Velleman VMA430 - GPS / GLONASS u-Blox NEO-7M UART module with antenna

Index: VEL-13032 EAN: 5410329729714

GPS / GLONASS NEO-7M module on board with goldpin connectors mounted. It supports 56 channels, operates from 3.3 V to 5 V, communicates via the UART interface (TX, RX), and the refresh rate is up to 5 Hz.

Velleman VMA430 - GPS / GLONASS u-Blox NEO-7M UART module with antenna
€36.00
€29.27 tax excl.
Available
Shipping in 24 hours
PayPal payment
Manufacturer: Velleman
Compatibility: Arduino

Product description: Velleman VMA430 - GPS / GLONASS u-Blox NEO-7M UART module with antenna

GPS / GLONASS NEO-7M-C module on board with goldpin connectors. It supports 50 channels, operates from 3.3 V to 5 V, communicates via UART interface (TX, RX), and refresh rate is up to 5 Hz. The module is equipped with straight goldpins.

The chip has soldered straight goldpin connectors and a ceramic antenna.

Main features of Velleman VMA430

  • GLONASS system - Russian satellite navigation system covering the whole globe.
  • Simple communication - device communicates through simple UART interface, i.e. RX and TX pins with default speed 9600 bps. Thanks to wide voltage range, it can work with both 3.3 V devices, like STM32 and Raspberry Pi, and 5 V devices, like Arduino
  • Built-in ceramic antenna - gives sensitivity of -162 dB. Additionally, the module is equipped with SMA connector for connecting external antenna.
  • Backup battery - on the back side there is a battery that allows you to keep data in the device during a power outage.

The manufacturer provides user's guide with description of module operation.

Connection and sample program

The chip has 5 goldpin pins - raster 2,54 mm. Their functions are described in the table below.

Pin Description
VCC Supply voltage 3.3 V or 5 V.
GND System ground.
TXD Serial interface transmitter to be connected to the microcontroller receiver (RX).
RXD . Serial interface receiver, which must be connected to the microcontroller transmitter (TX).
PPS Optional pulse-per-second signal output of the GPS module.

Technical specification of GPS / GLONASS u-Blox NEO-7M UART module with antenna

  • Supply voltage: 3.3 V to 5 V or via microUSB
  • Current consumption: 50 mA
  • uBlock NEO-7M module(documentation)
  • Support for GLONASS system
  • Communication: UART
  • Position accuracy: 2,5 m
  • Sensitivity: -161 dBm
  • Refresh rate: 5 Hz (default 1 Hz)
  • Warm start / cold start: 1 second / 30 seconds
  • Has built-in antenna and connector for external SMA version

Package width 8 cm
Package height 4 cm
Package depth 15.5 cm
Package weight 0.023 kg

Be the first to ask a question about this product!

Product reviews

Velleman VMA430 - GPS / GLONASS u-Blox NEO-7M UART module with antenna

4.6/5

Average grade

5

Customers opinion
The following opinions are collected
and verified by
an external partner Trustmate
and come from the post-purchase process.
Radek 26.10.2023 Confirmed purchase Translated review
Works great!
Krzysztof 22.05.2023 Confirmed purchase Translated review
Solid workmanship. Inside a building requires an external antenna (but this is rather normal). Documentation is best found on the u-blox website. Convenient software makes it easy to view the status of synchronization with satellites.
Adam 04.12.2022 Confirmed purchase Translated review
The built-in antenna is useless, I don't know why it's there. It works flawlessly with the real thing.
Paweł K. 27.02.2022 Confirmed purchase Translated review
It has been working since the first start.
Adam 08.05.2023 Confirmed purchase

Customers who bought this product also bought:

Products from the same category: