WiFi module ESP-12S ESP8266 Black - 9 GPIO, ADC, PCB antenna

Index: DNG-10704 EAN: 5904422300623

Wi-fi module based on the ESP8266 chip. It works in standard wi-fi 802.11 b/g/n at 2.4 GHz. It is equipped with 16 pins - pitch of 2 mm, 9 of which is GPIO, 1 ADC and UART. It has a built-in LED and a PCB antenna. The board size: 24 x 16 mm. The system is compatible with ESP-12E, ESP-12F.

WiFi module ESP-12S ESP8266 Black - 9 GPIO, ADC, PCB antenna
€4.90
€3.98 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: OEM

Description

Wi-fi module based on the ESP8266 chip. It works in standard wi-fi 802.11 b/g/n at 2.4 GHz. It is equipped with 16 pins - pitch of 2 mm, 9 of which is GPIO, 1 ADC and UART. It has a built-in LED and a PCB antenna. The board size: 24 x 16 mm. The system is compatible with ESP-12E, ESP-12F.

 

Compared tothe previous version of ESP-12E, ESP-12S has less pins and best wi-fi range, thanks to the improved antenna, the whole system is more stable. It differs from the previous version in the absence of pins on the short side of the module.

 

In our offer, you will also findan adapter that allows you to attach the chip into the breadboard.

 

 

Features of the ESP-12E module

Features that distinguish the ESP-12E module on the background of the whole family of ESP-XX:

  • It has 16 pins:
    • 9 x GPIO - digital outputs/inputs
    • 1 x ADC input - analog-to-digital converter
    • 2 x UART (TX, RX) - for communicating, for example with Arduino
  • Mounting: SMD / THT:
    • Hole diameter: 0.9 mm
    • Pins' pitch: 2 mm
  • The default transfer rate of UART communication: 115200 bps
  • It is equipped with built-in PCB antenna
  • Shielded module
  • Dimensions: 24 x 16 mm

 

Connection

The module has 16 pins, pitch of 2 mm.

Moduł WiFi ESP-12E ESP8266

Pin Description
TxD The transmitter of the serial interface UART.
RxD The receiver of the serial interface UART.
GPIO x GPIO pin (digital output/ input) with a serial number.
GPIO 0 GPIO with special function:

To update, you need to indicate the low status (connect to GND).

GPIO 15

GPIO No. 15 with a special function:

In normal and programming mode should indicate the low status (conect to GND).

ADC Input of analog-to-digital converter.
REST The system reset.

EN

(CH_PD)

Power down - indication of low status causes a transition to sleep mode.

To update, you need to indicate a high status (3.3 V).

VCC The power supply is 3.3 V.

 

The product is compatible with Arduino

Instruction of connecting the module with Arduino basing on the module ESP-01, you can find on the blog Majsterkowo and in guide prepared by us.

 

The board tolerates a voltage of 3.3 V. Therefore, you must choose Arduino operating with the voltage of 3.3 V or use a converter.

 

Specification

  • Supply voltage: 3.3 V
  • Current consumption at rest: approx. 10 µA
  • Chip: ESP8266
  • Flash memory: 4 MB
  • Standard: wi-fi 802.11 b/g/n
  • It operates in the 2.4 GHz frequency
  • It supports WPA / WPA2 protections
  • It can work in AP mode (Access Point), STA mode (standalone) and AP+STA mode
  • It supports AT commands
  • Communication: UART (Rx, Tx)
  • The default UART speed: 115200 bps
  • Mounting SMD or THT
  • Pins pitch: 2 mm
  • Hole diameter: 0.9 mm
  • It has 16 pins, pitch of 2 mm
    • 9 x GPIO - digital outputs/inputs
    • 1 x ADC input - analog-to-digital converter
  • Lua software support 
  • Board sizes: 24 x 16 mm

 

UC - Microcontroller ESP-8266
Package width 5 cm
Package height 0.3 cm
Package depth 7 cm
Package weight 0.003 kg

Be the first to ask a question about this product!

Product reviews

WiFi module ESP-12S ESP8266 Black - 9 GPIO, ADC, PCB antenna

5/5

Average grade

1

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.
Taras 30.01.2024 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: