: MOD-08073
Index: MOD-08073
In stock, shipping 24 hours!
(Check quantity)
Regular price €7.42 Price €7.42

Electromagnet holding 12V 10W 70kgf

Powered by a 12-volt holding electromagnet, which holds a mass of 70 kg at standard ground acceleration (9.8 m/s2). The current consumption during operation is...
Index: DNG-17580
Index: DNG-17580
Available, 24h shipping!
(Check quantity)
Regular price €18.07 Price €18.07

Electromagnet holding 12V 15W 240kgf

Holding electromagnet with a maximum lifting capacity of 240 kg (at standard ground acceleration of 9.8 m/s2). Powered by 12 V . Current consumption is approx. 1.25 A. Rated...
Index: DNG-17583
Index: DNG-17583
Available, 24h shipping!
(Check quantity)
Regular price €39.51 Price €39.51

Electromagnet 12V 21W 150g

The device allows to perform a linear - pulling motion with a voltage signal of 12 V. The range of the bolt is approximately 10 mm.
Index: MOD-08072
Index: MOD-08072
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.49 Price €6.49