Programowalny moduł bezprzewodowy Wixel
Programowalny moduł bezprzewodowy Wixel
Programowalny moduł bezprzewodowy Wixel
Programowalny moduł bezprzewodowy Wixel  - zdjęcie 1
Programowalny moduł bezprzewodowy Wixel  - zdjęcie 2
Programowalny moduł bezprzewodowy Wixel  - zdjęcie 3

Ethernet network module ENC28J60 mini

Index: MOD-01512 EAN: 5904422301606
BOTLAND B. DERKACZ SPÓŁKA JAWNA Opinie z ekomi-pl.com

A module that enables the connection of the microcontrollers and development kits, including the Arduino, with the Ethernet network via the SPI interface. The system in mini-version with the size: 51 x 19 x 16 mm

€7.19
€5.85 tax excl.

In stock, shipping 24 hours!
(Check quantity)
Shipping in 24 hours
30-day returns
PayPal payment

Description

A module that enables the connection of the microcontrollers and development kits, including the Arduino, with the Ethernet network. The communication interface is the popular, digital SPI bus. On the board is Ethernet RJ-45  slot for the network cable and goldpin pins for connection to the main board. The supply voltage of the system is 3.3 V and the dimensions of the whole are: 51 x 19 x 16mm.

Moduł ENC28J60 podłączony z Arduino

 

Available is alibrary for the Arduinomodule, along witha user manual for connection.

 

Moduł ENC28J60 mini z gniazdem Ethernet

 

Specification

  • Supply voltage: 3.3 V
  • Maximum transfer rate: 25 MHz
  • Communication interface: SPI
  • The MAC address should be set in the program
  • Module type: 10Base-T
  • Operating temperature: -40 °C to 85 °C
  • Dimensions: 51 x 19 x 16 mm

 

Details inthe documentationof the chip ENC28J60.

 

Pins

The module has goldpin pins for connecting with anydevelopment kit or dedicated PCB using the availablewires. The arrangement of pins is shown in the figure below.

 

Table describes the description of pins of the Ethernet ENC28J60 mini module

Name

Description

VCC

Supply voltage is 3.3 V.

GND

The potential ground of the system.

RESET

The reset of the system is activated with the low status. By default, it is in the high status - internally pulled up to VCC (pull-up). The pin tolerates the voltage of 5V.

CS

Chip select - selects a device of the SPI bus. It is activated with the low status. By default it is in the high status - internally pulled up to VCC (pull-up). The pin tolerates the voltage of 5V.

SCK

The clock input of the SPI bus. Pin tolerates the voltage of 5V.

SI

Line of the input data of the SPI bus. Pin tolerates the voltage of 5V.

SO

Line of the output data of the SPI bus. Pin tolerates the voltage of 5V.

CLKOUT

Programmable output clock line.

WOL

Must be left not connected

INT

Internal interrupt output .

 

 

Same-day shipping

  • Crediting the payment for the order on our account on a business day before 10:00 AM means sending the goods on the same day.
  • All packages are being delivered by GLS Group courier and covered with insurance up to 1200 EUR.
  • You will receive a link to track your package and monitor the progress of delivery as soon as it is shipped.

Terms of delivery 

GLS - zone 1

Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Poland, Slovakia 

  • Delivery time: 2-4 days
  • Delivery cost: from 4.18 EUR
  • Insurance: 1200 EUR
GLS - zone 2

Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, San Marino, Slovenia

  • Delivery time: 2-5 days
  • Delivery cost: from 5.35 EUR
  • Insurance: 1200 EUR
GLS - zone 3

Finland, Greece, Ireland, Lichtenstein, Spain, Sweden 

  • Delivery time: 2-7 days
  • Delivery cost: from 7.67 EUR
  • Insurance: 1200 EUR

Payment methods

Card image cap
PayPal
  • Botland is a PayPal verified seller. Protect your financial information with this fast, safe and secure online payment system.

Card image cap
PayU
  • Choose easy and quick PayU e-payment method. Your financial information will stay secure.

You might also like

STM32F407G-DISC1 - Discovery - STM32F4DISCOVERY

The commissioning kit is built on the basis of STM32F407VGT6 microcontroller, it allows you to get to know the systems equipped with the latest Cortex-M4F core from ARM...
Index: DIS-00445
Index: DIS-00445
Waiting for confirmation of delivery date
Regular price €23.32 Price €23.32

STM32F3 - Discovery - STM32F3DISCOVERY

Module based on STM32F303VCT6 microcontroller having Cortex-M4F core with hardware floating point unit. The board also includes: gyroscope, accelerometer with magnetometer and...
Index: DIS-00957
Index: DIS-00957
Waiting for confirmation of delivery date
Regular price €19.78 Price €19.78

Female-male connecting cables 20cm black - 10pcs

Set of 10 connection cables with a length of 20 cm in black color.
Index: KAB-01020
Index: KAB-01020
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.52 Price €1.52

Arduino Uno Rev3 - module A000066

The original module from the Arduino® Uno with the AVR microcontroller ATmega328 in an interchangeable housing. It has 32 KB Flash memory, 2 KB RAM, 14 digital I/o of which...
Index: ARD-01060
Index: ARD-01060
In stock, shipping 24 hours!
(Check quantity)
Regular price €21.78 Price €21.78

Arduino Mega 2560 Rev3 - module A000067

Popular module with microcontroller AVR ATmega2560 . It has 256 KB Flash memory, 8 KB RAM, 54 digital inputs/outputs, of which 15 can be used as PWM channels, 16 analog...
Index: ARD-01062
Index: ARD-01062
In stock, shipping 24 hours!
(Check quantity)
Regular price €34.98 Price €34.98

Arduino Mega ADK Android Rev3

Popular module with AVR ATmega2560 microcontroller. It has 256 kB of flash memory, 8 kB of RAM, 54 digital inputs/outputs of which 15 can be used as PWM channels, 16...
Index: ARD-01064
Index: ARD-01064
Unavailable
Regular price €45.98 Price €45.98
  • EOL

Arduino Leonardo - module A000057

Popular module with AVR microcontroller Atmega32U4. Has 32 KB Flash memory, 2.5 KB RAM, 20 digital inputs/outputs, of which 7 can be used as PWM channels and 12 as analog...
Index: ARD-01213
Index: ARD-01213
In stock, shipping 24 hours!
(Check quantity)
Regular price €19.36 Price €17.42
  • Reduced price
  • On sale

Connecting cables female-male 20cm red - 10pcs

Set of 10 high quality connecting cables with a length of 20 cm in red.
Index: KAB-01400
Index: KAB-01400
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.52 Price €1.52

Customers who bought this product also bought:

Connecting cables female-female 20cm - 40pcs.

Set includes 40 PCs of multi-colored connection cables with a length of 20 cm ended from both sides with the female connector on goldpin.
Index: KAB-01021
Index: KAB-01021
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.31 Price €1.31
  • On sale!

Raspberry Pi Model B 512MB RAM

Raspberry Pi Model B (512MB RAM) is a miniature computer that can successfully replace a large office device. The module allows you to process video in high definition. Has:...
Index: RPI-00972
Index: RPI-00972
Waiting for confirmation of delivery date
Regular price €34.98 Price €34.98

AVR microcontroller - ATmega88PA-AU SMD

Popular microcontroller AVR from ATmel in the case soldered on surface (SMD).
Index: UCC-01053
Index: UCC-01053
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.91 Price €4.91

Linear voltage regulator LDO 5V LM1117MP - SMD SOT223

Low-Dropout linear stabilizer. Output voltage: 5 V. Maximum output current: 0.8 A. Housing: SOT-223.
Index: UCC-01117
Index: UCC-01117
Unavailable
Regular price €0.20 Price €0.20
  • EOL

L293D - two-channel 36V / 0,6A motor driver - 5pcs

Two-channel motor controller. Supply voltage up to 36 V . Average current per channel 600 mA (momentary up to 1.2 A). Enclosure: DIP 16 (scrolling). Set contains 5 pieces of...
Index: UCC-00176
Index: UCC-00176
Available, 24h shipping!
(Check quantity)
Regular price €2.18 Price €2.18

SD card reader module

The module that facilitates the connection of the SD card to the main board (e.g. Arduino or STM32Discovery). It is powered with the voltage of 5 V or 3.3 V. The communication...
Index: MOD-01507
Index: MOD-01507
In stock, shipping 24 hours!
(Check quantity)
Regular price €1.21 Price €1.21

Cable for analog Sharp distance sensors - Pololu 117

Cable with JST plug for analog distance sensors from Sharp company. Length: 30 cm
Index: PLL-00028
Index: PLL-00028
In stock, shipping 24 hours!
(Check quantity)
Regular price €0.86 Price €0.86

Tantalum capacitor 100uF/10V SMD - C

Capacitance: 100 uF, Voltage: 10 V Tolerance: 10% Case: SMD C
Index: PAS-00430
Index: PAS-00430
Unavailable
Regular price €0.22 Price €0.22

Converter MAX232N - THT - 5pcs

The circuit is used to convert the voltage port RS-232 to TTL standard. Set of 5 pcs chips.
Index: UCC-00082
Index: UCC-00082
In stock, shipping 24 hours!
(Check quantity)
Regular price €2.18 Price €2.18

AVR microcontroller - ATmega16A-PU - DIP

Popular microcontroller AVR from Atmel in a DIP case.
Index: UCC-00115
Index: UCC-00115
Waiting for confirmation of delivery date
Regular price €6.14 Price €6.14

AVR microcontroller - ATtiny2313A-PU

Atmel microcontroller AVR in 20-led DIP case. Voltage supply range from 1.8 V to 5.5 V, with a clock signal frequency to 20 MHz, has a 2 KB Flash, 128 B RAM, 128 B EEPROM.
Index: UCC-00163
Index: UCC-00163
Waiting for confirmation of delivery date
Regular price €2.84 Price €2.84

Converter FT232RL - SMD

Converter USB-UART in SMD case.
Index: UCC-00164
Index: UCC-00164
Unavailable
Regular price €4.16 Price €4.16
  • EOL

Products from the same category

Ethernet network module ENC28J60

A module that enables connection of the microcontrollers and development kits  including the Arduino with the Ethernet network via the SPI interface.
Index: MOD-01471
Index: MOD-01471
In stock, shipping 24 hours!
(Check quantity)
Regular price €6.58 Price €6.58

Ethernet Shield W5100 for Arduino with microSD card reader

Module based on W5100, allowing users of Arduino, a simple way to connect with Ethernet. Works with the Arduino Uno and Mega 2560. It has also a device for reading memory cards...
Index: MOD-03779
Index: MOD-03779
In stock, shipping 24 hours!
(Check quantity)
Regular price €16.94 Price €16.94

Arduino Ethernet Shield 2 with microSD reader- A000024

Shield for Arduino allows users to easily connect to the Ethernet network. Module based on W5500, it also has a microSD card slot.
Index: ARD-03926
Index: ARD-03926
In stock, shipping 24 hours!
(Check quantity)
Regular price €25.30 Price €25.30

Ethernet network module Shield v1.0 for Arduino Nano

This module allows to connect Arduino Nano microcontroller to Ethernet network. On the board there is RJ-45 Ethernet socket for network cable and soldered goldpin pins...
Index: DNG-19944
Index: DNG-19944
Available
(Check quantity)
Regular price €6.58 Price €6.58

iNode LAN - Bluetooth gateway

iNode LAN gives access to iNode Bluetooth BLE devices in networks with the Ethernet protocol. With this module you can increase the range of iNode Care Sensor sensors in the...
Index: INO-09963
Index: INO-09963
In stock, shipping 24 hours!
(Check quantity)
Regular price €41.58 Price €41.58

Ethernet network module DP83848 SNI RMII - Waveshare 4141

Module with a single Ethernet 10/100 Mbit/s RJ45 port. The board is based on DP83848 system, it is working with the voltage of 3.3 V, it communicates with the RMII and SNI...
Index: WSR-05634
Index: WSR-05634
In stock, shipping 24 hours!
(Check quantity)
Regular price €12.32 Price €12.32

TTN-GW-868 - IoT LoRaWAN 868MHz network gateway - Ethernet, WiFi

LoRa WAN base station for connecting IoT sensors to the Internet of Things via Ethernet or WiFi. The device provides an access gateway for various modules . It operates at...
Index: TTN-11851
Index: TTN-11851
Waiting for confirmation of delivery date
Regular price €364.98 Price €364.98

PoE adapter - power supply via LAN - RJ45 to DC connector - 2 pcs.

Power over Ethernet (PoE) adapter is used to power the network devices via the popular twisted-pair. It is useful in a situation when connecting power supply is difficult or...
Index: KAP-04569
Index: KAP-04569
Waiting for confirmation of delivery date
Regular price €2.40 Price €2.40

Ethernet ENC28J60 network module - 3,3V/5V

A module that enables connection of the microcontrollers and commissioning sets , including Arduino, with the Ethernet network via the SPI interface. It works with a voltage...
Index: MOD-08868
Index: MOD-08868
In stock, shipping 24 hours!
(Check quantity)
Regular price €4.60 Price €4.60

ATB-ETHERNET

Universal module of the network card of 10 MB based on the ENC28J60 system from Microchip. It was designed for ATB development kits from ATNEL, it can also be used in your own...
Index: ATN-09598
Index: ATN-09598
Waiting time approx. 5-10 days
Regular price €16.50 Price €16.50

Arduino Ethernet Shield ASX00006 MKR - Shield for Arduino MKR

Shield for Arduino MKR enabling the connection to the Ethernet network . It is equipped with a system W5500 and a connector for microSD cards. It c ommunicates via the SPI...
Index: ARD-12951
Index: ARD-12951
Waiting time approx. 3-4 weeks
Regular price €34.32 Price €34.32

Ethernet Shield W5100 for Arduino + microSD card reader - Okystar OKY2101

Arduino overlay based on W5100 Ethernet chip which allows to connect our Arduino to the network using RJ-45 cable . The overlay supports up to 4 simultaneous connections ....
Index: OKY-16559
Index: OKY-16559
Waiting time approx. 6-8 weeks
Regular price €31.90 Price €31.90