









Module with fingerprint reader communicating through serial interface UART (RX, TX). It has a memory where you can store up to 1000 fingerprints of different people and export them to a computer or other reader. The device consists of two modules.
Fingerprint reader module equipped with a 32-bit STM32F205 microcontroller, communicating via simple commands sent via UART (RX, TX) serial interface. The sensor has a memory that allows you to save up to 1000 fingerprints and transfer data in the form of photos or a database of patterns to a computer via a USB-UART adapter , microcontroller or other reader.
The module cooperates with microcontrollers equipped with serial interface (RX, TX lines), including Arduino and Raspberry Pi mini computer .
The manufacturer has prepared an application for Windows and a sample code together with a library for STM32. |
The system has six leads:
Pin | Description |
---|---|
VCC | Supply voltage from 3.3 V to 7.5 V. |
GND | The weight of the system. |
TX | UART serial interface - transmitter. |
RX | UART serial interface - receiver. |
BL | Backlight control, usually unconnected. |
RST | Reset the system. |
Useful links |
Test | 3 |
Posting the payment for the order on our account on a business day up to 10 AM means sending the goods on the same day!
The time of payment depends on the ELIXIR's hours session of the sender's bank and the recipient of the transfer. It may take up to 2-4 working days.
Only for prepaid orders shipped to Poland.
Austria, Belgium, Croatia, The Czech Republic, Denmark, Germany, Netherlands, Slovakia
Bulgaria, Estonia, France, Hungary, Italy, Latvia, Lithuania, Luxembourg, Portugal, Romania, Slovenia
Finland, Greece, Ireland, Sweden, Cyprus, Malta, Spain
No customer reviews for the moment.
Arduino Uno Rev3 - module A000066
The original module from the Arduino Uno with the AVR microcontroller ATmega328 in an interchangeable housing. It has 32 KB Flash memory, 2 KB RAM, 14 digital I/o of which 6...Arduino Mega 2560 Rev3 - module A000067
Popular module with microcontroller AVR ATmega2560 . It has 256 KB Flash memory, 8 KB RAM, 54 digital inputs/outputs, of which 15 can be used as PWM channels, 16 analog...Customers who bought this product also bought:
Camera HD D OV5647 5Mpx camera - for Raspberry Pi - Waveshare 11297
Camera module with OV5647 sensor, connected to a special connector of minicomputer Raspberry Pi, version 3, 2, B+, A+ and older A and B. The device has a matrix CCD 1/4" with...Set of Raspberry Pi 3B + 32GB microSD + accessories
The kit includes the Raspberry Pi model B in version 3 with a 2.5 A power supply and one of the most practical and popular enclosures - RS Pro with flap and heat sinks. A 32 GB...Arduino Box - case for Arduino - A000009
Housing for Arduino modules. In addition to space for the main module, the box also has space for a shield and 9 V battery.Solenoid, coil, 5V electromagnet - SparkFun ROB-11015
The device allows to perform a linear movement, for example, pulling or pushing, using the voltage signal of 5 V. The range of the bolt is approximately 4.5 mm.Step-Up/Step-Down Voltage Regulator S18V20ALV - 4-12V 2A - Pololu 2572
Step-up/step-down converter with adjustable output voltage from 4 V to 12 V . Maximum current 2 A. Power supply 2.9 V - 32 V .Big Push Button 10cm - blue - SparkFun COM-11274
Big button with an outer diameter of 10 cm with the built-in LED illuminating the dome.Adjustable digital distance sensor E18-D80NK 5-80cm
Adjustable, digital distance sensor with a cable length of 50 cm and nuts to facilitate mounting. Measuring range from 5 to 80 cm, is configured using a knob. Voltage supply...Intel Edison + Arduino Breakout Kit
Included is Intel Edison platform with Arduino Uno compatible board. Thanks to its use the user can connect so called Arduino Shields and use digital outputs known from Arduino.Romeo v2 ATmega32u4 - all in one controller - compatible with Arduino
DFRobot module compatible with Arduino Leonardo. In addition to the traditional features of this type of board has a connector for XBee modules, a two-channel 32V/2A motor...DFRobot GPS/GPRS/GSM SIM908 Shield for Arduino v3
Overlay to Arduino, which allows you to send text messages, create GSM network connections, transfer GPRS data and read GPS position. It communicates through serial interface...Products from the same category
Grove - capacitive fingerprint scanner KCT203 - UART - Seeedsudio 101020713
The capacitive fingerprint reader module, based on the KCT203 chip, has a built-in high performance GD32 main circuit, a vertical RF push fingerprint reader and a touch...Grove - finger print reader - ZMF-20 - TTL
Grove series module with ZMF-20 optical fingerprint reader. It has a powerful AS601 DSP processor which is responsible for image rendering, calculations and searching. The...Fingerprint reader - TTL GT-521F32 - 200 fingerprint memory - SparkFun SEN-14518
Module with the fingerprint reader, communicating through a serial UART interface (RX, TX). It has a memory, in which it can store up to 1000 fingerprints of different people...Fingerprint reader Z70 - fingerprint sensor
Module for recognition and storage of fingerprints. It has a built-in DSP processor. It is communicating via UART interface (RX, TX), it is compatible with Arduino and other...JST SH 4 PIN 20 cm cable + socket - SparkFun PRT-10359
4 - vein connecting cable ended on one side with connector of JST SH, on the other, with the removed insulation. Wire's length is approximately 20 cm, the kit also has a JST...