Description
GPS module UBX-G7020-KT communicates through a serial (RX, TX) interface, it has 56-channel receiver, it works with a voltage from 3.3 V to 5 V. The system has a built-in antenna with the sensitivity of -161 dBm. The update frequency is from 1 to 10 Hz. Measurement accuracy reaches even below 2 meters.
|
The product is compatible with Arduino The manufacturer providesthe Arduino libraryalong withthe user manual. |
Set includes: GPS module, cable and case.
Specification
- Update frequency: from 1 to 10 Hz
- Current consumption: 30 mA
- 56-channel receiver
- Communication: serial UART interface
- High sensitivity: -161 dBm
- Accuracy:
- Autonomous: 2.5 m
- SBAS: below 2 m
- Operating temperature: - 40 to 85 °C
- Cold start: 29 sec
- Warm start: 28 s
- Hot start: 1 sec.
- Module dimensions: 28 x 28 x 8.6 mm
- Case dimensions: 37 x 48 x 16 mm
The module connection
| Pin | Description |
|---|---|
| PPS - white wire | Pulse output. |
| VCC - red wire | Powered by 3.3 V to 5 V. |
| TXD - blue wire | UART communication transmitter. |
| RXD - green wire | UART communication receiver . |
| GND - black wire | The ground of the system. |
| EN - yellow wire | The Enbale pin is activated by the high status. |
Useful links |
